BRAINZ 38504 Mini Pro Camera Instruction Manual
- June 6, 2024
- BRAINZ
Table of Contents
BRAINZ 38504 Mini Pro Camera
This is what you need:
- USB Cable (included)
- Camera clip (included)
- Mounting platform (included)
- SD Card (not included)
Product description:
A mini action camera that comes with two clips to attach it to, for example,
clothing or a fixed location. You can switch it on
by pressing the button on the camera. The video recorded in HD quality and
stored on an SD card (not included).
This is how to charge it:
Charging can be done via the USB port of your PC or via a USB adapter. Connect the camera to the supplied cable and then plug it into a power supply. Charging during filming. Connect the camera to the supplied cable and plug it into a 5V power bank with USB connection. The camera is not yet fully charged when the light flashes red. When the light is solid red, the camera is fully charged.
TIP : When the light keeps red, disconnect the camera and connect it to a
power supply again. In this way you can check if the
camera is fully charged.
This is how to set it up:
Make sure the camera is properly charged. Insert a Micro SD card into the camera. If you do not do this, the camera cannot take pictures. You can optionally mount the camera using the supplied clip and mounting plate.
Cable functions:
The supplied cable can be used for various things. You can connect the cable
to your camera and plug it into your computer to charge the camera. You can
also connect the cable to your camera and insert it into a 5V power bank with
USB connection to charge the camera. You can also connect the cable to your
camera and then plug the yellow TV OUT cable into your television to view your
videos and photos on TV.
720p video recording:
Press and hold the ON button for 2 seconds to turn on the camera. Then press
the ON button once to start filming. To stop filming, press the ON button once
again. The camera stores videos of 5 minutes at a time.
1080p video recording:
Press and hold the ON button for 2 seconds to turn the camera on. Then press
the MODE button once, this should light up a red and a blue light. Then press
the ON button once to start filming, this will cause the red light to flash.
To stop filming, press the ON button once. The camera stores videos from 3 to
5 minutes at a time.
Photography:
Press and hold the ON button for 2 seconds to turn on the camera. Then press
the MODE button twice, a red light should come on. To take photos, press the
ON button once.
Infrared camera:
Press and hold the ON button for 2 seconds to turn on the camera.
Power on : Press and hold the ON button for 2 seconds and see if a red
light starts flashing twice. The infrared camera is now on.
Power off: Press and hold the ON button for 2 seconds and see if a red
light starts flashing three times. The infrared camera is now turned off.
Comments:
When the battery is empty or the SD card is full, the light will flash red or
blue for 5 seconds. After this, the camera will turn itself off automatically.
If there is an SD card in the camera at the time of shutdown, the videos and
photos taken will be saved first. After the camera has turned itself off
automatically, it is not possible to turn the camera on for one minute. If the
battery is empty, charge the camera. Press and hold the camera for 6 seconds
to turn the camera off.
This manual is applicable for item number 38504.
More information about this product is available on www.brainz-
electronics.nl