BackBeat FIT 3100 User Manual
- June 8, 2024
- Plantronics
Table of Contents
BackBeat FIT 3100 Series
User Guide
Controls overview
NOTE *Functionality varies by application. May not function with web- based apps.
Power, pair and charge
Power on the case
Your charge case is shipped from the factory in a Deepsleep mode to conserve
battery. Power on your charge case to power your earbuds for first use.
Click and hold the charge case button for two seconds to power it on.
The charge case LEDs light up.
Pair first time
The first time you take your earbuds out of the charge case, the pairing process begins.
-
1. 1. 1. Take the earbuds out of the case. The LED, located on the right earbud, flashes red and white to indicate pairing mode.
2 Activate Bluetooth® on your phone and set it to search for new
devices.
• iPhone Settings > Bluetooth > On
• Android ™ Settings > Bluetooth: On > Scan for devices
NOTE * Menus may vary by device.
3 Select “PLT BBFIT3100 Series.”
Once successfully paired, you hear “pairing successful” and the earbud LED
stops flashing.
Pair mode
With the headset powered off, click and hold the right earbud until you hear “pairing.”
Charge
To charge your earbuds, place them in the charging case. Charge the case by plugging it into a computer or USB charging device. For the fastest charging, plug them into a wall charger.
NOTE If the charge case has no charge, first charge the case separately, then charge the earbuds.
LEDs on earbuds/case
Earbuds charging – On
Case charging – Flashing
Earbuds fully charged – Off
Case fully charged – Off
Install the app
Get the most from your earbuds by downloading our free app, BackBeat for
iOS/Android.
With this app, you can:
• Stream a playlist, use a stopwatch, customize volume settings and more on
your earbuds (My Tap)
• Change earbud language
• Turn settings on/off
• Switch earbud controls from the right earbud to the left earbud
• Find MyHeadset
• View the user guide
The Basics
Power on/off your earbuds
You can automatically or manually power on/off the earbuds.
• Automatic Taking the earbuds out of the case, automatically powers your
earbuds on. Conversely, putting them back in the case automatically powers
them off and starts charging them.
• Manual Click and hold the earbud button for 2 seconds to manually power it
on. To manually power them off, click and hold for four seconds.
NOTE Turning off the right earbud, turns off the left earbud. To power
on, power the earbuds on individually.
Power transfer
If your right earbud loses power, all functions and audio transfers to the
left earbud.
Adjust the volume
The left earbud has a touch sensor button. Only a light touch is required.
1 To increase volume, tap the left earbud.
2 To decrease volume, touch and hold the left earbud.
Play or pause audio
Click the right earbud.
NOTE Functionality varies by application.
Track selection
Double-click the right earbud to skip to the next track or triple-click the
right earbud to play the previous track.
NOTE Functionality varies by application. May not function with web-based
apps.
Make/Take/End Calls
Answer or end a call
Click the right earbud.
Answer a second call
First, click the right earbud to end current call, then click the right earbud
again to answer new call.
Use Siri, Google Now
Your earbuds support Virtual Personal Assistants (VPA) such as Siri and Google Now. Click and hold the right earbud for two seconds to use your device’s VPA.
DeepSleep mode
If you leave your earbuds powered on but out of range of your paired device,
they conserve power by entering DeepSleep mode after 120 minutes and power off
mode after 7 days.
To exit DeepSleep mode, choose:
• After 120 minutes , power on each earbud.
• After 7 days, reset by powering off and on.
Switch controls for better audio
For best Bluetooth performance, keep your phone/audio device on the same side of your body as the primary earbud.
Your right earbud is the primary earbud by default. It pairs to your phone/audio device and the left earbud automatically connects to the right.
If your prefer having your phone/audio device on the left side of your body, use the Switch Primary Earbud feature in the BackBeat app to make the left earbud the primary earbud. This moves the Bluetooth connection as well as primary controls to the left earbud and move the volume and My Tap controls to the right earbud.
Support
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
Plantronics B.V.
Scorpius 171
2132 LR Hoofddorp
Netherlands
©2018 Plantronics, Inc. BackBeat and Plantronics are trademarks of
Plantronics, Inc. registered in the US and other countries, and Plantronics
Hub is a trademark of Plantronics, Inc. Bluetooth is a registered trademark of
Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All
other trademarks are the property of their respective owners.
Patents pending.
213298-06 (08.18)
BackBeat FIT 3100 User Manual – Optimized PDF
BackBeat FIT 3100 User Manual – Original PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>