Celly PS2USBC65W Wall Charger User Manual
- June 13, 2024
- celly
Table of Contents
Celly PS2USBC65W Wall Charger
Product Information
The WALL CHARGER Model PS2USBC65W is a device designed for charging electronic devices. It is important to read and understand the user manual before using the product to ensure safe and proper usage. The charger is manufactured by Esprinet S.p.A., an Italian company, and it complies with the safety standards established by the European Union. The product is double-insulated and intended for indoor use only.
The technical specifications of the charger are as follows:
- Model: PS2USBC65W
- Compliance: RoHS 2011/65/EU, CE mark
- Input: AC 100-240V
- Output: Voltage, output, and amperage compatibility should be checked with the device being charged
It is important to note that Esprinet S.p.A. will not be held responsible for any injury or damage caused by the misuse of the product.
Product Usage Instructions
Before using the charger, please follow these instructions:
- Ensure that the technical characteristics (voltage, output, and amperage) of your device are compatible with the charger.
- Disconnect all cables from the charger before cleaning.
- If necessary, clean the charger with a damp cloth and let it dry completely before use.
- Use a clean brush with soft, long bristles to remove dust from the connectors.
- Avoid using solvents, and corrosive or gaseous cleaning agents on the charger.
- Make sure no water or other liquids penetrate the housing of the charger.
- Store the charger in a clean, dry area away from direct sunlight.
Please refer to the user manual for further safety instructions and guidelines.
Read this user manual and in particular the safety notes, before using the product.
- Keep the user manual for future reference and include it when passing the product on to third parties.
- Esprinet S.p.A. will not in any way be held responsible for injury or damage caused to persons or property arising from misuse of the product.
Safety notes
- Only connect the product in indoor areas to a properly installed 100–240 V AC socket.
- Only connect the product to an easily accessible socket so that you can quickly disconnect it from the power supply in the event of a problem.
- Do not use the product if it is damaged. Never touch the product with wet or damp hands.
- Only use the product indoors. Do not use in damp rooms or in the rain.
- Never insert metallic objects such as keys or paper clips into the openings of the product.
- To prevent malfunction or damage to the product, avoid accidental falls, do not crush, puncture or exercise a high level of pressure on the product.
- Keep away from humidity, water or other liquids. If the product comes into contact with water, moisture or other liquids, do not use it to avoid any electrical shock or damage.
- Do not store or expose your product to any source of heat, direct sunlight, radiators, stoves or other heat sources such as the dashboard of your car in the summer.
- Never operate the product unsupervised. During operation, the housing may become hot.
- Do not cover the product during use. Never use the product when moving from a cold to a warm environment. Condensation may occur and, in some cases, damage the product. Allow the product to reach room temperature before connecting and using it again. Temperature of use: 0–40 °C.
- Do not try to modify, repair or disassemble the product.
- Do not use a damaged product. Do not under any circumstances use aggressive cleaning agents, alcohol or other chemical solutions for cleaning as they can damage the housing or even impair the functionality of the product. Disconnect all connected cables before you start cleaning. Do not immerse the product in water or other liquids. There are no serviceable parts inside the product. Never open/disassemble it. Keep the product out of reach of children. Never allow children or persons with disabilities to use electrical products without supervision. Make sure that children do not play with the plastic wrapping. they may swallow it when playing and suffocate.
Use
- Before charging your device, make sure its technical characteristics (voltage, output and amperage) are compatible with the charger.
- Connect your device’s USB cable to your device.
- Connect your device’s USB cable to the USB port of the charger.
- Plug the charger into a wall outlet (100–240V AC). Charging of your device will be started.
- Disconnect the charger from the wall socket and your device after use.
Cleaning
- Disconnect all cables before cleaning.
- If necessary, clean the charger with a damp cloth and let it dry completely before use.
- Use a clean brush with soft, long bristles to remove dust on the connectors.
- Do not use any solvents, corrosive or gaseous cleaning agents.
- Make sure no water or other liquids penetrate the housing.
Storage
Store the charger in a clean, dry area. Keep it away from direct sunlight.
Disposal of the product
(Applicable in countries with separate collection systems of recyclable
materials)
Old products may not be disposed of in the household waste! Should the product
no longer be capable of being used at some point in time, dispose of it in
accordance with the regulations in force in your country. This ensures that
old products are recycled in a professional manner and also rules out negative
consequences for the environment. For this reason, electrical equipment is
marked with the symbol shown here.
Technical specifications
- Input voltage: 100-240V AC, 50/60Hz, 1,5A Output voltage USB-C1: 5-9-12-15-20V DC, 2%
- Output current USB-C1: 3-3-3-3-3,25A, 65,0W, 2%
- Output voltage USB-C2: 5-9-12V DC, 2%Output current USB-C2: 3-2,22-1,67, 20,0W, 2%
- Output voltage USB-QC 3.0: 5-9-12V DC, 2%
- Output current USB-QC 3-0: 3-2-1,5A, 18,0W, 2%
- Output voltage USB-A1/2: 5V DC, 2%Output current USB-A1/2: 2,4A, 12,0W, 2%Output power: 65,0W, 2%
- Average active efficiency: 86,64%, 2%Efficiency at low load (10%): 77,94%, 2%No-load power consumption: 0,298W, 2%
This product complies with RoHS 2011/65/EU. The product carries the CE mark
and complies with safety standards established by the European Union. The
declaration of conformity is available on the web pages dedicated to this
product at www.celly.com.
Double insulation
Only for indoor use
Celly® is a trademark owned by CELLY S.p.A.
All brands are registered trademarks of their respective owners.
Esprinet S.p.A., via Energy
Park 20,
20871 Vimercate (MB) – Italy Made in China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>