KYATE RACK-4FT Tutorial for 4ft Firewood Rack Instruction Manual
- June 17, 2024
- KYATE
Table of Contents
KYATE RACK-4FT Tutorial for 4ft Firewood Rack
Tools Required
Installation
-
Install pipe (B] and pipe (D], connect them with screws 101, and tighten the screws with 161. Repeat this step for 2 steps
Tips: Use tools 1©1 and IG to tighten the screws to the tightest, the firewood rack will not be easy to shake -
Use 2 pipes [A] to connect the ones installed in the previous step, and fix them with screws 131
-
Connect pipe [C] on the right side, and use the screws 1O1 and I©l to pass through the iron sheet [F) to fix together
-
Use screws 11 and nuts 11 to fix the iron piece [Fl on the pipe leg. It is necessary to use tools 101 and [Ol in combination to tighten the screws
-
Repeat step 4
-
Connect pipe [E] on the right side, and use screws 1O1 and I®l to pass through the iron sheet Fl and fix them together
-
Use the screw 1©1 to connect the pipe DI
-
Connect the pipe [A] with screw 101
-
Fix the iron piece (G] at the corresponding position in the picture, and use the screw 1©1 to fix it
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>