celly BHAIR Bluetooth Stereo Earphones User Manual

celly BHAIR Bluetooth Stereo Earphones

Read this user manual and in particular the safety notes, before using the product. Keep the user manual for future reference and include it when passing the product on to third parties. Celly S.p.A. will not in any way be held responsible for injury or damage caused to persons or property arising from misuse of the product.

Safety notes

Avoid listening at extreme volumes, particularly for prolonged periods of time when using the product. If you use the product at an excessively high volume, you could permanently damage your hearing. Listen at a moderate volume. Audio warnings, alerts, and environmental noises may sound different when wearing the product.

• Be aware of how these signals differ in terms of their sound so that you are able to recognize the signals in corresponding situations.
• Do not use the product when driving motor vehicles, cycling, when operating machines or in other situations where impaired awareness of noises in your Surroundings could pose a risk to you or others.
• At the same time, also observe the legal regulations and provisions in the country where you use the product. Lay the cable so that it does not pose a tripping hazard.
• Keep the cable away from sharp edges and hot areas, and avoid it from clamping or crushing.
• To prevent malfunction or damage to the product, avoid accidental falls, and do not crush, puncture, or exercise a high level of pressure on the product.
• Keep the product away from humidity, water or other liquids.
• Do not store or expose your product to any source of heat, direct sunlight, radiators, stoves or other heat sources such as the dashboard of your car in the summer.
• Do not try to modify, or disassemble the product.
• Do not use a damaged product.
• Do not under any circumstances use aggressive cleaning agents, alcohol, or other chemical solutions for cleaning as they can damage the housing or even impair the functionality of the product. Do not immerse the product in water repair or other liquids.
• There are no serviceable parts inside the product. Never open/disassemble it.
• Keep the product out of reach of children.
• Never allow children or persons with disabilities to use electrical products without supervision.
• Make sure that children do not play with plastic wrapping.
• They may swallow it when playing and suffocate.
• Make sure children do not remove any small parts from the product and play with them.

Use Charging

For first time use, charge the battery until it is full. To charge, open the headset’s USB jack and plug the charging cable into the charging port. Red light means it is charging, blue light means the battery has been fully charged.

Turn on
Press and hold the Multifunction button of the headset for about 3 seconds, then the blue light will flash.

**Pairing

**

Place the headset and the pairing device within 1 meter. Press and hold the Multifunction button for 3 seconds until the red and blue light flashes alternately, signaling that it is in pairing mode. your pairing device’s Search Activate Bluetooth “BHAIR”, and select it to connect. feature. for f a password is requested, key in “0000”

• Automatic reconnection
  Once the headset and the pairing device have been paired together, they will automatically be reconnected if they are within a distance of each other and the pairing device’s Bluetooth function is turned on.

• Answer a call
  Press the Multifunction button to take a call.

• Reject a call
  Press and hold the Multifunction button to reject a call.

• Redialing
  Double click the Multifunction button to redial the latest number in your call logs.

• Change track
  Press and hold the + or button to switch the next or previous track.

• Adjusting the volume
  Press the + or – button to adjust the Volume.

• Turning off The Headset
  In ON MODE, press and hold MFB for 2 seconds, the indicator light flashes red for 4 seconds and the headset prompts are sounds, then the headset will enter into OFF MODE.

Multi-point function

1. Connect the Bluetooth headset with smartphone “A”, and then deactivate the Bluetooth function of the smartphone “A”.
2. Connect the Bluetooth headset with smartphone “B”.
3. Activate the Bluetooth function of the smartphone “A” again, then the headset will auto connect to the smartphone “A”. Now the Bluetooth headset is connected to smartphones “A” and “B”.

Cleaning

• If necessary, clean the earphones with a damp cloth and let them dry completely before use.
• Do not use any solvents or corrosive or gaseous cleaning agents.
• Make sure no water or other liquids penetrate the housing.

CUSTOMER’S INFORMATION RIGHT FOR WASTE OF THIS PRODUCT

(2013/56/EU Directive)
This marking on the product or its packaging means that the product at the end of its life, including the battery, the unremovable must be separated from other types of waste to recycle it responsibly. Safe use of this product is guaranteed from respect of this instructions manual, keep it and carefully use it for all life of the product. The product doesn’t need any kind of technical maintenance, NEVER DISASSEMBLE IT. The battery inside the product is integrated and not replaceable. Do not try to remove Li-ion/polymer battery included in inside the product because can produce overheating danger, burning, and injury. The battery must be removed only by qualified professional technicians, that are able to remove it without any kind of danger and to recycle it in the respect of the law. Users should give free end-of-life products into the local separate collection centers or to the retailer, in reason of one to one, or free if the product size is bigger than 25 cm. Adequate waste disposal permits to award the product to recycling, treatment with eco-friendly compatible disposal conduce to prevent possible harm to the environment or human health, and promote the reuse and/or product materials recycling. Unauthorized waste disposal of electronic product, cell, and battery from household user involve currency legislation sanctions.

Technical specifications

• Bluetooth Version: Bluetooth® 4.2
• Standby time: 5 days
• Talk time: 6 hours
• Music time: 5,5 hours
• Earphone charging time: 3 hours
• Battery: 3.7 V/80 mAh (0.296 Wh) lithium-polymer battery
• Input: DC5V – 500mA
• Wireless distance: 10 m
• Software: FCC-P3-690X
• Frequency response: 2,402 2,480 GHz
• Maximum output power: 1,42 mW
• Speaker diameter: 10mm
• Operation temperature: 00-40°C
• Weight: 19g

CE:
This product complies with RoHS 2011/65/EU. The product carries the CE mark and complies with safety standards established by the European Union. Hereby, Celly SpA declares that the product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

Celly is a trademark owned by CELLY S.p.A.
All brands are registered trademarks of their respective owners. Imported by CELLY S.p.A., via Energy Park 22, 20871 Vimercate (MB)- Italy
Made in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>