Plantronics Voyager-855 Bluetooth Headset-User Guide
- June 4, 2024
- Plantronics
Table of Contents
Plantronics Voyager-855 Bluetooth Headset
Specification
- Brand Poly (Plantronics + Polycom)
- Color Black
- Form Factor In-Ear
- Connectivity Technology Bluetooth Wireless
- Communication Technology Bluetooth
- Weight 0.529 ounces
- Dimensions 8.38 x 2.25 x 5.5 inches
- Frequency 2.4 GHz
- Range 33 feet (10 meters)
What’s In the Box
- Bluetooth Headset
Product Description
Tune out the world, tune in full-spectrum stereo music, and conveniently switch to calls on your music-enabled phone. Sound-isolating stereo earbuds seal out noise and seal in sound for better listening while AudioIQ two-way noise reduction technology digitally enhances sound to improve call quality on both sides of the call. Conveniently answer and end calls by extending and retracting the sliding boom. One-touch buttons let you control calls and music from your headset. At only 15 grams, it’s lightweight, comfortable, and discreet. On the train, on the road, or on the move, the Plantronics Voyager 855 Bluetooth headset is the perfect convertible for traveling life’s highway.
How to Pair
- On your iPhone, press Settings > General > Bluetooth.
- If Bluetooth is turned Off, tap to turn it On. …
- Place your Bluetooth headset into pairing mode.
- When you see your Plantronics device name, tap it to pair and connect.
Care and Maintenance
- Unplug all cables from the device.
- Spray medicinal isopropyl alcohol and water solution of 70:30 onto a clean, dry, microfiber cloth, making sure to not oversaturate the cloth.
- Gently wipe the fabric and surrounding areas.
- Let the fabric and surrounding areas air-dry completely before reconnecting any cables.
Safety Instructions
- Wipe after every use.
- Do not let others use your earphones.
- Lightly brush earwax or debris off the driver unit.
- Don’t forget the jack.
- Don’t put them directly in your pocket.
- Don’t dangle the wires.
- Keep your wires untangled.
- Don’t roll your cables in tight loops.
Features
- Detachable cable lets you easily convert mono headset for stereo listening on your music-enabled Bluetooth phone
- Sound-isolating earbuds block out distracting background noise so that you can focus on music or conversation
- Plantronics AudioIQ two-way noise reduction technology¿now every word can be clearly heard, regardless of the surrounding noise
- Seamlessly switch between calls and music with the same headset. Tune out the world, tune in your music and stay in touch
- 2-in-1 headset with one-touch call and music controls. Adjust volume, mute the microphone, track forward and back, pause, and then play on
Note Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
Legal Disclaimer
The warranty does not cover misuse of the product.
Warranty & Support
If you’d like a copy of the manufacturer’s warranty for a product found on Amazon.com, you can contact the manufacturer directly or visit their website for more information. Manufacturer’s warranties may not apply in all cases, depending on factors like the use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.
FAQs
Why is my Plantronics Bluetooth not connecting?
Remove the phone’s battery if at all possible. Restart the phone’s battery. Reconnect the headset to your phone. Try pairing the headset with a different cell phone if the problem persists.
How do I use my poly Plantronics headset?
Bluetooth on your device should be enabled. Switch on the headset. The headset’s light should begin to alternately flash red and blue. Go to the Bluetooth menu on your smartphone and look for (or add) a device. Enter 0000 when prompted for a passkey (four zeros).
How do I use my Plantronics Bluetooth headset?
Start by turning OFF your headset, then press and hold the call control/power button until you see a red and blue LED flash. The Plantronics Bluetooth headset will be listed as “PLT” followed by the model name when you turn on Bluetooth on your phone and search for new devices.
How do you answer your phone with a poly headset?
The call control button should be momentarily pressed to accept or reject a call. There is no need to push the call control button while placing a call; simply input the desired number on your phone, hit submit, and the call will be immediately transferred to your headset.
How do I pick up calls on my Plantronics headset?
When you hear an incoming call, you can either: Press the headset call button. Select the ringing line by pressing the button on the base. You must manually remove the desk phone handset before each call if you don’t have remote call control via a lifter (HL10) or cable (EHS).
How do I check the battery level on my Plantronics headset?
When you turn on the headset and at the conclusion of each call, you’ll hear how much speak time is left. In between calls, check the battery’s charge: Choose Voice Recognition from the menu. Say “Check battery” after the voice prompt “Say a command.”
Where is call button on Plantronics Bluetooth?
Your call control is the black button on the rear of the microphone boom arm. You can use this button to answer or end calls when your phone rings because your headset will beep. The Plantronics Bluetooth pairing feature is also activated by pressing the same button.
Can you answer the phone with Plantronics headset?
Press the on button on your Plantronics headset after removing it from the charging base. Your business phone will have a headset button on the face. To answer or end your phone calls, use the headset button.
How do you answer a team call with Plantronics headset?
You’ll visit the Calls screen in Teams to see if there are any missed calls or brand-new voicemails. Hit the Answer/End call button to respond. Hold down the Answer/End call button on your headset for a few seconds. To open the Teams window, click the Microsoft Teams button.
Can you transfer calls with a headset?
Please be aware that calling from a headset cannot be transferred. You must utilise the buttons on the phone handset to do operations like phone transfers and call holding; as a result, you must return to your desk to complete these tasks.
How do I adjust my Plantronics headset?
Lengthen or shorten the band to make the headband fit more comfortably. Place the headset so that the foam ear cushion is over your ear in a comfortable position. Gently pull the opposite end of the headset inward as shown for a tighter fit.
How do I turn on my Plantronics wireless headset?
Press and hold the call control button to turn on the headset until the headset status indicator becomes blue. When the power comes on, you will hear a beep if you are wearing the headset. When the headset is powered on, the status indicator will flash blue every 6 seconds.
Why is my Plantronics headset blinking?
Slow blinking signifies that the headset is on and ready for usage. Rapid blinking – There is absolutely no connection between the headset and the base station. Every time the base station loses power, this will happen. Please reset the headset using the instructions in the link above if it occurs when the base station is powered.
How do I know when my poly headset is fully charged?
These headsets are easily charged by sliding them into the charging base while making sure the amber light (located on the base’s left side) starts flashing. The headset is fully charged when the amber light turns solid.
How do I put my Plantronics into pairing mode?
Hold down the Call button while listening for “pairing.” Set Bluetooth on your phone to search for new devices when the headset LEDs are flashing blue and red. When a pair is completed successfully, indicator lights turn off and the phrase “pairing successful” is audible.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>