GIMA LETTINO Eeltttrico Per Centri Benessere Electric Beauty Beds User Guide
- June 7, 2024
- GIMA
Table of Contents
- 1 ABOUT THIS MANUAL
- 2 WARNING
- 3 PRECAUTIONS
- 4 APPLICABLE RANGE
- 5 INSTALLATION
- 6 STRUCTURE OF ELECTRIC BEAUTY BED
- 7 OPERATION INSTRUCTION
- 8 TECHNICAL PARAMETERS
- 9 MAINTENANCE
- 10 CIRCUIT SYSTEM CONNECTION DIAGRAM
- 11 TROUBLESHOOTING
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GIMA LETTINO Eletttrico Per Centri Benessere
_ **Electric Beauty Beds User Guide**_
1 ABOUT THIS MANUAL
This manual shall only be used for the reference of operation of this particular model. If the manual is used for other purposes, we will not undertake any according consequences and responsibility. All information of this manual shall be protected by copyright and shall not be copied and translated in any part of this specification without the written consent of manufacturer.
2 WARNING
- Power supply must be cut off when changing electrical components or maintaining and cleaning machines.
- The plug must be plugged into an outlet that is properly installed and grounded, to prevent the risk of fire and electric shock.
- Do not stand on this equipment.
- Do not allow children to play with and place the equipment in a place where children can touch. Please adjust the backrest to the highest position when you leave.
- Please do not place the equipment in wet places such as bathroom to avoid electric shock or other failure; Also keep the controllers away from water.
- Please do not place and operate the equipment in places where is painting/coating or supplying oxygen.
- Unless being monitored or instructed by personnel who can be responsible for their personal safety, the people who have physical obstacles, tactile disorders, mental disorders, lack of experience, common sense or children, are not allowed to use the equipment.
- Please contact distributor, service center or related personal with appropriate skill and experience for repairing if the plug is damaged, in case of any danger.
- Please make sure there is no accessible thing within the stroke during any operation of the beds.
- Operation should be processed by trained professionals.
3 PRECAUTIONS
- The equipment should be used by an experienced person who must be familiar with the product structure, performance and instructions. And make the regular maintenance work.
- Read this manual carefully before installation, operation and adjustment. And please keep it well.
- This product shall not be used for single side or single point loading work.
- Comply with safety operation rules, do not overload the use of products, to ensure that the product safety protection equipment is complete and reliable, eliminates unsafe factors on time.
- Tighten bolts and nuts regularly to avoid failure caused by loose, sliding, vibration and falling parts.
- During the maintenance, the operator shall not disassemble any parts of the bed at will.
- This product is not allowed to operate when it’s with fault. If abnormal phenomenon or abnormal sound is found, it must be stopped for inspection immediately, and work can be resumed after troubleshooting.
- The operator must be familiar with the precautions described in each section of the manual to ensure the safety of person and product.
- This electric beauty bed is equipped with a three-wire power cord. The power cord must be plugged into a three-hole outlet which is properly installed and grounded. This is not only to prevent the risk of electric shock, but also ensure bed work properly.
- Please operate the equipment strict accordance with the warning label pasted to the products.
- While controlling the lifting of the whole bed, the button must be pressed continuously until the bed in a suitable position.
- Please pay attention that the continuous working times should be Max. 2Min. ON ; 18Min. OFF, when operating the motor.
- Maintenance should be processed by trained professionals.
- After each treatment, please use neutral reagent to clear the dust, stains on leather or on wood pieces.
- When adjusting the backrest, seat cushion, footrest or lifting of the whole bed by hand controller or installed foot controller, please keep your hands, feet and head away from the position. (Please see right picture)
4 APPLICABLE RANGE
These electric beauty beds are suitable for beauty, massage and manicure treatment.
5 INSTALLATION
- Put the bed to a proper location, according to the overall layout, the daylighting or artificial lightings and operation condition of the salon’s or the home. And keep it in the clean, dry and cool environment.
- Open the packing carton to check if the bed is intact and whether the accessories or spares are complete. Please contact distributor or us if there’s any problem.
- installation Place the bed to the proper position. Please note that it is unnecessary to install extra screw on the floor to fasten the bed, because the original design has taken the stability performance into consideration. But please ensure the bed ls placed on a firm and flat ground, so as to prevent any accident. if the bed rotates or slant due to rough ground, please adjust the four pieces rubber feet (10×30) and nuts (10) fasten on the chassis by hexagon open-end wrench, so as to ensure the bed is stable.
- Connect the plug with power supply properly. (Details as shown below)
6 STRUCTURE OF ELECTRIC BEAUTY BED
- This beauty bed consists of control box, motor, hardware, plastic parts and leather. Among them, the control box is controlling the operation of the motors and the hand controller.
- This beauty bed includes angle adjustment of the backrest, seat cushion, footrest, and lifting adjustment of the whole bed which is an overall and integral structure. (Details as shown below)
- angle adjustment of the backrest
- lifting adjustment of the whole bed
- angle adjustment of the seat inclination (manual adjustment)
- footrest angle adjustment (manual adjustment)
7 OPERATION INSTRUCTION
1. Standard Configuration (Hand controller)
2. Optional Configuration (Foot controller)
8 TECHNICAL PARAMETERS
9 MAINTENANCE
- After every treatment, please only use neutral solution to clear the the dust, stains on leather, metal part or plastic cover. Disinfecting solution like alcohol, acid or alkaline solution are forbidden. Th is is to prevent the lifetime of leather and plastic cover from being shorten.
- Please lubricate the moving parts regularly (once a year).
10 CIRCUIT SYSTEM CONNECTION DIAGRAM
11 TROUBLESHOOTING
If problem is still not solved after above operation, please contact maintenance center or supplier to solve it.
Disposal: The product must not be disposed of along with other domestic waste. The users must dispose of this equipment by bringing it to a specific recycling point for electric and electronic equipment.
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
[REF] 2219B (28008 – 28009)
Manufacturer
SILVERFOX CORPORATION LIMITED
No. 18, 1st TongLe Road, TangXia Town, Pengjiang District,
JiangMen City, GuangDong Province, China
Made in China
Imported by
Gima S.p.A.
Via Marconi, 1 – 20060 Gessate (MI) Italy
gima@gimaitaly.com –
export@gimaitaly.com
www.gimaitaly.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>