KODAK Access Webcam User Guide
- June 1, 2024
- Kodak
Table of Contents
KODAK Access Webcam
Product Information
Specifications:
- Type of Sensor: 0.594 cm CMOS
- Array Size: 1280×720 @30fps
- Pixel Size : 0.594 cm CMOS
- Array Size: 1920x1080p @30fps
- Pixel Size: IR Lens – 2.8m*2.8m FSI
- Construction: 3P
- IR Filter : 850nm
- Field of View: F/Non
Microphone Indicator
| Micro ON | Vert |
|---|---|
| OFF | Rouge |
| OFF | Bleu |
| ON | Violet |
Interface
Interface USB-C
Setup Instructions
Connecting Your Webcam
Connect your webcam to the USB port on your computer using the USB-C cable provided. No additional software installation is required.
Configuring Your Webcam
Please refer to the official website for detailed instructions: http://www.jpltele.com/kodak/kodak-access-webcam
Product Usage Instructions
Setting Up Your KODAK Access Webcam:
- Unbox your webcam and ensure all components are included.
- Place the webcam on a stable surface near your computer.
- Connect the webcam to your computer using the USB-C interface.
Configuring Your Webcam:
- Ensure your computer recognizes the webcam by checking device manager or settings.
- Adjust the webcam settings as needed through your computer’s settings or webcam software.
Using Your KODAK Access Webcam:
- To turn on the microphone, switch the Microphone toggle to ON.
- For infrared functionality, switch the Infrared Light indicator to the desired color (Green, Red, Blue, or Violet).
- The webcam supports different resolutions, select the appropriate resolution based on your needs.
FAQs
How do I connect the KODAK Access Webcam to my computer?
Use the USB-C cable provided to connect the webcam to your computer's USB port. No additional drivers or software are needed.
What are the LED indicators on the webcam?
Green indicates the microphone is on, red indicates it is off. Blue and purple colors are used for other indicators.
How can I change the resolution on my webcam?
You can change the resolution in your computer's webcam settings by accessing the resolution options provided.
Do I need additional drivers to use this webcam?
Usually, the webcam should be recognized by your computer without the need for additional drivers. However, check the manufacturer's website for any specific driver requirements.
Is the KODAK Access Webcam compatible with Mac computers?
The KODAK Access Webcam is compatible with most operating systems, including Mac OS. Ensure you have the necessary connectors or adapters for USB-C compatibility.
Where can I find more information on configuring my webcam?
Additional setup information can be found at http://www.jpltele.com/kodak /kodak-access-webcam
Contact Information
UK Office: JPL Telecom Ltd. Church Close, Todber, Sturminster Newton, Dorset, DT10 1JH, England
EU Office: JPL Telecom B.V. John M. Keynesplein 10, 1066 EP Amsterdam, NETHERLANDS
Product Website: http://jpltele.com/kodak/kodak-access-webcam
“`