plantronics Voyager Legend Mobile Bluetooth Headset User Guide
- October 25, 2023
- Plantronics
Table of Contents
plantronics Voyager Legend Mobile Bluetooth Headset User Guide
What’s in the Box
Accessories
- Portable charge case
- Desktop charge stand
- AC charger
- USB charge cable
- Car charge adapter
- Micro USB charge adapter
- Ear tip kit (available in S, M, L)
Headset Overview
- Call button
- Volume button
- Headset LED (indicator light)
- Power button
- Magnetic charge port
- Magnetic charge port
- Magnetic charge port
- Play/Pause button
Pairing
Get Paired
The first time you power on your headset, it begins the pairing process.
- Wearing your headset, power it on. You hear “pairing” and the headset indicator lights flash red and blue.
- Activate Bluetooth® on your phone and set it to search for new devices.
- iPhone® Settings > Bluetooth > On*
- Android™ > Bluetooth: On > Scan for devices NOTE Menus may vary by device.
- Select “PLT_ Legend.”
If necessary, enter four zeros (0000) for the passcode or accept the
connection. Once successfully paired, you hear “pairing successful” and the
headset indicator lights stop flashing.
NOTE To enable caller name announcement, allow access to your contacts if
your phone prompts you. After pairing your headset to your phone you may want
to pair another or new phone.
Pair another phone
- Switch on your headset then choose:
- Tap the Voice button and say “Pair mode,” or
- Press and hold the Call button
- While the headset LEDs are flashing red and blue, activate Bluetooth® on your phone and set it to search for new devices.
- Select “PLT_ Legend.” If your phone asks, enter four zeros (0000) for the passcode or accept the connection.
- Once successfully paired, LEDs stop flashing red and blue and you hear “pairing successful.”
NOTE To enable caller name announcement, allow access to your contacts if your phone prompts you.
Charge
Your new headset has enough power to pair and make a few calls before charging is needed, though you may charge at any time.
- Align snap-fit magnetic areas of headset and USB cable.
- Attach cable to USB wall charger or laptop for 90 minutes. LEDs turn off once fully charged.
Table 1: Headset LED behavior while charging
- Off Charging complete
- Battery high
- Battery high
- Battery low
- Battery critical
Fit
Change the ear tip
Change the ear tip for a better fit.
- Push in ear tip and rotate to the left to unlock it.
- Align new ear tip into slot.
- Rotate it to the right to lock it into place.
Wear on the left or right
To wear the headset on your other ear, rotate the boom upwards then twist it around so the eartip is on the other side before lowering the boom.
The Basics
Make/Take/End Calls
Answer a call Choose:
- Put on the headset to answer call, or
- Say “answer” after call is announced, or
- Tap the Call button Answer a second call First, tap the Call button call. to end current call, then tap the Call button again to answer new
End a call
Tap the Call button to end current call.
Reject a call
Choose:
- Take off the headset , or
- Say “ignore” after call is announced, or
- Press Call button for 2 seconds
Call back last call
Double-tap the Call button .
Voice dial (phone feature)
If your smartphone has a voice-enabled assistant, press the call button for 2
seconds and wait for phone prompt.
Caller Announcement
When wearing your headset, you will hear the name of a contact calling you so
you can decide whether to answer or ignore the call. An incoming caller name
is announced:
- if your phone has the Phone Book Access Profile (PBAP)
- if you granted access to your contacts during pairing process
- if they are a stored contact However, in the following situations, an incoming caller name is not announced:
- if you use the sensors to automatically answer a call while putting on your headset
- if the caller is unknown, unlisted, or blocked
- if your phone doesn’t support PBAP
NOTE Cantonese, Danish, Japanese, Korean, Russian and Swedish do not have native language caller announcement support.
Mute
During a call, you can mute the microphone.
Tap the Mute button. You will hear “mute on” confirmation. An alert repeats
every 15 minutes to remind you of microphone mute. Tap the Mute button again
to open the microphone and hear “mute off” confirmation.
Adjust the volume Use sensors
Toggle the Volume button up (+) or down (–) during a call or while
streaming audio.
Smart Sensors™ technology in this headset recognizes if the headset is being
worn and can automatically perform time-saving functions.
Putting on your headset will:
- Answer an incoming call
- Transfer an active call from your phone
- Resume streaming audio
Taking off your headset will:
- Reject an incoming call
- Transfer an active call to your phone handset
- Pause streaming audio
- Lock the Call button to avoid accidental calls
Reset Sensors
You may need to reset the sensors if they are not working as expected.
- Test Wearing the headset, tap the Call button to test sensors. A talk time voice alert means sensors are working. A tone means sensors need to be reset .
- Reset To reset the sensors, charge your headset and place on a flat non-metallic surface for more than 10 seconds.
