HYTRONIK HBTD8200T/F 150W Trailing Edge Wireless Dimmer Instruction Manual
- June 5, 2024
- HYTRONIK
Table of Contents
Installation and Instruction Manual
Bluetooth Receiver Node – 150VA Trailing Edge Version HBTD8200T/F
Technical Specifications
| Product type | Receiver Node |
|---|---|
| Mains voltage | 230VAC 50Hz |
| Load | 1-150VA (Capacitive) / 1-150W (Resistive) |
| Stand-by power | <0.5W |
| Operation frequency | 2.4 GHz – 2.483 GHz |
| Transmission power | 4 dBm |
| Range (Typical) | 10 ~ 30m |
| Protocol | 5.0 SIG Mesh |
| Operation temperature | Ta: -20 ℃ ~ +45 ℃ |
| Case temperature (Max.) | Tc: +80 ℃ |
| Storage temperature | -20°C ~ +60°C |
| Max. relative humidity | 20 ~ 90% |
| IP rating | IP20 |
| Impulse withstand voltage | 2.5KV |
| Duty type | PTI material group IIIa |
| Insulation material | S1 |
| Glow wire | level 3, 850°C |
| Protection | Built-in protection provide |
| Insulation | Class II |
| EMC standard (EMC) | EN55015, EN61547, EN61000-3-2, EN61000-3-3 |
| Safety standard (LVD) | IEC 61058-1, EN 61058-1, IEC 61058-1-2 |
EN 61058-1-2, AS/NZS 61058.1
Radio Equipment (RED)| EN300 328, EN301489-1, EN301489-17, EN62479
Download the App
Free App for set-up and commissioning
5.0 SIG mesh
| 
---|---
| https://apps.apple.com/cn/app/koolmesh/id1483721878
https://play.google.com/store/apps/details?id=com.koolmesh.sig
Smartphone app for both iOS & Android platform
|
---|---
https://apps.apple.com/cn/app/koolmesh/id1570378349
|
---|---
http://www.hytronik.com
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using
commercially available non-latching (momentary) wall switches. Detailed Push
switch configurations can be set on the Koolmesh app.
| Switch Function | Action | Descriptions |
|---|---|---|
| Push switch | Short press (<1 second) |
- Short press has to be longer than
0.1s, or it will be invalid.| – Turn on/off – Recall a scene
– Turn on only – Exit manual mode
– Turn off only – Do nothing
Double push| – Turn on only – Exit manual mode
– Turn off only – Do nothing
– Recall a scene
Long press (.1 second)| – Dimming
– Colour tuning
– Do nothing
Simulate sensor| /| – Upgrade a normal on/off the motion sensor
to a Bluetooth-controlled motion sensor
Installation
Warnings:
- Installation must be carried out by a qualified engineer in accordance with local regulations.
- Disconnect power supply before installing.
- Ensure environmental conditions are suitable for electronic equipment.
Wire Preparation
Additional Information / Documents
- To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
- Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
- The datasheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensor ->Receiver Nodes
- Regarding Hytronik’s standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
www.HYTRONIK.COM
HBTD8200T/F-20200403-A2
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>