ONE FOR ALL URC2110 Essence TV Universal Remote Control Instruction Manual

: June 10, 2024
: ONE FOR ALL

Table of Contents

ONE FOR ALL URC2110 Essence TV Universal Remote Control
INTRODUCTION
BATTERIES
KEY DESCRIPTIONS
SETUP
CODE LIST
WARRANTY/GUARANTEE
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ONE FOR ALL URC2110 Essence TV Universal Remote Control

INTRODUCTION

Thank you for purchasing the One For All Essence TV Universal Remote Control. The remote can be used to control a TV and boasts multiple extra features to make the most of your living room experience. This manual will help you to set up the Essence TV to take advantage of its features.

BATTERIES

Your remote requires 2 x AAA / LR03 batteries (not Included). Please insert them as shown below. Alkaline batteries are recommended.

$ONE-FOR-ALL-URC2110-Essence-TV-Universal-Remote-Control-fig- $1$$

CAUTION:
Risk of explosion if the battery is replaced by an incorrect type. Use quality Alkaline batteries.

KEY DESCRIPTIONS

$ONE-FOR-ALL-URC2110-Essence-TV-Universal-Remote-Control-fig- $2$$

Power Switches your devices on and off.
Setup This key is used to set up the Essence remote.
Input Used to select Input on devices.
Digits Select channels on the current device.
Delimiter “Dash” key
Selects sub-channels such as local news.
Channel Enter
On some devices press this key after using the digit keys to enter your channel number.
Guide TV Guide.
Info Displays information about the current shows or channels.
Menu Access the installation menu.
Menu Directions and OK
Control the menu.
Back one step in the Menu.
Exit Exits the menu.
Home Displays the Home Menu.
Channel Up & Down
Change channels on the current device.
Last Channel Changes to the last channel viewed.
Volume Up and Down
Control the volume.
Mute Mutes the volume..
RGYB keys Quick access buttons for the menu of the current device.
Playback Keys
Control the playback of movies, music and TV.
Live Return to live TV from Timeshift or recording.
List Show list of recordings.
Replay last 30 seconds.

SETUP

The Essence TV remote is pre-programmed to control a Samsung TV out of the box. If you have a Samsung TV, after you have inserted the batteries, press a few keys to confirm that the remote operate your TV.

SIMPLESET
If the brand of your device is shown in the SimpleSet List next to a digit key, you can use the SimpleSet system described in this section, please locate the brand of your device and note the key associated with it.

TV

$ONE-FOR-ALL-URC2110-Essence-TV-Universal-Remote-Control-fig- $3$$

To set up your device:

Turn on your device (not on standby) and point the Essence remote towards it.
Hold down the SETUP key until the LED blinks twice
Hold down the digit key for your brand as listed in the tables above – e.g. 3 for a Philips TV.
The remote will send a Power command every 3 seconds.
As soon as your device reacts by turning off or
The LED will blink twice and the remote should now operate your device.

If you find one or more keys do not work as you expect, start again at step 2 – the remote will start with the next code in the memory.

SETUP BY CODE

If the brand of your device is not listed in the SimpleSet feature, you can set up by trying codes individually. To do this, firstly locate your brand in the Code List. Codes are listed by brand and device, and in order of popularity.

Turn on your device (not on standby) and point the Essence remote towards it.
Hold down the SETUP key until the LED blinks twice
Enter the first 4 digit code listed for your brand (e.g. 1840 for LG).
The LED will blink twice on the last digit of the code.
Now aim the remote towards your device and press the POWER key.
If the device turns off your remote is ready to use. If not, repeat steps 2-5 with the next code in the list.

LEARNING

Your Essence remote control can learn any function from any other working remote control. This is a quick and easy one-time setup that allows you to control any infrared controlled device you have in your living room. It also allows you to add a key or keys that may be missing to a spare key on the Essence. To do this, firstly make sure you have all your original remote controls to hand, and that they have working batteries in. To learn functions, the original remote should be approxima-tely 2-5 cm from the Essence remote, pointing towards it:

$ONE-FOR-ALL-URC2110-Essence-TV-Universal-Remote-Control-fig- $9$$

Hold down the SETUP key until the LED blinks twice.
Press 975 – the LED should blink twice.
Press and release the key you want to learn a function onto (for example the POWER key) – the LED will begin to flash rapidly.
Press and release* the corresponding key on the original remote, for example POWER.
The LED will blink twice to indicate the key has been learned correctly.
Repeat steps 3 and 4 for each key you want to learn – remember you can learn from multiple remotes, but only one function per key.
When you have learned all the functions you require, press and hold SETUP key until the LED blinks twice.

