Umidigi Upods TWS Wireless Earbuds User Manual

User Manual

Product introduction

Earbuds

Warm Tips:
These earbuds are equipped with a medium ear cap. We are recommended
to replace the large or small ear cap If you feel unwell.

Wear Earbuds
Gently insert the earbuds tilt down into the ear canal, ensure that the
headphone does not shake when you gently shake your head.

Charging
Before starting to use, please tear off the isolation film at the charging touch
point of the earbuds, and charge the charging case and earbuds fully.
Plug in the charging cable can charge both the earbuds and the charging case
at the same time.
When the charging case is not fully charged, the top one of the indicators will
flash, and the four charging indicator will keep light up when fully charged.
During the charging of the earbuds, the red charging indicator will keep light up.
When the earbuds are fully charged, and the white indicator of the earbuds will
light up 1 minute and then goes out.

Turn on
If the earbuds are in the charging case, will be automatically booted when it is
removed from the charging case.
If the earbuds are not in the charging case and are shut down, press and hold
the multi-function button for about 2S (white indicator flashes)

Turn off
Put earbuds into the charging case, the earbuds will automatically shut down.
In the power-on state, long press the multi-function button for about 5S (red
indicator will long bright 2S)
Long press about 5S
Red light long bright 2S

Use the earbuds
Automatic connection: Take earbuds out of the charging case at the same time.
Wait for the 2-3S earbuds to automatically boot. When the white indicator of the
left and right earbuds flashes slowly, open the device Wireless search “Upods”
and connect.
If the connection fails, put the earbuds back in the charging case and repeat
the above operation.
After the first connection, the earbuds when automatically connect to the last
paired device when turned on(Wireless on).
Single ear is used in the same way as both ears

Note: The earbuds have been initialized when produced and can be taken out
directed for related operations.
Earbuds Indicator

Earbuds reset

If the headset cannot be connected properly, please reset the headset as
follows: Take the headset out of the charging box, and then turn off the two
headset multi-function keys for 10 seconds, respectively, and release and put it
when the red and white lights are on. Return to the charging box, delete the
connection record on the device, re-automatically pair and connect the device.

Function
The following functions can be operated on both left and right ears

1. Answer/hang up the phone
   Press the multi-function button to answer/hand up the call;

2. Reject the call
   When calling, long press the multi-function button for about 1 second to reject the call.
   Long press about 1 second

3. Play/pause music
   In standby mode, short press the multi-function button to pause/play music.
   Note: The music player background needs to be running.

4. Turn on the voice assistant
   In standby or music playback mode, press the multi-function button twice to turn on the voice assistant (if you need to turn off the voice assistant, you can press the multi-function button again).
   Note: The device needs to support voice and turn on the fast wake-up setting.

5. Answer the second call and switch the call
   When the mobile phone calls, short press the multi-function button to answer
   the call; when there is a new phone call, short press the multi-function button to
   hold the current call and answer the second call; Long press the multi- function button to switch two calls.

Note:

1. If the product has not been used for more than two weeks, it is recommended
   to charge the product ;

2. It is necessary to select a charger that has been produced by a regular
   manufacturer and has passed the certification of the local state;

3. Continuous use of headphones for a long time is detrimental to hearing
   health, please control the use time and volume reasonably;

4. Using headphones will reduce the perception of external sounds, please do
   not use headphones in environments that may threaten safety

Warranty

1. The warranty period is 1 year since the acquisition date.
2. During the warranty period, if there are any problems or malfunction about
   this product in the case of normal use and maintenance, after verification, we will provide free repair and component replacement.

Product Specification

Product name: Upods TWS Wireless
Earbuds
Model: Upods
Upods Basic Parameters
Product size: 26.515.321.5mm
Single Upods weight:4g
Communication distance:10m
Battery capacity:43mAh（
Charging time: About 1.5h
Music playtime: About 4h
Standby time:200h
Input parameters:5V—100Ma
Battery type: Lithium ion polymer battery
Wireless connection：5.0
Wireless protocol: HFP/A2DP/HSP/ AVRCP

Charging case parameters:
Product size:684131mm
Input parameters:5V—500Ma
Output parameters:5V—150Ma
Charging time:2h
Standby time: About 2 months
Battery capacity:600mAh
Battery type: Lithium ion polymer
battery
Charging case parameters:
Product size:684131mm
Input parameters:5V—500Ma
Output parameters:5V—150Ma
Charging time:2h
Standby time: About 2 months
Battery capacity:600mAh
Battery type: Lithium ion polymer
battery

Read More About This Manual & Download PDF:

Umidigi Upods TWS Wireless Earbuds User Manual – Optimized PDF
Umidigi Upods TWS Wireless Earbuds User Manual – Original PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>