THOMSON WHP6011BT On-Ear Bluetooth Headphones Instruction Manual

**THOMSON WHP6011BT On-Ear Bluetooth Headphones Instruction Manual

**

Thank you for choosing a Thomson product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Controls and displays

1. + button
2. – button
3. ON / OFF
4. Multi-function button (MFB)
5. Status LED
6. Audio input (3.5 mm)
7. Micro-USB connection
8. Microphone

Explanation of warning symbols and notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package contents

• 1x “WHP6011BT” Bluetooth® over-ear stereo headphones
  

• 1x micro-USB charging cable

• 1x 3.5 mm stereo AUX cable

• 1x quick guide

• 1x warning and safety instructions

Safety instructions

• The product is intended for private, noncommercial use only.
• Use the product only for the intended purpose.
• Children should be supervised to ensure that they do not play with the product.
• Do not use the product in areas in which electronic products are not permitted.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
• Do not open the device or continue to operate it if it becomes damaged.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any major shocks.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
• Protect the product from dirt, moisture and overheating and use it in dry environments only.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• Only use the article under moderate climatic conditions.
• As with all electrical products, this device should be kept out of the reach of children.
• Do not operate the product outside the power limits specified in the technical data.
• Do not use the product in a damp environment and avoid splashing water
• While driving a car or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the traffic situation and your surroundings.
• The battery is permanently installed and cannot be removed; dispose of the product as a whole in accordance with the statutory regulations.
• Do not incinerate the battery or the product.
• Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.
• Do not use the product during the charging process!

Warning – rechargeable battery

• Only use suitable charging devices or USB connections to charge the product.
• Do not use defective chargers or USB ports and do not attempt to repair them.
• Do not overcharge the product or allow the battery to completely discharge.
• Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
  • Charge regularly (at least quarterly) during periods of prolonged storage.

Warning – magnets

• This product generates magnetic fields. Persons with a cardiac pacemaker should consult a doctor before using this product, as the pacemaker’s proper function could be affected.
• Do not store bank or similar cards with magnetic strips near the charging box or earphones. The data on the cards could be damaged or completely deleted.

Warning – high volume

• High sound pressure!
• There is a risk of hearing damage.
• To prevent any loss of hearing, avoid listening at loud volumes for prolonged periods.
• Always keep the volume at a sensible level. Loud volumes, even over short periods, can cause hearing loss.
• Using this product limits your perception of ambient noise. For this reason, do not operate any vehicles or machines while using this product.

Switching on/off

Press the ON/OFF button (3) for around 3 seconds until a signal is heard and the LED (5) flashes blue.

To switch off, press the ON/OFF button (3) for around 5 seconds until a signal is heard and the LED (5) flashes red and then goes out.

Note – Automatic switch-off of the headphones
The headphones are equipped with an automatic switch-off mechanism. If there is no connection to your device within 3 minutes, they switch off automatically.

Charging

Fully charge the headphones once before using them for the first time.

1. Switch off the headphones and connect them
   Ensure that the headphones are switched off before charging them.
   Connect the USB charging cable included to the charging socket (7). Connect the free plug on the micro-USB charging cable to a suitable USB charger. To do this, consult the operating instructions for the USB charger you are using.

2. Charging process for the headphones
   The LED (5) lights up solid red during the charging process. Once the charging process is complete, the LED (5) goes out.
   
   It can take up to 3 hours for the battery to be fully charged.

3. Battery capacity
   When the headphone battery capacity is low, the LED (5) flashes red and a short signal is heard

Note
During the charging process, the Bluetooth® connection is automatically disconnected.

Bluetooth® pairing

Note – Pairing

• Make sure that your Bluetooth®-capable device is switched on and that Bluetooth® is activated.
• For more information, please refer to the operating instructions of your device.

The headphones and the device should not be more than 1 metre apart. The shorter the distance, the better.
Switch the headphones on using the ON/OFF button (3).

1. **Check the status of the status LED (5) and the signal

**

  *  **If the LED (5) is flashing alternately and a signal is heard:  

**
Headphones searching for a Bluetooth® connection.

  *  **If the LED (5) is flashing and a signal is heard:  

**
Headphones already paired with a Bluetooth® device.

2. Search using your device for the headphones (only required on the first connection)
    
   Open the Bluetooth® settings on your device and wait until the list of found Bluetooth® devices shows WHP6011BT.
   Select WHP6011BT and wait until the headphones are shown as connected in your device’s Bluetooth® settings.
   
   Note – Bluetooth® password
   Some devices require a password in order to connect to another Bluetooth® device.

   • If your device requests a password to connect to the headphones, enter 0000.

3. Disconnecting the Bluetooth® connection
   Disconnect the headphones via your device’s Bluetooth® settings.

Controls

Note

• Please be aware that your terminal device must support some functions if they are to be used.
• For more information, please refer to the operating instructions of your device.

1. Hands-free function
   It is possible to use the earphones like a hands-free facility for your mobile phone.

2. Make a call
   Dial the number directly via your device to make a call.

3. Accept a call
   Press the multi-function button (4) once to accept an incoming call.

4. Reject a call
   Press and hold the multi-function button (4) for around 2 seconds or use your device to reject an incoming call.

5. End a call
   During the call, press the multi-function button (4) to end the call.

6. Last number redial
   Press the multi-function button (4) twice to redial the last number called.
   
   

7. **Audio playback

Note
Please note that this function is only possible when a Bluetooth® connection is active.
**

1.  **Start playback on your device.**
2.  **Play / Pause**  

Press the multi-function button (4) once to pause or start audio playback.

3.  **Next track**  

Press the + button (1) to skip to the next track.

4.  **Previous track**  

Press the –button (2) to skip to the previous track.

3. **Volume control

**

1.  **Increase volume**  

Press the + button (1) for 2 seconds to increase the volume.
When the maximum volume is reached, a signal is heard.

2.  **Reduce volume**  

Press the – button (2) for 2 seconds to reduce the volume.
Once the minimum volume is reached, a signal is heard.

4. 7.5 Audio playback via an audio cable
   
   As an alternative to the connection via Bluetooth®, you can also connect these headphones using the included AUX cable. To do this, plug one end into the device and the other end into the audio input (6). When the audio cable is inserted, the Bluetooth® connection is automatically disconnected. The headphones now function like cabled headphones.
   

Technical data

Bluetooth headphones|
---|---
Impedance headphones / microphone| 32Ω / < 2.2 kΩ
Frequency headphones / microphone| 20 Hz – 20 kHz / 100 Hz – 10 kHz
Sensitivity headphones / microphone| 98 dB +/- 3 dB
Range| max. 10m
Bluetooth’ technology| v5.0
Profiles| A2DP/AVRCP/HFP/HSP
Transmission frequency| 2.4 – 2.48GHz
Rechargeable battery| Li-Po 3.7 V
Battery capacity| 185 mAh
Power consumption| Max. 190 mA
Charging voltage| max. 5 V USB
Total weight| 135 g
Standby / music / talk time| max. 185 d/ 8h

Care and maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here: www.hama.com

Recycling information

Note on environmental protection:
After the implementation of the European Directives 2012/19/EU and 2006/66/EU in the national legal system, the following applies:

Electrical and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries to the designated public collection points or to the point of sale at the end of their service lives.
Detailed information on this topic is defined in the national laws of the respective country. This presence of the above symbol on the product, operating instructions or package indicates that the product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/ batteries, you are making an important contribution to protecting our environment.

Declaration of Conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00132518] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address:
www.thomson-av-accessories.eu ->00132518 ->Downloads.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>