KODAK 738LUMA400 Luma 400 Portable HD Smart Projector User Guide

: June 4, 2024
: Kodak

Table of Contents

KODAK 738LUMA400 Luma 400 Portable HD Smart Projector
INTRODUCTION
- Limited warranty
PRODUCT OVERVIEW
USING YOUR PHONE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KODAK 738LUMA400 Luma 400 Portable HD Smart Projector

INTRODUCTION

Thank you for purchasing the KODAK LUMA 400 Portable HD Smart Projector. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the

Limited warranty

This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty for details.
Please make sure to view and download the full user guide at https://www.kodakphotoplus.com/pages/luma-400-projector-support

PRODUCT OVERVIEW

A

Lens
Air Outlet
Up
Confirm / Back (press more than two (2) seconds)
Right
Left
Down
Power Indicator
Audio Output (3.5 mm)
USB-C Charging Input
USB Input/ Power Out
HDMI Input
Reset
DC Input (15 V /2 A)

B

Power
Speaker
Air Inlet
Tripod Dock
Rating Label
Non-Slip Mat
Focus Wheel
Within two (2) minutes of turning on the projector, press and hold both the Vol+ and Vol – keys for approximately three (3) seconds.
The indicator light in the remote will flash quickly during this time and then stop When the flashing stops, this indicates that the remote has successfully paired with the projector.

NOTE: While the mouse button is activated, the Volume+ or Volume – keys will

USING YOUR PHONE

For greater ease of use and a more intuitive experience, you can control the projector with the KODAK LUMA App from the Apple App Store® or the Google Play™ store.
Once installed, you can use your phone as a remote to navigate through menus, mirror your screen, easily input login information for apps, and control media volume. Make sure to try out the reverse screen mirroring feature, which allows you to view the LUMA interface directly on your phone, and navigate that way!

Search for the KODAK LUMA 1n your phone’s app store.
Download the app, and make sure that your phone 1s connected to the same Wi-Fi network as the projector.
Open the app and follow the instructions to pair it with the projector to enable remote functionality.

Scan this QR code to download the KODAK LUMA App and use your phone as a remote!

Scan this QR code to find out more about the KODAK LUMA App and all its great features .function as page up and down.

CHARGING THE PROJECTOR

Before using the projector, connect it to the charger and allow it to fully charge.
Always use the original charger that was provided to ensure proper charging.
If the red indicator LED light is flashing, you see a red battery icon in the upper right corner of the screen, or you receive a Low Battery notification on-screen, this means that the battery is low. While the projector is charging, the indicator
LED will be a solid red light. Once charging completes, the indicator LED will change to a solid white light.
To charge the projector, connect the charging cable to the USB-C charging port or connect the DC adapter to the DC port.

POWERING THE PROJECTOR ON/OFF

To turn the projector on or off, hold the power button on the side for three (3) seconds.
NOTE: The projector can be turned on or off with the remote control by pressing the POWER button when projector is connected to a power adapter.

ADJUSTING THE FOCUS

If the image on the screen appears fuzzy or unfocused when you turn the projector on, use the focus wheel on the side to correct the image. Turn the
wheel up or down until the image appears sharp and clear.

CONNECTING TO AN EXTERNAL DEVICE

To access photos or videos stored on any USB drive, insert the drive into the corresponding port on the side, then navigate to Source> File Browser. If you’re using an HDMI compatible device, connect an HDMI cable from the device to your projector to access and view images and pictures. An HTMLs-to-HDMI cable is included. If your device requires an adapter, you will need to purchase it separately. For audio devices or headphones, there is an AUDIO OUT jack on the left side.

NOTE : If you connect an HDMI device as well as a USB drive, the HDMI device will take precedence over the USB drive and you will need to disconnect it to access the other connected sources.

CONNECTING TO A WIRELESS NETWORK

Connecting to the wireless network will allow you to use any of the pre-loaded apps featured on your projector’s home screen, as well as download apps from the app store. This is a necessary step to allow you to take advantage of the Android operating system.

From the home screen, select Settings> Wi-Fi.
Select the correct network from the list and use the arrows on top of the projector or the remote to navigate the keyboard and enter the password.

The projector should connect to that network whenever it is in range.

CONNECTING A BLUETOOTH DEVICE

From the home screen, select Settings.
From the Settings menu, select Bluetooth.
Turn on the device you want to connect to your projector.
Select the device on the Bluetooth list to connect.
Wait a few minutes for your projector to connect to your device.

SCREEN MIRRORING (ANDROID/WINDOWS – MIRACAST®)

From the projector home screen, navigate to the Source page, select Screen Mirroring, and then select Miracast®. The name of the projector will
Make sure your device is connected to the same network as your projector.
Activate the screen mirroring software on your device.
- To activate screen mirroring on your Android1 M device: EN I 12
- On Samsung devices, swipe down from the top notification bar to the expanded view, and then swipe left(if necessary) and touch the SmartView icon to activate screen sharing.
  NOTE : Check your device settings for the screen casting/screen mirroring options. The name of the function may vary by device model and service carrier. Other names used may include Cast or Screen Mirroring, as well as Smart View. All devices must be running at least Android version 4.1.2.
- To activate screen mirroring on your Windows® 10 device:
- From the start menu, select Settings.
- In the Settings menu, select Devices.
- On the left side of the Devices menu, select Connected
  Devices, and then click Add a Device.
Select the projector from the list of devices and select Connect.
A dialog box will pop up on the projector screen for you to confirm the connection; use the arrows or the remote to highlight Accept and press
the confirm button.
Your screen will now be mirrored to the projector.
When finished, select Disconnect on your device.

CUSTOMER SERVICE CONTACT INFORMATION

Should you experience any problems with your product, please contact us before returning the item to the place of purchase. We’re here to help!
U.S. Support: kodak@camarketing.com I 844-516-1539
International Support: kodakintl@camarketing.com I 844-516-1540