celly TRAINERBAND Fitness Bracelet Smartwatch User Manual
- June 4, 2024
- celly
Table of Contents
Please read this manual and pay attention to the safety warnings before using
the product
Keep the manual to have the possibility to consult it at a later time, or in
case of passing the product to a third party. Esprinet S.p.A. can not in any
way be held responsible for injury or damage caused to people or things
resulting from improper use of the product. The results of the functions
offered are for reference only, cannot be used to determine the actual
condition of the human body, and cannot be used for medical testing purposes,
not as a judgment on the health of the body. |
System and hardware requirements:
Android 4.4 or later / IOS 8.0 or later
Preparation:
the product must be activated by fully charging it before first use. Press and
hold the right power button. Next, be sure to keep the device sufficiently
charged.
Hook the connector to the body of the product and insert it into the USB port
of a charger to activate it (be careful to insert it correctly and use the
correct current).
Connection:
Verify that your phone meets the above requirements.
Download the APP to connect.
Please search for the “Da Fit” APP in the App Store or Android store to scan
the following QR CODE
https://fitpro.jusonsmart.com/public/fitpro_download.html
Association:
the product must be activated by fully charging it before first use. The
device will start automatically. Next, be sure to keep the device sufficiently
charged.
Hook the connector to the body of the product and insert it into the USB port
of a charger to activate it (be careful to insert it correctly and use the
correct current).
Connection:
Verify that your phone meets the above requirements.
Download the APP to connect.
Please search for the “FitPro” APP in the App Store or Android store or scan
the following QR CODE
Association:
Make sure your smartphone’s wireless functionality is turned on and open the
FitPro app.
Search and select T-BAND and pair the device. Touch the product screen to wake
up the device during the process and complete the pairing.
Usage:
Once the device has connected to the app, it will sync the time. It will
record and analyze your activities, oxygen saturation, heart rate and blood
pressure.
Touch key – One touch of the touch key: switch interface – Press and hold the
touch key: enter Bracelet functions: Time -> Pedometer mode -> Distance
traveled mode -> Calorie mode -> Heart rate mode -> Blood pressure mode ->
Oxygen saturation mode -> Messages
Functions:
-
Time mode: display time, battery, date, heart rate, and steps.
Press and hold the touch key to switch between the available interfaces -
Pedometer: Automatically records the number of steps
-
Distance traveled: Automatically records the distance traveled
-
Calorie mode: displays the calories burned
-
Heart Rate Monitor: The device will automatically measure your heart rate.
You can also manually measure your heart rate via the APP. The page will display the most recent measurement data. -
Blood Pressure Monitor: The device will automatically measure the current blood pressure situation. The page will show the most recent measurement data (the measurement time is about 150 seconds.
-
Oxygen Saturation Monitor: The device will automatically measure blood oxygen saturation levels. You can also manually measure oxygen saturation via the APP.
The page will display the most recent measurement data. -
Sleep Tracking: Automatically recognize your status and track your entire sleep progress with deep sleep analysis and light sleep hours.
-
Call notifications: the bracelet will vibrate when the phone rings.
-
Message notifications: the bracelet will vibrate when the phone receives text messages.
Questions and answers:
-
Can’t find your device while pairing your device?
(1) Make sure the wireless function is turned on.
(2) Make sure the distance between the phone and the device is no more than 0.5m.
(3) Make sure the device is charged. If the problem persists after full charging, please contact us. -
Can’t connect the device with the app?
Restart the wireless functionality or smartphone to pair the device -
Does the APP show no data? Make sure the battery is charged and the wireless function is turned on.
-
Wrong time? If the bracelet has a low battery, the time may be wrong. Please recharge the bracelet and connect the phone again.
If you are wearing a pacemaker or other implanted electronic device, consult
your physician before using the bracelet for the following functions: heart
rate, blood pressure, and oxygen saturation.
The optical sensor of the watch lights up green and flashes. If you have
epilepsy or are sensitive to flashing light sources, consult your doctor if
you can wear this product. The device tracks daily activities via sensors.
This data is intended to track your daily activities, such as steps, sleep,
distance, heart rate, saturation, blood pressure, and calories, but they may
not be completely accurate. The device, accessories, tracking sensors, and
other relevant data are designed for entertainment and fitness purposes, not
for medical purposes. They are not applicable to the diagnosis, monitoring,
treatment, or prevention of disease or symptoms. Heart rate, blood pressure,
and oxygen saturation data are for
reference only. We are not responsible for any consequences caused by any data
deviation.
Cleaning:
Do not use solvents, corrosive or gaseous detergents.
Specifications:
Input: DC 5V / 1A
Charging time: About 2 hours
Battery life: 6 days
Battery type: Lithium polymer, 50mah / 3.7V (0.18Wh)
Software: HS6620
App: FitPro
Frequency: 2.408-2.480GHz
Maximum radiated power: <20mW
Weight: 18.5g
Bracelet size: 24 1.5 1.5cm
Package contents: Fitness tracker, user manual and USB charging cable
CUSTOMER’S INFORMATION FOR THE RIGHT WASTE OF THIS PRODUCT (Directive 2013/56/
The crossed-out bin symbol shown on the equipment or on its packaging
indicates that the product at the end of its useful life, including the non-
removable battery, must be collected separately from other waste to allow for
proper treatment and recycling. The safe use of this product is guaranteed in
compliance with the following instructions, therefore it is necessary to keep
them and follow them scrupulously throughout the life of the product. The
product does not require technical maintenance, NEVER DISASSEMBLE IT. The
battery inside is integrated and not replaceable. Do not attempt to remove the
built-in Lithium Ion / Polymer battery by yourself as it may cause
overheating, fire and injury.
The battery should only be removed by independent qualified professionals who
are able to remove it safely and disposed of it in accordance with applicable
laws. The user must therefore give the equipment at the end of its life free
of charge to the appropriate municipal centers for the separate collection of
electrical and electronic waste, or return it to the retailer, on a one-by-one
basis, or free of charge for appliances with smaller external dimensions. to
25 cm. Adequate separate collection for the subsequent forwarding of the
decommissioned equipment for recycling, treatment, and environmentally
compatible disposal helps to avoid possible negative effects on the
environment and health and favors the reuse and/or recycling of the materials
of which it is composed the equipment. Illegal disposal of equipment,
batteries, and accumulators by the user involves the application of the
penalties provided for by the current legislation.
This product complies with the
RoHS directive 2011/65 / EU
– 2015/863 / EU. The Product has the CE mark and therefore complies with the
safety standards established by the European Union.
Esprinet SpA declares that the product complies with directive 2014/53 / EU.
The full text of the EU declaration of conformity is available at the
following Internet address:
www.celly.com/exchange/CELLY-
SPA/Dichiarazioni_di_conformita/TRAINERBAND/DOC.pdf
Celly® is a trademark owned by CELLY S.p.A.
All brands are registered trademarks of their respective owners.
Esprinet S.p.A., via Energy
Park 20, 20871 Vimercate
(MB) – Italy
Made in China.