Play or pause streaming audio
A 2-second press of the Play/Pause button will either pause or resume playback
of streaming audio.
NOTE You must pause your streaming audio before you:
- streaming audio.
NOTE You must pause your streaming audio before you:
More Features
Voice alerts
Your headset understands and speaks in English. You can change the language
online by visiting www.plantronics.com/myheadset and downloading the
MyHeadset™ Updater tool. The available languages for voice alerts are
Cantonese, English (UK and US), Danish, French, German, Italian, Japanese,
Korean, Mandarin, Norwegian, Russian, Spanish and Swedish.
Voice alerts list
- “Power on/off”
- “Answering call”
- “Talk-time (x) hours”
- “Battery low”
- “Recharge headset”
- “Lost connection”
- “PC connected”/”PC disconnected”
- “Phone 1 connected/Phone 2 connected”
- “Pairing”
- “Pairing successful”
- “Pairing incomplete, restart headset”
- “Mute on/off”
- “Volume maximum/minimum”
- “Voice recognition on/off”
- “Calling back last number”
- “You can say”
Adjust voice alert volume
Toggle the volume button when the headset is powered on and idle (not on a
call or streaming music) to adjust the volume of the headset’s voice alerts.
Voice commands
Tap the Voice button , wait for command request, then say a command. For
example, “What can I say?” tells you the full list of available commands. You
can change the voice command language by visiting
www.plantronics.com/myheadset and downloading the My Headset™ Updater tool.
The available languages are English (US and UK), French, German, Italian,
Japanese, Korean, Mandarin, Russian, Spanish and Swedish. Voice commands for
Cantonese, Danish and Norwegian must be spoken in English.
Voice commands list
- “Am I connected?”
- “Answer”
- “Cancel”
- “Check battery”
- “Ignore”
- “Pair mode”
- “Call back”
- “What can I say”
NOTE The voice-dial feature on your phone is initiated by pressing the Call button The voice-dial feature is not a headset voice command.
Disable the answer/ignore voice commands
To disable the “answer/ignore” voice commands:
- Switch on the headset.
- Press and hold the Voice button until you hear a double tone.
- Repeat to reactivate the voice answer commands.
Customize your headset
Your headset understands and speaks in English. You can change the language
and other settings using a USB cable, PC and Plantronics tool.
The My Headset™ Updater (www.plantronics.com/myheadset) tool enables you to:
- Receive firmware updates
- Change language for voice alerts and commands
- Turn voice commands on/off
- Turn Smart Sensors ™on/off
- Turn high quality audio (A2DP) streaming on/off
- Turn “mute off” voice alert on/off
- Turn Wideband Audio for HD Voice on/off
- Connect your headset and USB cable to your computer.
- Download the My Headset™ Updater tool by visiting www.plantronics.com/myheadset.
- Edit language, regional settings, configure other features, and download updates when available.
Multipoint
Voyager Legend supports multipoint technology, which allows you to use one
headset with two different Bluetooth mobile phones. To pair your headset to a
second phone, see “Pair another phone”.
To answer a second call on the other phone, the current call must be
terminated or transferred back to the first phone. If you choose not to
answer, the second call will go to voice mail.
- Tap the Call button to end the first call.
- Tap the Call button again to answer the second call
NOTE To avoid issues with multipoint, use the Call button on the headset rather than your phone controls.
Specifications
- Talk Time Up to 7 hours
- Standby Time Up to 11 days
- Operating Distance (Range) Up to 33 feet (10 meters), Class II
- Headset Weight Headset Weight
- Charge Connector Micro USB cable with magnetic snap-fit connection to headset, modular AC wall charger 100-240v
- Battery Type Rechargeable non-replaceable lithium ion polymer
- Charge Time (Maximum) 90 minutes for full
- Power Requirements 5V DC – 180mA
- 5V DC – 180mA Bluetooth v3.0
- Bluetooth Profiles Supports Advanced Audio Distribution (A2DP), Audio/Video Remote Control (AVRCP),Wideband Hands-free v1.6 (HFP), Headset v1.2 (HSP), Phone Book Access Profile (PBAP), Secure Simple Pairing (SSP2)
- Noise and Wind Canceling Triple-mic active Digital Signal Processing (DSP) plus:
- Internal, adaptive 20-band equalizer
- Acoustic echo cancellation
- Side tone detection for noise conditions Triple-barrier wind noise protection includes:
- Stainless steel windscreens
- Acoustic fabric mesh
- Electronic filter in microphone circuitry
- Operating Temperature 32°F – 104°F (0 – 40°C)
- Storage Temperature 32°F – 104°F (0 – 40°C)
- Charging Temperature 32°F – 104°F (0 – 40°C)