VIVO Pink Electric Commercial Cotton Candy Machine Instruction Manual
- June 7, 2024
- Vivo
Table of Contents
Pink Electric Commercial Cotton Candy Machine
Pink Electric Commercial Cotton Candy Machine
Instruction Manual
SKU: CANDY-V002
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product. https://vivo-
us.com/products/candy-v002
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com Chat live with an agent!
WARNING: IMPORTANT SAFETY INFORMATION
READ AND FOLLOW ALL SAFETY REQUIREMENTS KEEP THIS MANUAL IN A SAFE AND DRY
PLACE FOR FUTURE REFERENCE
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
· ENSURE THAT SERVICING IS DONE BY PROFESSIONAL SERVICE PERSONNEL, IF
APPLICABLE, TO MINIMIZE PRODUCT DAMAGE OR SAFETY ISSUES.
· ALL MINORS MUST BE SUPERVISED WHILE MACHINE IS IN OPERATION. · THIS
APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WHOSE
PHYSICAL, SENSORY OR MENTAL CAPABILITIES MAY BE DIFFERENT OR REDUCED, OR WHO
LACK EXPERIENCE OR KNOWLEDGE, UNLESS SUCH PERSONS RECEIVE SUPERVISION OR
TRAINING TO OPERATE THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR SAFETY. ·
PLUG THE MACHINE INTO AN ELECTRICAL OUTLET WITH A GROUND LINE.
WARNING: DO NOT USE IF THE CABLE, ELECTRICAL OUTLET OR PLUG IS BROKEN.
WARNING: TO AVOID ELECTRIC SHOCK, DO NOT TOUCH THE PLUG OR ELECTRIC CABLE IF
THEY ARE WET. KEEP THE CABLE AWAY FROM HEAT. DON’T IMMERSE THE CABLE,
ELECTRICAL PLUG OR THE MACHINE INTO WATER OR OTHER LIQUIDS.
WARNING: DO NOT USE DETERGENT WHEN CLEANING. ANY REMAINING DETERGENT RESIDUE
WILL POLLUTE THE CANDY FLOSS. DO NOT LET MACHINE SOAK IN WATER, AS THIS WILL
DAMAGE THE ELECTRICAL COMPONENTS.
CAUTION: FOLLOW INSTRUCTIONS TO PREVENT BURNS. · DO NOT TOUCH THE SURFACE OF
THE HEATING HEAD WHILE THE MACHINE IS ON. · DO NOT PLACE HAND INTO THE PAN TO
REMOVE THE SUGAR WHILE THE MACHINE IS ON. · DO NOT MOVE THE MACHINE WHILE IT
IS ON. · ALLOW THE MACHINE TO COOL BEFORE MOVING IT OR REMOVING EXCESS SUGAR.
ELECTRICAL DATA
2
PRODUCT SPECIFICATIONS
MODEL DIMENSION HEATING POWER MOTOR POWER ELECTRIC VOLTAGE
CANDY-V002 930 x 520 x 860mm
1000 W 80 W 110 V
FREQUENCY
60 Hz
YIELD
1 PER 30 SEC
FUSE
15A 250V (F15)
PACKAGE CONTENTS
A1 (x2) Wheel
A2 (x1) Wheel Leg
A3 (x2) Leg
A4 (x3) Beam
A5 (x6) M5x30 Screw
A6 (x2) M12x70 Screw
A7 (x2) Washer
A8 (x1) Socket Wrench
A9 (x2) Wheel Cover
B1 (x2) Handle Block
B2 (x1) Handle Pipe
B3 (x8) M4x12 Screw
B4 (x8) M5x8 Screw
B5 (x1) Cone Shelf
B6 (x1) Shelf
B7 (x1) Candy Machine
B8 (x4) M5 Nuts
B9 (x4) M5x10 Screw
B10 (x1) Pan
PREPARATION
· After carefully removing the machine from the packing carton, clean the
heating head and the
stainless steel pan with warm, soapy water (do NOT use detergent type
cleaners). When the head is turned on, it will clear the water from the
machine. Make sure to dry the pan completely.
· The cotton candy machine should be placed on a dry, flat stable surface. ·
Make sure all parts are properly installed before plugging in the machine.
NOTE: Due to the operation testings of the machine prior to shipping, some
sugar residue may be remaining.
3
MACHINE STRUCTURE
ASSEMBLY STEPS
STEP 1
Remove all x6 M5x30 screws (A5) from the Beams (A4). Assemble one beam to each
side of wheel leg (A2) using x2 M5x30 screws (A5). Connect Legs (A3) to
assembly using x2 M5x30 screws (A5) through the upper holes. Finish the
assembly as shown by mounting remaining beam (A4) to lower holes in legs (A3)
using x2 M5x30 screws (A5).
STEP 2
Mount both wheels (A1) using the wheel screws (A6) and washers (A7). Tighten
using small end of included socket wrench (A8).
STEP 3
Press both wheel covers (A9) onto wheels.
4
STEP 4
Flip finished cart over and place (B7) machine on top with drawer facing to
the side. Secure with all (B4) M5x8 cart screws.
