VIVO Dual Monitor Desk Stand Instruction Manual
- June 7, 2024
- Vivo
Table of Contents
VIVO Dual Monitor Desk Stand Instruction Manual
SKU: STAND-V002F
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/stand-v002f
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT
TIPOVER:
-
TO PREVENT TIPPING, PLEASE BE CAREFUL NOT TO EXTEND THE ARMS TOO FAR FORWARD
OR BACKWARD. -
NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND. -
USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING : CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
NOTE : SOME HARDWARE INCLUDED MAY NOT BE USED
TOOLS NEEDED
Phillips Screwdriver
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
22 lbs (10kg) PER ARM
ASSEMBLY STEPS
STEP 1
Install the pole (A) to the base (B) using M5x14 Screw (S-A). Tighten with the
3mm Allen wrench (T-A).
STEP 2
Slide Wire Clip (F) and Swivel Arm (C) down onto the Pole (A) and tighten
the screw with 6mm Allen Wrench (T-C). Attach the Pole Cap (E) to the top of
the Pole (A). Attach the Wire Clips (G) to the Arms.
STEP 3
OPTION A: Flat Back Monitor
Attach the VESA plates (D) to the monitors using M4x12 Thumbscrew (S-B).
NOTE : Hand tighten screws to avoid stripping the plastic screw heads.
OPTION B: Curved Back Monitor Attach the VESA plates (D) to the monitors using M4 Spacers (S-E) and M4x30 Screws (S-D). Tighten with a Phillips screwdriver.
STEP 4
Slide the monitors onto the heads of swivel arm and install the Security Nuts
(S-C). Make sure the security nuts are installed before you rotate the
monitors.
STEP 5
Tighten the bolt on the side of the tilt joint with the 5mm Allen Wrench (T-B)
to fix the tilt angle.
To level the monitors, remove the security nut and turn the bolt with the 3mm Allen Wrench (T-A) to raise or lower the monitor. Replace nut after the adjustment.
STEP 6
Use the 5mm Allen Wrench (T-B) to adjust swivel joints if needed. Manage
cables and store the Allen Wrenches (T-A, T-B, T-C) in Wire Clip (F) for
future use.
STEP 7
CAUTION : To prevent tipping, please be careful not to extend the arms
too far forward or backward.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 02/24/2021 REV1.0
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1 HR 8 M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5 M 4 S
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo- us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- STAND-V002F Dual Monitor Desk Stand – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>