celly BHTWINSACT Bluetooth Stereo Earphones User Manual
- June 3, 2024
- celly
Table of Contents
User manual
BLUETOOTH” STEREO EARPHONES
Model: BHTWINSACT
BHTWINSACT Bluetooth Stereo Earphones
**** Read this user manual and inparticular the safety notes, before using
the product. Keep the user manual for future reference and include it when
passing the product on to third parties.
Celly S.p.A. will not in any way be held responsible for injury or damage
caused to persons or property arising from misuse of the product.
Safety notes
Avoid listening at extreme volumes, particularly for prolonged periods of time
when using the product. If you use the product at an excessively high volume,
you could permanently damage your hearing. Listen at a moderate volume. Audio
warnings, alerts and environmental noises may sound different when wearing the
product.
Be aware of how these signals differ in terms of their sound so that you are
able to recognize the signals in corresponding situations.
Do not use the product when driving motor vehicles, cycling, when operating
machines or in other situations where impaired awareness of noises in your
surroundings could pose a risk to you or others. At the same time, also
observe the legal regulations and provisions in the country where you use the
product. Lay the cable so that it does not pose a tripping hazard. Keep the
cable away from sharp edges and hot areas, and avoid it from clamping or
crushing. To prevent malfunction or damage to the product, avoid accidental
falls, do not crush, puncture or exercise a high level of pressure on the
product.
Keep the product away from humidity, water or other liquids.
Do not store or expose your product to any source of heat, direct sunlight,
radiators, stoves or other heat sources such as the dashboard of your car in
the summer.
Do not try to modify, repair or disassemble the product.
Do not use a damaged product.
Do not under any circumstances use aggressive cleaning agents, alcohol or
other chemical solutions for cleaning as they can damage the housing or even
impair the functionality of the product.
Do not immerse the product in water or other liquids.
There are no serviceable parts inside the product. Never open/disassemble it.
Keep the product out of reach of children.
Never allow children or persons with disabilities to use electrical products
without supervision.
Make sure that children do not play with the plastic wrapping. They may
swallow it when playing and suffocate.
Make sure children do not remove any small parts from the product and play
with them.
USE
Charging
Place the earbuds into the charging box. Make sure the charging button is
pressed.
Turn on
Press and hold the Multifunction button of the headset for about 3 seconds,
then the blue light will flash.
Pairing
Place the headset and the pairing device within 1 meter.
Press and hold the Multifunction button for 6-8 seconds until the red and blue
light flashes alternately, signaling that it is in pairing mode.
Activate your pairing device’s Bluetoothe feature. Search for “BHTWINSACT”,
and select it to connect.
If a password is requested, key in “O000”.
Automatic reconnection
Once the headset and the pairing device have been paired together, they will
automatically be reconnected if they are within distance of each other and the
pairing device’s Bluetooth function is turned on.
Answer a call
Press the Multifunction button to take a call.
Reject a call
Press and hold the Multifunction button to reject a call.
Change track
Press and hold the Multifunction button on the right earphone to switch the
next track.
Press and hold the Multifunction button on the left earphone to switch the
previous track.
Adjusting the volume
Press the multifunction button on the right earphone to increase the volume.
Press the multifunction button on the left earphone to decrease the volume.
Turning off The Headset
Place the earbuds into the charging box. Make sure the charging button is
pressed.
Multi-point function
- Connect the Bluetooth headset with smartphone “A”, and then deactivate the Bluetooth function of the smartphone “A”.
- Connect the Bluetooth headset with smartphone “B”.
- Activate the Bluetooth function of the smartphone “A” again, then the headset will auto connect to the smartphone “A”. Now the Bluetooth headset is connected to smartphone “A” and “B”.
Restore factory settings
In power-off status, hold the multifunction button for 10 seconds until the
red and blue indicators turn off to restore the factory settings.
Cleaning
If necessary, clean the earphones with a damp cloth and let it dry completely
before use.
Do not use any solvents, corrosive or gaseous cleaning agents.
Make sure no water or other liquids penetrate the housing.
Disposal of the product
(Applicable in countries with separate collection systems of recyclable
materials) Old products may not be disposed of in the household waste! Should
the product no longer be capable of being used at some point in time, dispose
of it in accordance with the regulations in force in your country. This
ensures that old products are recycled in a professional manner and also
rules out negative consequences for the environment. For this reason,
electrical equipment is marked with the symbol shown is marked with the symbol
shown here.
**** Batteries and rechargeable batteries may not be disposed of with
household waste! mis product contains a lithium-ion battery that should not be
disposed of with other domestic waste. As the end user you are required by law
to bring all batteries and rechargeable batteries, regardless whether they
contain harmful substances or not, to a collection point run by the communal
authority or to a retailer, so that they can be disposed of in an
environmentally friendly manner.
Technical specifications
Specification Bluetooth@ Version:
Bluetooth@ 5.0
Standby time: 100 hours
Talk time: 3 hours
Music time: 2,5 hours
Earphone charging time: 1,5 hours
Box charging time: 2 hours
Battery: 3.7 V/45 mAh (0.16 Wh)
Li-polymer battery
Box battery Type: Li-polymer Battery
3.7V/460 mAh 1. 7Wh
Wireless distance: 10 m
Software and version: V1.0
Frequency response: 2.4 – 2.4835 GHz
Max power: 5 mW
Earphone size: 19,SX19,SX26mm
Box size: 80x33x31mm
Operation temperature: 09-40C
Single earphone weight: 4.8g
Box weight: 49g
This product complies with Ros 2011/6s/Eu. me product carries the CE mark and
complies with safety standards established by the European Union. Hereby,
Celly SpA declares that the wireless earphones BHTWINSACT is in compliance
with Directive 2014/53/EU. me full text of the EU declaration of conformity is
available at the following internet address: www.celly.com/exchange/CELLY-
SPA/Dichiarazioni_di_conformita/BHTWINSACT/DOC_BHTWINSACT.pdf
Celly@is a trademark owned by registered respective are CELLY S.p.A.
All brands trademarks of their owners.
Imported by CELLY S.p.A., via EnergyPark 22,
20871 Vimercate (MB) – Italy
Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>