Hisense 2.1CH Soundbar with Wireless Subwoofer HS218 User Guide

Quick Start Guide
2.1CH Soundbar with Wireless Subwoofer
Model: HS218

| • Simple setup
• One remote
• Quick settings
---|---

Dalby Audio
Roku TV Ready and the Roku TV Ready logo are trademarks of Roku, Inc.

What’s in the Box

Main Unit

Bracket(x2) / Wall Plug(x2) / screw(x2) / bracket screw(x2)

Remote control

(MUTE

| Mute or resume the sound.
3|

SOURCE

| Select the play function.
4|

(BT)

| Select the Bluetooth mode.
5|

VOL+/VOL-

| Increase/decrease the volume level.
6| | Skip to previous/next track in
Bluetooth/USB mode.
7| | Play/pause/resume playback in Bluetooth/USB mode.
Press and hold to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device.
8|

EQ

| Select a preset sound e­ect.
9|

SURR

| Adjust the surround ON/OFF.
10|

DIMMER+/-

| Adjust display brightness.
11|

BASS

| Press to activate the bass setup.
12|

TREBLE

| Press to activate the treble setup.

Replace the Remote Control Battery

1. Press and slide the back cover to open the battery compartment of the remote control.

2. Insert two AAA size batteries
   (included). Make sure the (+) and (–) ends of the batteries match the (+) and (–) ends indicated in the battery compartment.

3. Close the battery compartment cover.
   
   – Do not mix old and new batteries;
   – Do not mix alkaline, standard (Carbon-Zinc) or rechargeable (Ni-Cd, Ni- MH, etc.) batteries.

Identifying the Parts

Main Unit

1. Remote Control Sensor
   Receive signal from the remote control.

2. Display Window
   Show the current status.

3. Screws
   Remove the screws then install the wall mounting screws into the back of the unit.

4. (ON/OFF) Button
   Switch the unit between ON and Standby mode

5. +/- (Vol+/Vol-) Buttons
   Increase/decrease the volume level.
   

6. (SOURCE) Button
   Select the play function.

7. AC~ Socket
   Connect to the power supply.

8. LINE IN Socket
   Connect to an external audio device.
   

9. USB Socket
   Insert the USB device to play music.

10. HDMI ARC Socket
    Connect to a TV via HDMI cable.

11. COAXIAL Socke t
    Connect to a coaxial audio output on the TV.

12. OPTICAL Socket
    Connect to an optical audio output on the TV.

Wireless Subwoofer

1. AC~ Socket
   Connect to the power supply.

2. PAIR Button
   Press activate the pairing function between the main unit and the subwoofer.

3. PAIR Indicator
   Light up solidly when the pairing succeeds.

Connections

● Before connecting the AC power cord, ensure you have completed all other connections.

◎ Pair up with the subwoofer
The subwoofer and the soundbar will be paired automatically when both are powered on.
If no audio from the wireless subwoofer can be heard, manually pair up the subwoofer.

Basic Operation

◎ Standby/ON
When you frst connect the main unit to the mains socket, the main unit will be in Standby mode.

• Press the button on the unit or on the remote control to switch the unit ON.
• Press the button again to switch the unit back to STANDBY mode.
• Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.

Auto Wake
If a TV or an external device is connected (LINE IN / OPTICAL /
COAXIAL / HDMI ARC), the unit will switch on automatically when the TV or the external device is switched on.

Automatic Power Off Function
The unit automatically turns to Standby mode after about 15 minutes if the TV or the external unit is disconnected, switched off.

◎ Select Modes
Press the (SOURCE) button repeatedly on the unit or the SOURCE button on the remote control to select the LINE IN, OPTICAL, COAXIAL, HDMI ARC, USB, and BT (Bluetooth) mode. The selected mode will
show on the display.
◎ Adjust the Bass/Treble Level

• Press TREBLE then press VOL+/- button to increase or decrease the treble. (TREBLE+5/TREBLE–5)
• Press BASS then press VOL+/- button to increase or decrease the bass. (BASS+5 / BASS–5)
• After about 5 seconds, the unit will exit from the bass/treble setting.
  The display will show the currently selected mode. You may now press the VOL+ / – buttons to adjust volume.

◎ Turn the Surround Sound ON/OFF
Press the SURR button on the remote control to turn on the surround sound. Press this button again to turn off the surround sound.

◎ Adjust the Volume
Press the VOL+ / VOL- buttons on the unit or on the remote control to adjust the volume.
If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE button again or press the VOL+ / VOL- buttons on the unit or on the remote control to resume normal listening.

◎ Adjust the Brightness
Press the DIMMER +/- buttons on the remote control to select brightness level.

◎ Select a Preset Sound Effect
While playing, press the EQ button on the remote control to select
desired preset equalizers: MOVIE, MUSIC, NEWS.

Wall Mounting

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>