VIVO Portable TV Tripod Instruction Manual
- June 7, 2024
- Vivo
Table of Contents
VIVO Portable TV Tripod Instruction Manual
SKU: STAND-TV55T
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-tv55t
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com
Chat live with an agent!
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Unfold the Tripod Base (A) and tighten the lower knob.
STEP 2
Loosen the upper knob on the Pole of the Tripod Base (A) , adjust the Pole to the desired height, insert the retainer pin, then tighten the upper knob.
STEP 3
Install Mounting Bracket (E) using the M6x50 Carriage Bolts (F) , Metal Washers (I) and M6 Lock Nuts (G). The arrow on the bracket must be pointing up. Tighten with the Wrench (K).
STEP 4
Assemble the VESA Plate (B) to the Mounting Bracket (E) using M6x12 Bolts (J) , Metal Washers (I) , Plastic Washers (H) and M6 Lock Nuts (G).
STEP 5
OPTION A: Small TV
Mount VESA Brackets (C, D) to the back of the TV with 14mm Bolts (M-A or M-B) and M5/M8 Washers (M-F). Tighten with a Phillips screwdriver.
OPTION B: Large or Curved Back TV
Mount VESA Brackets (C, D) to the back of the TV with 30 or 50mm Bolts (M-C, M-D or M-E) , M5/M8 Washers (M-F) and Spacers (M-G, M-H). Tighten with a Phillips screwdriver.
STEP 6
Hang the TV with VESA Brackets (C, D) over the VESA Plate (B) and secure with the pre-installed bolts underneath using a Phillips screwdriver.
Adjust as Desired
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303 AVG. RESOLUTION TIME (within office hrs) : 5M 4S
www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com AVG. RESPONSE TIME (within office hrs) : 1HR 8M
-
* 23% within < 15m- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo- us.com
Documents / Resources
| VIVO
Portable TV
Tripod
[pdf] Instruction Manual
Portable TV Tripod, STAND-TV55T
---|---
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- STAND-TV55T Portable Tripod for 32” to 55” TVs – VIVO - desk solutions, screen mounting, and more