ERMENRICH WM10 Reel Digital Measuring Wheel User Manual
- May 15, 2024
- ERMENRICH
Table of Contents
ERMENRICH REEL WM 10/WM
20/WM 30
DIGITAL MEASURING WHEEL
USER MANUAL
WM10 Reel Digital Measuring Wheel
- ON/OFF button
- M/FT | UNITS button
- SM|SAVE button
- RM | MEMORY * button
- CLR| CLEAR button
- HOLD button
- Battery compartment
- Measuring wheel
- LCDdisplay
- Keyboard
- Handle
- Handle lock
- Stand
Please carefully read the safety instructions and the user manual before using this product. Keep away from children. Use the device only as specified in the user manual.
**Getting started
**
- Open the battery compartment cover and insert 2 AA batteries. Close the cover.
- The length of the handle can be adjusted to the height of the user. To set the desired handle length, open the handle lock, extend the telescopic handle, and then lock it in place.
- Before starting measurements, always lift the stand. It is not recommended to measure with the stand unfolded.
**Usage
**
- To accurately measure the distance between two points, set the wheel on the beginning point, push the ON/OFF button and walk to the end point. With the handle in the same position as it was when measurement started, read the distance directly from the counter.
The measurement results will appear on the LCD screen.
**Settings
**
- ON/OFF. Press the power button to turn the device on/off. When the device is on, the display will show 0.0.
- M/FT| UNITS. Unit conversion. Press the button to switch between metric and imperial units of measurement.
- SM|SAVE. Data storage. Press the button to store the memorized data (max. 5 records: M1-M5).
- HOLD. Freeze mode. If you want to move the device, press the HOLD button to freeze the readings.
- RM|MEMORY. Memory recall. Pressing the button once displays the data stored in M1, twice — M2, etc. When the RM function is on, the “R” symbol appears in the upper right corner. After 2 seconds, the function automatically turns off and displays the current measurements again.
CLR| CLEAR. Data reset. Press the button once to clear the measurements.
Specifications
| WM10 I| WM20| WM30
---|---|---|---
Measurement distance (m, Fr)| | 1-99999.9| | 1-100000
Units of measurement| | m, ft| | ft, in, m, cm
Accuracy, %| ±0.3
Spacing (in increments), m| 0.1
Height (unfolded), cm/in| 90/35| 97/3.1| 100/39
Wheel diameter, cm/in| 16/6| I 32/12
History record| 5 sets
Operating temperature range, °C/°F| -10… 45/14… 113
Power supply| 2pcs AA batteries
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.
Care and maintenance
Use the device only as specified in the user manual. Keep away from children. Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center. Protect the device from sudden impact and excessive mechanical force. Do not use the product in explosive environment, close to flammable materials. Store the device in a dry cool place. Only use accessories and spare parts for this device that comply with the technical specifications. Never attempt to operate a damaged device or a device with damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention immediately.
Battery safety instructions
Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and -). Remove batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.
Levenhuk International Warranty
Levenhuk products, except for their accessories, carry a 5-year warranty
against defects in materials and workmanship. All Levenhuk accessories are
warranted to be free of defects in materials and workmanship for six months
from the purchase date. The warranty entitles you to the free repair or
replacement of the Levenhuk product in any country where a Levenhuk office is
located if all the warranty conditions are met.
For further details, please visit:
levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product,
contact the local Levenhuk branch.
Levenhuk Inc. (USA): 928 E 124th Ave. Ste D,
Tampa, FL 33612,
USA, +1-813-468-3001,
contact_us@levenhuk.com
Levenhuk Optics s.r.o. (Europe): V Chotejné 700/7, 102 00 Prague 102,
Czech Republic, +420 737-004-919,sales-info@levenhuk.cz
Levenhuk®, Ermenrich® are registered trademarks of Levenhuk, Inc.
© 2006-2024 Levenhuk, Inc. All rights reserved.
www.levenhuk.com
20231218
Documents / Resources
|
ERMENRICH WM10 Reel Digital Measuring
Wheel
[pdf] User Manual
WM10 Reel Digital Measuring Wheel, WM10, Reel Digital Measuring Wheel, Digital
Measuring Wheel, Measuring Wheel, Wheel
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>