TAOTRONICS True Wireless Stereo Earphones User Guide

: June 7, 2024
: TaoTronics

Table of Contents

Product Diagram
Package Contents
How to Use
- How to Wear
Charging
- Charging the Earbuds
- Charging the Charging Case
Pairing
- Couple Earbuds Mode
- Single Earbud Mode (Only Functional via Left Earbud)
Operation and Functions
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TRUE WIRELESS STEREO EARPHONES
TT-BH053
User Guide

Product Diagram

Charging Indicators
LED Indicator
Touch Control
Charging Contacts
Micro USB Input Port

TAOTRONICS True Wireless - Product Diagram

DANGER:
This product contains a lithium battery. Never expose it to strong sunlight or toss it into ﬁre to avoid explosion.

Package Contents

1 x Charging Case
2 x Earbuds
1 x USB Charging Cable
6 x Ear Tips (two are equipped on the earphones)
1 x User Manual

How to Use

How to Wear

Charging

Charging the Earbuds

Put the earbuds into the charging case properly, and charging will start automatically. The LED indicator will ﬂash blue slowly when charging and turn off once fully charged.

Charging the Charging Case

Connect the Micro USB charging port with any USB output port, and charging will start automatically. The charging indicators will light up progressively.
Note:

Never pull the charging contacts with force to avoid malfunctions.
Please charge the earbuds and charging case for the ﬁrst use or reuse after a long idle time.

Pairing

Couple Earbuds Mode

Take out the earbuds from the charging case, and they will connect with each other automatically. Once connected, the LED indicator on the left earbud will ﬂash blue and white alternately and the LED indicator on the right earbud will ﬂash white slowly.
Turn on the Bluetooth function on your device and search for nearby devices. Find “TaoTronics TT-BH053” in the searching results. Tap on the name to connect. Once connected, the LED indicators on both earbuds will ﬂash white once every 5 seconds.

Single Earbud Mode (Only Functional via Left Earbud)

Take out the left earbud from the charging case, it will try to connect the previously paired device ﬁrst and then enter pairing mode if the connection failed with the LED indicator ﬂashing blue and white alternately.
Turn on the Bluetooth function on your device, search for nearby devices. Find “TaoTronics TT-BH053” in the searching results. Tap on the name to connect.

Note:
If you want to change to couple earbuds mode from single earbud mode, simply take out the right earbud from the charging case, they will pair with each other automatically.

Operation and Functions

Function	Operation
Answer Phone Call	Tap the Touch Control on either of the earbuds once
Hang up Phone Call	Tap the Touch Control on either of the earbuds twice
Reject Incoming Call	Tap and hold the Touch Control on either of the earbuds

for 2 seconds
Previous Track| Tap the Touch Control on the left earbud three times
Next Track| Tap the Touch Control on the right earbud three times
Play / Pause| Tap the Touch Control on either of the earbuds twice
Volume –| Tap the Touch Control on the left earbud
Volume +| Tap the Touch Control on the right earbud
Turn On / Off Voice Control| When paired successfully, press and hold the Touch Control on either of the earbuds for 2 seconds until a beep is heard

FAQ

Q: Failed charging of the charging case.
A: Make sure the charging cable is intact and plugged in properly.
Q: The signal of the earbuds is unstable and there is no sound in the earbuds.
A: Please wear the earbuds properly and put your phone in the front pocket when using it outdoor.
Q: Two devices named “TaoTronics TT-BH053” are found.
A: Delete both names and search again.
Q: Sound is unclear.
A: Increase the volume slowly on your phone and earbuds and keep them close to each other.
Q: What’s the effective range between the two earbuds?
A: Around 3 meters / 9.8 feet.

Note:

If your earbuds failed to pair with each other, please restore to factory settings as per the instructions below:

Place the earbuds into the charging case, tap, and hold the Touch Control of both earbuds for 10 seconds until the LED indicators ﬂash twice to enter reset mode.
Take out both earbuds, and they will pair with each other automatically.
Pair them with your device when the LED indicator on the right earbud ﬂashes blue and that on the left earbud ﬂashes blue and white alternately.
If you have paired your device with the earbuds before, remove “TaoTronics TT-BH053” from the Bluetooth device list and pair again.

Extra attention is needed when wearing the earbuds to avoid accidental tipping of the Touch Control.
It is not recommended to wear the two earbuds on different people.
If need to do so, please keep the 2 earbuds within 9.8ft in couple earbuds mode.
The volume cannot be adjusted in single earbud mode.

Warning

Never dismantle or reﬁt the product to avoid malfunction or ﬁre hazards.
Keep away from corrosive liquids to avoid damages to the product.
Keep away from extreme temperatures.
Keep away from children and pets.
Don’t use the product in thunderstorm weather to avoid malfunction or electric shock.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sunvalleytek International Inc. is under license. Other trademarks and trade names are those of their respective owners.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.

www.taotronics.com

NORTH AMERICA
E-mail: support@taotronics.com(US)
support.ca@taotronics.com(CA)
Tel : 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST)
US Distributor: SUNVALLEYTEK INTERNATIONAL INC.
Address:46724 Lakeview Blvd, Fremont, CA 94538
MANUFACTURER
Manufacturer: Shenzhen NearbyExpress Technology Development Co.Ltd.
Address: 333 Bulong Road, Shenzhen, China, 518129
Learn more about the EU Declaration of Conformity:
https://www.taotronics.com/downloads-TT-BH053-CE-Cert.html