STEP 5
Press both (B1) handle blocks onto (B2) handle pipe. Secure to (B6) shelf
using four (B9) M5x10 screws and four (B8) M5 nuts. Handle should be facing
up.
STEP 6
Attach (B5, B6) shelves to machine using all (B3) M4x12 screws. NOTE: Be sure
that the shelf with the handle is on the same side as the wheels.
STEP 7
Latch pan (B10) to the top of the machine. Your cotton candy machine is now
ready for use!
5
OPERATING INSTRUCTIONS
STEP 1 Turn on the power switch. Let the machine run for 1-2 minutes to allow
the motor and drive
belt to warm up for best performance. The machine may vibrate while running;
this is normal and will not affect operation.
NOTE: Machine has a built in safety switch (located on front left latch) and
will not turn on if the bowl is not fully mounted. All four latches should
activate the safety switch. Ensure bowl is in place and secure – red light
should be illuminating from the switches.
STEP 2 Turn on the heating switch and allow the head to warm up for 4-5
minutes.
NOTE: To protect candy from debris and prevent the sugar crystals from flying
into the air, we suggest purchasing our bubble shield (CANDY-V003) which is
sold separately.
STEP 3 OPTION A: CANDY FLOSS SUGAR
If using standard candy floss sugar, pour one scoop full of sugar into the
center of the heating head.
OPTION B: HARD CANDY If using hard candy, turn off machine and place hard
candy pieces evenly in the center of the heating head. Break up into smaller
pieces to fit if necessary. Turn machine back on.
NOTE: Only use corn syrup based hard candies with a slightly transparent appearance such as Jolly Rancher and Life Savers. Pressed sugar and other hard candies like Smarties may not melt properly, thus clogging the head.
WARNING: KEEP HANDS CLEAR OF MOVING PARTS TO REDUCE RISK OF INJURY
STEP 4
The candy floss will form after roughly 30 seconds. Use a paper cone, candy stick, or other related object to collect the candy floss. Revolve the object in a circular motion following the pan. Turn the object sideways directly over the heating head and continue twisting the object in order to collect the floss into a ball shape.
STEP 5 To continue making candy floss, repeat steps 3 and 4. To prolong the
service life of the electric
motor, please allow the motor to rest for 20 minutes after working
continuously for an hour.
Turn off the power switch when you are finished. Remove the pan and clean it
with water.
NOTE: If the heating head does not produce candy floss, turn off the power switch and clean the burnt sugar as described in the Cleaning section.
CARE & MAINTENANCE
CLEANING
When finished making candy floss, keep machine hot and running while cleaning
the heating head by slowly pouring a small amount of water into the center.
USE WITH CAUTION: Water will immediately become steam.
6
Keep water spinning through until color inside is closer to the bare aluminum
again. Allow machine to cool, and wipe down head with a damp cloth to clean
off excess sugar. Stainless steel pan may be cleaned with warm soapy water.
If the inside of the head needs to be cleaned, remove the four screws on top,
then remove top plate. If screws are difficult to remove, turn on the machine
and heater for 15-20 seconds to free up the screws.
Allow machine to heat back up for one minute before making more candy floss.
This will help the machine run well and require only minimal cleaning after
each use.
REMOVING BURNT SUGAR
Due to the nature of sugar, it is normal for a small amount to burn inside
even with periodic cleanings. This will not harm the machine or candy floss
produced.
Remove burnt sugar by removing top plate from heating head and allowing
machine to soak in vinegar and then scrubbing clean. An abrasive cleaning pad
(such as a Scotch-Brite pad) may be used for especially hard burns.
CHANGING THE BELT
This package includes a spare belt in case the belt currently installed in the
machine fails.
To access belt: Remove shields from underneath heating head. Each shield is
held in place by three screws. Remove the top cover, which is held in place by
a screw on each side.
TROUBLESHOOTING
WARRANTY
We offer a ONE YEAR warranty for this product. If you have any problems with
the machine, please contact us directly. We have a 30 Day Return Policy.
PROBLEM
POSSIBLE CAUSE & SOLUTION
Heating head spins but does Ensure wires underneath heating head are not cut or frayed. If wires
not heat up.
are not damaged then the temperature sensor may be out.
Machine has no power.
Bowl may not be secured to machine (all four latches should activate the
safety switch). If safety switch is pressed and switches
are on, check if red light is illuminating from switches.
Contact us for further assistance if it is still not working.
Electric cord for machine is lost.
Standard cord used for computers, printers, etc. must be rated 20 AMPS. Cotton candy machine is designed to run on US 110V power.
Head/spinner is off balance. Contact us so that we may send you a
Machine constantly vibrates.
part replacement.
Heating head not turning, motor running.
Ensure belt inside machine has not come loose. If belt has come loose,
reinstall in machine and adjust the belt tension by loosening the 4 motor
screws and repositioning the motor slightly. Replace
belt if broken.
7
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 02/11/2021 REV1.1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within
< 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESOLUTION TIME (within office hrs): 5M 4S
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>