WatchGuard AP130 WiFi Access Point Cloud Managed User Guide
- June 6, 2024
- Watchguard
Table of Contents
WatchGuard® AP
Quick Start Guide
AP130
ACTIVATE YOUR AP
GO TO: watchguard.com/activate
Activate Products
Enter Serial Number or License Key
- To activate a new device, type the serial number exactly as it appears (include any hyphens). You can find the serial number on a label on your device or on the fulfillment email for your virtual device.
- To activate an add-on license, service, or renewal, type the license key from your fulfillment email or online store receipt.
MOUNT THE AP
CEILING MOUNT
WALL MOUNT
Use the included spacers if you mount to a wall with the 15/16″ bracket attached to the access point.
CONNECT THE AP
Plug one end of the Ethernet cable from your network into the LAN PoE port on the bottom panel of the AP. Make sure the other end of the Ethernet cable is connected to your network through a hub, switch, or injector with PoE (802.3af/at) power enabled.
FRONT PANEL
BACK PANEL
POWER REQUIREMENTS
- PoE 802.3af/at (48V DC, 0.6A)
- Optional DC power adapter (12V, 2A)
Power Options
WG8602 (AU), WG8601 (UK), WG8600 (EU), WG8599 (US)| WatchGuard 802.3at PoE+
Injector with AC cord
WG9009| 12V Power Adapter for WatchGuard AP130
CONFIGURE AND TROUBLESHOOT THE AP
GO TO: watchguard.com/start
http://www.watchguard.com/start
NOTICES:
All WatchGuard products are designed and tested to meet strict safety
requirements. These requirements include product safety approvals and other
global compliance standards. Please read these instructions carefully before
operating the product, and refer to them as needed to ensure the continued
safe operation of your product.
Additional information, including a full list of safety approvals, global
compliance standards, and certifications can be found in the Hardware Guide
for this device located on the WatchGuard website:
https://www.watchguard.com/wgrd-help/documentation/hardware-guides
For patent information, please visit http://www.watchguard.com/patents
Safety Warning
If protective earthing is used as a safeguard, the instructions shall require
the connection of the equipment protective earthing conductor to the
installation protective earthing conductor (for example, by means of a power
cord connected to a socket-outlet with earthing connection). To meet safety
and electromagnetic interference (EMI) requirements, you must make sure the
power source is connected to earth ground before you connect power to the AP.
Power Adapter Requirements
This product is intended to be supplied by a Listed Power Adapter or DC power
source marked “L.P.S.” (or Limited Power Source or PS2) rated 12V DC, 2A
minimum, maximum ambient temperature (Tma)=40°C, or supplied by a Listed PoE
Adapter marked “L.P.S.” (or Limited Power Source or PS2) rated 48V DC, 0.6A
minimum, maximum ambient temperature (Tma)=40°C. For more information
regarding approved power sources, please contact WatchGuard Technologies.
This product is for indoor use only.
Declaration of Conformity
WatchGuard Technologies Inc. hereby declares that the product(s) listed below
conform to the European Union directives and standards identified in this
declaration.
Product (s):
802.11 a/b/g/n/ac Access Point, AP130
EU Directive(s):
Low Voltage (2014/35/EU)
Electromagnetic Compatibility (2014/30/EU)
Energy-related Products (2009/125/EC)
RoHS (2011/65/EU and 2015/863/EU RoHS)WEEE Directive 2012/19/EU
The Radio Equipment Directive (2014/53/EU)
Common Standard(s):
EN 62368-1:2014+A11:2017
EN 55024:2010
EN 55024: 2010+A1:2015
EN 55032:2015/AC:2016
EN 55035: 2017
EN 61000-3-2:2014
EN 61000-3-3:2013| Safety for ITE
Immunity for ITE
Harmonics
Flicker
---|---
Wireless Standard(s):
EN 62311:2008
EN 301 489-1 v2.2.3 (2019-11)
EN 301 489-17 v3.1.1 (2017-02)
EN 300 328 v2.2.2 (2019-07)
EN 301 893 v2.1.1 (2017-05) EN 50385: 2017| EMC and Radio Spectrum Matters
EMC and Radio Spectrum Matters
Radio Spectrum Matters
Broadband Radio Access Networks
---|---
This device complies with Directive 2014/53/EU issued by the Commission of the European Community.
Manufacturer / Hersteller:
Equipment / Funkanlage:
Type Designation / Typenbezeichnung:
Specifications / Technische Daten:
Intended Purpose / Verwendungszweck:
Equipment Class / Betriebsmittel der Klasse:
Operating temperature| WatchGuard Technologies
505 5thAve S. Suite 500, Seattle, WA 98104 USA Radio
802.11 a/b/g/n/ac Access Point
AP130
802.11a,b,g,n,ac (2.4Ghz & 5GHz)
Indoor access point
Class II
0° C to 40° C
---|---
The above device complies with the essential requirements and other relevant
provisions to Directive 2014/53/EU when used for its intended purpose. This
equipment may be operated in the USA, Canada, & Europe Union.
Warning! This is a Class B product. In a domestic environment, this product
may cause radio interference in which case the use
may be required to take adequate measures.
| Frequency range (MHz) | Max. Transmit Power (W) |
|---|---|
| WLAN Wi-Fi 802.11x; 2, 4 GHz | 0.09418 |
| WLAN Wi-Fi 802.11x; 5 GHz | 0.86896 |
Signature
WATCHGUARD TECHNICAL SUPPORT
1.877.232.3531 (U.S. and Canada)
+1.206.613.0456 (all other countries)
www.watchguard.com/support
ADDRESS: 505 Fifth Avenue South, Suite 500, Seattle, WA 98104
U.S. SALES: 1.800.734.9905
INTERNATIONAL SALES: +1.206.613.0895
WEB: www.watchguard.com
© 2022 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Fireware, and LiveSecurity are registered trademarks of WatchGuard Technologies, Inc. in the United States and/or other countries. All other trademarks and tradenames are the property of their respective owners. P.N. 352-4130-001 Rev B 011222