Tzumi SoundMates Bluetooth 5.0 TWS Earbuds User Manual
- June 8, 2024
- Tzumi
Table of Contents
User Manual
Tzumi SoundMates Bluetooth 5.0 TWS Earbuds
WHAT IS INCLUDED
- 1x Charging Box
- 2x Earbud ( Left and Right)
- 1x Charging Cable
- 1x Instruction Manual
BLUETOOTH PARING INSTRUCTION
FIRST – Remove both earbuds from the charging case. They will begin auto- pairing to each other, You will hear 2 beeps to confirm a successful pairing.
SECOND – Keep the earbuds within 10 meters of your smart device (for
Bluetooth pairing only). Enable your device’s Bluetooth function from your
device’s Settings menu. Select
“Tzumi Soundmates” from the Bluetooth device list to pair the earbuds to your
device.
THIRD – You will hear “Device Connected.” Your Soundmates are now ready to use!
RESETTING YOUR EARBUDS
If your Soundmates won’t pair to each other, place them back in the charging case. When you remove them from the case again, they will auto-pair.
SOUNDMATES FUNCTIONS
- Power ON: Remove your earbuds from the charging case.
- Power OFF: Place your earbuds back into the charging case.
Reset Master Earbud: Press and hold the multifunction button on both earbuds until the LEDs flash RED and BLUE alternately. Choose an earbud to designate as the master and press twice. That earbud’s LED will flash and the other LED will remain steady on.
MUSIC / CALLING
- NEXT/PREVIOUS SONG – While music is playing, tap the LEFT earbud’s LED 3 times to skip to the previous song. Tap the RIGHT earbud’s LED 3 times to skip ahead to the next song.
- PLAY/PAUSE – Tap the RIGHT earbud’s LED twice to play or pause your music.
- ANSWER/END INCOMING CALL – Tap the RIGHT or LEFT earbud LED twice to answer an incoming call. Tap the RIGHT or LEFT earbud LED twice again to end the call.
ACTIVATE VOICE ASSISTANT
Tap the LEFT earbud’s LED twice. You will hear a beeping sound to indicate that your Voice Assistant/Siri is “awake” and awaiting your commands.
CHARGING YOUR SOUNDMATES
NOTE: Be sure to fully charge your Soundmates before using for the first time.
CHARGING THE CASE – Plug the standard Micro-USB charging cable into the port on the case and connect the USB head to a power source, such as an AC wall adapter or computer. The case’s LED indicators will remain solid GREEN while charging. When the LEDs stop flashing and turn off completely, the case is fully charged.
CHARGING THE EARBUDS – Place the earbuds into their respective slots in the charging case. The earbuds’ LED indicators will turn RED while charging. When the earbuds are fully charged, both LEDs will turn off.
SPECIFICATIONS
- Bluetooth Technology: Version 5.0
- Battery (Earbuds): 45 mAh ( x2); 3.7V
- Battery (Charging Case): 500 mAh; 3.7V
- Power Output: 6mW
- Earbuds Charging Time (Est): 1 hr
- Charging Case Time (Est): 2 hr
- Music Playback Time: Approx. 3 hours at max. volume
- Talking Time: Approx. 3 hours
- Frequency: 20 – 20KHz
- Dimensions in Case: 51.5 x 44 x 21 mm (2.0 x 1.7 x 0.58 in.)
SoundMates Distributed by tzumi® Inc. NY, NY, 10016. ©Copyright 2018 tzumi Inc. All Rights Reserved. Made In China. All other trademarks and tradenames are the property of their respectful owners. Subject to change without prior notice.
FCC ID: XXXXXXX
Read More About This Manual & Download PDF:
Tzumi SoundMates Bluetooth 5.0 TWS Earbuds User Manual – Download
[optimized]
Tzumi SoundMates Bluetooth 5.0 TWS Earbuds User Manual –
Download
Questions about your Manual? Post in the comments!