Knoll KNL21 Antenna Digital Control Switch User Guide
- June 6, 2024
- Knoll
Table of Contents
Knoll KNL21 Antenna Digital Control Switch
For Use with Tone and Antenna Telescope
The Antenna Digital Control Switch is designed for use with Tone Height-
Adjustable Tables and Antenna Telescope. The switch features basic up and down
buttons; programmable quick sit and quick stand buttons; and three additional
programmable height settings.
This document will guide users through basic set up and programming the most
commonly-used functions of this Switch. For more detailed instructions, or for
the full Antenna Digital Control Switch User Guide, visit the Tone or
Telescope product pages at www.knoll.com.
Program a Quick Sit Height
- Move the table to seated height.
- Press and hold for 3 seconds.
- Immediately press Quick sit is programmed.
- To travel to the Quick Sit Height, press and hold .
Program Quick Stand Height
- Move the table to standing height.
- Press and hold for 3 seconds.
- Immediately press Quick stand is programmed. 4
- To travel to the Quick Sit Stand, press and hold .
Program Positions 3, 4 or 5
- Move the table to desired height for position 3.
- Press once and immediately press once.
- The Menu mode icon will appear in the top left corner.
- Press until the display reads 3.
- Press to store p osition.
The display will confirm the setting by flashing three times. Repeat steps above for positions 4 and 5, navigating to Presents 4 and 5 respectively.
To Travel to Stored Positions 3, 4 or 5
- Press once. The memory icon will appear in the top left corner.
- Use to navigate to stored positions 3, 4 or 5
- Press and hold while the table moves to the stored position.
Operating the Table
Tone and Antenna Telescope feature press-and-hold adjustments to prevent
injury to users and damage to surrounding objects. To adjust the table up or
down or to move to any of the preset heights, a user must press and hold the
appropriate button.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>