ERMENRICH VE40 Seek Industrial Endoscope User Manual

: June 8, 2024
: ERMENRICH

Table of Contents

ERMENRICH VE40 Seek Industrial Endoscope
OVERVIEW
Getting started
Usage
Specifications
Care and maintenance
Battery safety instructions
Levenhuk International Warranty
Specifications
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ERMENRICH VE40 Seek Industrial Endoscope

OVERVIEW

Power button
Charging indicator
Operation status indicator
LCD-display
Camera light button
Set button
Down button
OK button
Up button
M button
Photo/video button
Micro SD card slot
Power input
Side camera lighting
Side camera*
Front Camera
Cable
Release button
- Only for VE60/VE70 models

Please carefully read the safety instructions and the user manual before using this product. Keep away from children. Use the device only as specified in the user manual.

The kit includes an LCD digital endoscope, micro USB cable, accessories (hook, magnet, side mirror, protective cap), user manual, and warranty.

Getting started

Charging the device
This device uses a rechargeable Li-ion battery. Assemble the device before charging. Connect the power cable to the device and the 5V, 1A DC adapter for charging (not included) via a USB plug and connect it to the AC power supply to charge the battery. When using the device for the first time, charge it for at least 2.5 hours.

Assembly/disassembly

Align and connect the display and handle connectors. To disassemble, press the release button (18) to remove the display.
Align the cable and handle slot; then, press and connect the cable to the handle. Screw the buckle.

Installing/removing the memory card
The device supports microSD memory cards class 10 up to 64GB (not included).

Insert the microSD card into the slot (12). Do not force the card in.
To remove the card from the slot, press the edge of the memory card in gently, and the card will pop out. Then, remove the card.

Installing the Accessories
Install the accessories as shown below:

Usage

Insert the microSD memory card.
Press and hold the Power button (1) for 3 seconds to turn the device on/off. The operation status indicator lights up in blue when the device is on.
Press the Camera light button (11) to adjust the camera light brightness (100 / 80 / 60%).
Put the probe into the area to be inspected. The camera view will be displayed on the screen.
Press the M button (10) to switch the photo mode, video mode, and file view.
To take a picture or to record a video, press the Photo/Video button (11). To stop recording, press this button again.
Press the Down button (7) to rotate the image by 180°. Press the OK button (8) to freeze the image. Press the Up button (9) to zoom the view (1x-1.3x-1.5x).
To switch between the front camera and the side camera views, press and hold the Photo/Video button (11)**.
Press the Set button (6) to enter the menu to change the settings, such as brightness, resolution, and language. Use the Up (9) and Down (7) buttons to scroll the menu. Press the OK button (8) to confirm the selection. To delete the recorded files, select the files and press the Set button (6). Press the Set button (6) to return to the previous menu.

Only for VE40/VE50 models
Only for VE60/VE70 models
The micro USB cable is used for charging only, not for data transfer.

Specifications

Care and maintenance

Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center. Protect the device from sudden impact and excessive mechanical force. Store the device in a dry cool place. Only use accessories and spare parts for this device that comply with the technical specifications. Never attempt to operate a damaged device or a device with damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention immediately.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one time; taking care not to mix old and new ones or batteries of different types. Clean the battery contacts and also those of the device before battery installation. Make sure the batteries are installed correctly about polarity (+ and –). Remove batteries from equipment that is not to be used for an extended time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries to revive them. Do not disassemble batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid the risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.

Levenhuk International Warranty

Levenhuk products, except for their accessories, carry a 5-year warranty against defects in materials and workmanship. All Levenhuk accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions are met. For further details, please visit: levenhuk.com/warranty If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.

Levenhuk Inc. (USA): 928 E 124th Ave. Ste D, Tampa, FL 33612, USA, +1-813-468-3001, contact_us@levenhuk.comLevenhuk Optics s.r.o. (Europe): V Chotejně 700/7, 102 00 Prague 102,Czech Republic, +420 737-004-919, sales-info@levenhuk.cz Levenhuk®, Ermenrich® are registered trademarks of Levenhuk, Inc.© 2006–2024 Levenhuk, Inc. All rights reserved. www.levenhuk.com 20240117

Specifications

Model: Ermenrich Seek VE40/VE50/VE60/VE70 Industrial Endoscope
Display: LCD
Memory Card Support : microSD up to 64GB (not included)
Battery : Rechargeable Li-ion

FAQ

Q: What is included in the kit?
A: The kit includes an LCD digital endoscope, micro USB cable, accessories (hook, magnet, side mirror, protective cap), user manual, and warranty.

Q: How do I charge the device for the first time?
A: Connect the power cable to the device and a 5V, 1A DC adapter. Charge the device for at least 2.5 hours before initial use.