Some remotes send commands differently. If you find a function cannot be learned, try holding down the key on the original remote instead of pressing and releasing.

Hints:

If the LED shows one long blink at step 5, the function was not learned correctly, please try again from step 4.
If you find one or more keys don’t work properly after set up, you can re-enter the learning mode at any time by repeating the procedure from step 1.
If one or more of your original remotes aren’t working, you can still set up the Essence remote by SimpleSet or Code Set Up.

Deleting a learned function
If you want to delete a learned function and return that key to its original state, you can use the following procedure:

Hold down the SETUP key until the LED under the Device key blinks twice
Press 976 – the LED should blink twice
Press the key you want to reset twice – the LED should blink twice and the learned function has been deleted.

SOUND BAR/AUDIO RECEIVER VOLUME CONTROL

If you have your TV connected to a Sound Bar or Audio Receiver, it’s possible to set up your Essence remote to control the Volume and Mute of this device. There are two ways to do this:

AUDIO SIMPLESET
If you have a Sound Bar or Audio Device from one of the brands listed in the table below, you can use the simplest method to program your remote to control it. If you do not have one of the below brands, please proceed to the next section.

$ONE-FOR-ALL-URC2110-Essence-TV-Universal-Remote-Control-fig- $13$$

Note that each of the brands has a digit associated with it, for example 4 for LG. To set up your remote to control your sound bar / audio device, first, make sure your TV and sound bar / audio device are both powered on, and that there is something playing that you can hear (this procedure will test the Mute function).

Next:

Hold down the SETUP and VOLUME UP buttons together until the LED blinks twice.
Now point the remote towards your sound bar/audio device and hold down the digit key for your brand (for example 4 for LG). The remote will send the Mute command to your device every 3 seconds.
As soon as your sound bar/audio device mutes the volume, release the digit key. The LED will blink twice. The remote has now found the correct code for your Audio Device.
Next, hold down the SETUP and VOLUME DOWN keys until the LED blinks twice. The volume up, down and Mute keys should now control your Audio Device.

AUDIO CODE SETUP
If your Sound Bar / Audio Device is not one of the brands listed above, you can also set up the remote to control it by entering a 4 digit code. The codes are listed in the Audio Codelist section of this manual, and are listed by brand and then popularity. Locate the brand of your sound bar / audio system in this code list and then the procedure is:

Hold down the SETUP and VOLUME DOWN keys until the LED blinks twice.
Next, hold down the SETUP and VOLUME UP keys until the LED blinks twice The remote is now ready to be programmed and, at this point, the LED will not blink when the Volume up or down keys are pressed.
Enter the first 4 digit code for your sound bar/audio device. The LED should blink twice on the last digit.
Now try the VOLUME UP, DOWN and MUTE and see they control your sound bar or audio device.
If they work, your remote is set up. If not try again from step 1 using the next code in the list.

RESET VOLUME CONTROL
To reset the volume control to the original setting:

Hold down the SETUP and VOLUME DOWN keys until the LED blinks 4 times. Volume control is now reset.

CODE LIST

TV			Exorvision	3953
		Favi	3382
Affinity	3717, 3870, 3577,		Fisher	1362
3716		Fluid	2964, 3559
Aiwa	3332, 1362		Furrion	3332, 4093, 5410
Akai	1675, 3332		Gateway	1755
AOC	3720, 2691, 1365,		GE	1447
2014, 2087		GFM	1864, 1886, 1963
Apex Digital	2397, 4347, 4350		GHIA	5144, 5196
Ario	2397		GPX	3980, 3977
Asus	3340		Haier	2309, 1749, 1748,
Atak	2397			3382, 1753, 3429,
Atvio	3638, 4398, 3636,			2293, 4398, 2214
3879		Haier-Roku	4398
Atyme	2746		Hannspree	1348, 2786
Audiovox	1564, 1276, 1769,		Harper	3332
2121		Hewlett
Auria	4748, 2087, 2014,		Packard	1860
2277, 2855		Hisense	3519, 4740, 4618,
Avera	2397, 2049			2183, 5185, 1660,
Avol	2735, 4367, 3382,			3382
3118, 1709		Hisense-Roku	4740
Axess	3593		Hitachi	1643, 4398, 5102,
Blu:sens	2735			4455, 2214, 3382,
Bolva	2397			3332, 0679, 5446
Broksonic	1892, 3118		Hitachi-Roku	4398
Calypso	4748		Hiteker	3118
Champion	1362		HKPro	3879, 2434, 5228
Changhong	4629		HP	1860
Citizen	1892		iLo	1463, 1394
Coby	3627		InFocus-Roku	4398
Contex	4053, 4280		Insignia	2049, 1780, 4487,
Craig	3423, 1687			3227, 5213, 1564,
Crosley	3115			1641, 2184, 1892,
Curtis	2855, 3577, 2466,			1423, 1660, 1963
3895, 2352, 2397,		Insignia-Roku	4487
3939, 4035, 3636,		iSymphony	3382, 3429, 3118,
3382, 3717, 4139			3094
Curtis Mathes	1661		JVC	1774, 1601, 3393,
Daewoo	1661, 3115, 3879			2321, 2271, 4107,
Dell	1749			4398, 5182, 4105,
Digitrex	4207			4053, 1670, 4367,
Disney	1892			1892, 3879, 4280,
Durabrand	1595, 3879			5228
Dynex	2049, 1463, 1780,		JVC-Roku	4398
2184		KC	4182
Electrograph	1755		KDS	1687
Electrohome	1670		Kenmore	3953
Electron	2466, 2855		LeEco	4007
Element	3559, 1687, 4398,		Legend	2397, 2352, 1749,
2183, 2964, 5173,			2309
4635, 4910, 1886,		Lexus	3638
4217, 4740		LG	1840, 1860, 2731,
Element-Roku	4398, 4740			1423, 4397, 2358,
Elite	1457			1749, 4398, 1753
Emerson	1864, 1963, 1394,		MAG	1687
1886, 1595, 3623,		Magnavox	3623, 1866, 2372,
1661, 2183, 3559			1963, 1454, 1365,
Envision	1365, 2087, 2014			1755, 4398, 1867,
EQD Auria	2014, 2087, 2277			4740, 1394
ESA	1963, 1595
eTec	2397
	16

TV-AUDIO SOUNDBAR

Magnavox-
Roku 4398, 4740
Marantz 1454
Maxent 1755
Memorex 4686, 1892, 1670, 1687, 2049
Mitsubishi 1250, 1797
Mitsui 1123, 3638, 3673
Naxa 4093, 2104, 2735, 3382, 3423
NEC 3257, 1797, 3000, 2293
NetTV 1755
Nexus 1564, 3519, 2183
Norcent 1365, 2087
NuVision 1657, 4347
oCOSMO 3899, 4139
Ölevia 1610
Onn 4398, 5348, 1709, 3024, 3078, 5118
Onn-Roku 4398
Optimus 0679
Orion 1463, 1670, 3540, 1892
Panasonic 1480, 1291
Philco 1963, 1394, 5377
Philips 2800, 1867, 2372, 3069, 1454, 3623, 3396, 1866, 1744, 4398, 1963, 1755, 1365, 1394
Philips
Magnavox 3396, 1866, 3623
Philips-Roku 4398
Pioneer 0679, 1260, 1457, 2434
Planar 0679
Polaroid 1523, 4035, 1769, 1276, 1687, 1767, 3942, 2121, 3382, 2434, 3118
Portland 1661
Prima 1753, 2049, 1749
Proscan 1447, 3577, 3382, 2183, 3717, 3332, 4494, 3636, 3895, 3953, 4495, 4035, 4053, 4491, 3939, 4483, 4375, 4500, 2746, 3429, 3559, 4093
Proview 1687
Pyle 2196
QFX 3593
QuantumFX 3593
Quasar 1291, 4207, 3899, 4367, 3382, 5221
RCA 2746, 2434, 2247, 4214, 3577, 1781, 4398, 3382, 4740, 3332, 3717, 2932, 3895, 2187, 4629, 4488, 4494, 3953, 2183, 4623, 3636, 3939, 2855, 4053, 3519, 4491, 4495, 4627, 0679, 4035, 4483, 4625, 5223, 1661, 5377, 3938, 4093, 1670, 5173, 1447
RCA-Roku 4398, 4740
Roku 4398, 4740
Sampo 1755
Samsung 2051, 1632, 5386, 5371
Sansui 1892, 3540, 1670, 1463, 4053, 3564, 4280, 3559
Sanyo 1142, 1362, 4168, 4740, 2049, 4667, 3488, 1480, 1564
Sanyo-Roku 4740
Sceptre 3899, 4139, 2528, 5393
Seiki 3953, 4635, 2964, 3560, 3559, 4217, 3382, 4794
Seura 4751
Sharp 2360, 1659, 3519, 3394, 4740, 4618, 3720, 4507, 2214, 4398
Sharp-Roku 4740, 4398
Sigmac 3477, 3423
Silo Digital 3899, 4494, 3477, 4182
SkyVue 4135, 2360
Skyworth 5340, 4542
Sony 0810, 4448, 4189
Spectroniq 1687
Speler 4105, 4041, 2434
SunBriteTV 2528, 4139, 1610
Superscan 1963
Supersonic 3593, 2104, 1753
SVA 1963
Sylvania 1963, 1864, 1886, 1394, 1595, 3332, 3577, 4053
Symphonic 1963, 1595, 1394
TCL 4398, 2434, 3183, 5446, 3879
TCL-Roku 4398
Technicolor 3577
Toshiba 2724, 3945, 5213, 4885, 5394
Upstar 4182, 4405, 3899
V7 Videoseven 2087

Vidao	2397	Enclave Audio	4800
Videoseven	2087	Energy	4941
Viewsonic	2014, 2277, 2087,	Episode	5107
3706, 1755, 2049,	Epworth	0158, 1243
1860, 1564, 1365	GE	3297
Viore	3382, 2352, 3118,	GPX	5103
2104, 3429, 3094	Haier	3516
VisionQuest	1687	Harman/
VIZIO	1758, 3758, 4905,	Kardon	2241, 0110, 2443,
5454, 4723, 2707,		1304, 3320, 4186,
2757, 3415, 2512		3418, 3756, 3391,
W Box			3517
Technologies	4686	iLive	3175
Westinghouse	1712, 4797, 3559,	Inkel	3770, 4090, 3793
3382, 4398, 5173,	Insignia	3951, 2169, 2472,
4910, 2293, 3094,		2966, 3770, 4424,
4139, 3560, 4635,		1077
2397, 3908	Integra	1805, 3860, 2730,
Westinghouse-			4023, 4014, 2503,
Roku	4398		3992
White		Jamo	4941

AUDIO SOUNDBAR

Proficient 3661
Pyle 4333
RCA 2041, 2611, 3297, 2719, 2655, 3969, 1023, 2544, 5490
RichSound
Research 5138
Roku 5495
RSR 5138
Samsung 2660, 1868, 2809, 3320, 3382, 3154, 2137, 1304
Samsung
Harman/Kardon 3320
Sanyo 4176, 3282
Sceptre 5351
Sennheiser 5330
Sharp 3097, 3736, 3929
Sherbourn 3763
Sherwood 1077, 1567, 3120, 3136, 2169, 3793, 4090, 3770
Sherwood
Newcastle 1567, 2169
SnapAV 5107
Sonos 3919
Sony 1622, 3700, 2172, 4315, 1759, 1822, 2522, 2475, 1758, 3257, 2582, 3487, 4457, 0158, 4285, 4366, 2610
Soundcore 5578
SpeakerCraft 3661
Stereophonics 1023
TaoTronics 4672
TCL 4672, 5385
Toshiba 3627
VIZIO 3935, 2454, 5095, 4911
Yamaha 2467, 2116, 3580, 3030, 2458, 3325, 3917, 4269, 2021, 0176
Zenith 1293, 2197
ZVOX 2332, 3913, 2334

WARRANTY/GUARANTEE

WARRANTY/GUARANTEE INFORMATION
Terms and Conditions for “100% Guaranteed To Work” policy, and the separate 1 Year Limited Warranty against defects in material and workmanship can be found at www.oneforall.com/remoteguaran-tee, or you may request hard copies via mail to Universal Electronics Inc. 15147 N. Scottsdale Road, Suite H300, Scottsdale, Arizona 85254. Please include your full name, product information, and contact information in your request communication.
www.oneforall.com.