GIMA OT103 Overbed Table Datasheet
- June 2, 2024
- GIMA
Table of Contents
GIMA OT103 Overbed Table
Specifications:
- Weight Limitation: 25 kg (55 lbs)
- Materials: Medium density fiberboard (Table top), Steel Pipe (Table frame), Fastener (Screw, Hand crank), Plastic (Tube plug, Castor)
- Intended Use: Movable table top surface for reading, eating, or keeping personal items within easy reach
Product Usage Instructions
Safety:
Check all parts for shipping damage before use. Do not use if damage is noted. Contact carrier or dealer for further instructions.
Weight Limitation: The maximum static loading limitation is 25 kg (55 lbs). Ensure weight is evenly distributed.
Installation:
Always use caution when installing the column assembly. Avoid touching sharp edges before completion of installation to prevent injury or damage.
Perform installation operations on flat ground. Follow the installation steps provided in the user manual.
Product Use:
- Adjust the tabletop height using the hand crank as shown in Figure 1.
- Only use the table indoors within close proximity of caregivers.
- Avoid overloading the table to prevent breakage and potential injury or property damage.
- Do not use the table for purposes other than its intended use.
FAQ
Q: Can I use accessories from other manufacturers with this product?
A: No, it is recommended to use only IDEAL accessories designed for this product to ensure safety and proper functionality.
Q: What is the maximum weight the table can hold?
A: The weight limitation for this product is 25 kg (55 lbs). Ensure weight is evenly distributed over the table top.
Q: Can I use this table for purposes other than those listed in the manual?
A: No, this table is designed for specific uses such as reading, eating, and keeping personal items within easy reach. Do not repurpose for other uses to prevent accidents or damage.
OVERBED TABLE – Thank you for choosing this Overbed Table – L100.
General
Symbols
Signal words are used in this manual and apply to hazards or unsafe practices
which could result in personal injury or property damage. See the information
below for definitions of the signal words.
-
Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
-
Important
Indicates a hazardous situation that could result in damage to property if it is not avoided. -
Gives useful tips, recommendations and information for efficient, trouble-free use.
Safety
Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use. Contact carrier or dealer for further instruction.
Weight Limitation
The horizontal and vertical static loading limitation of the OT103 is 25 kg
(55 lbs).
General Warnings
DO NOT use this product or any available optional equipment without first
completely reading and understanding these instructions and any additional
instructional material such as owner’s manuals, service manuals or instruction
sheets supplied with this product or optional equipment. If you are unable to
understand the warnings, cautions or instructions, contact a healthcare
professional, dealer or technical personnel before attempting to use this
equipment – otherwise, injury or damage may occur. ALWAYS check the overbed
table for proper tightness before using. THE technical improvements of
products will be compiled into new version of user manual without notice.
Please in kind prevail if the appearance and color of products are changed.
Accessories Warning
IDEAL products are specifically designed and manufactured for use in
conjunction with IDEAL accessories. Accessories designed by other
manufacturers have not been tested and are not recommended for use with IDEAL
products.
Installation Warning
ALWAYS use extreme caution when installing the column assembly, because it is
with a sharp in the end of horizontal tub, please don’t touch the sharp before
completion of installation, otherwise injury or damage might occur. After any
adjustments, repair or service and before use, make sure that all attaching
component parts are secure.
Intended use
The overbed table as a kind of furniture is designed for use as a movable
table top surface for reading, eating, or keeping small personal items such as
glasses, telephone, or books within easy reach.
Parts (Packing) List
Assembling the Overbed Table
- Open end of box and then slide contents out of box.
- Collect base with castors, lifting column, table top and its support, hardware, hand crank and user manual.
- When installing, please perform installation operations on flat ground.
- Installation can be completed in just 4 easy steps.
The overbed table is mainly composed of the following materials:
- Medium density fiberboard (Table top)
- Steel Pipe (Table frame)
- Fastener (Screw, Hand crank)
- Plastic (Tube plug, Castor)
Using the Overbed Table
Not only is this overbed table easy to install, it is also easy for the user to use. Adjust the tabletop to the user’s desired height by turning the hand crank as FIGURE 1.
- This table is designed for use as a movable patient/resident table top surface for reading, eating, or keeping small personal items such as glasses, telephone, or books within easy reach.
- This table is designed for indoor use ONLY within close proximity of skilled caregivers. It is not designed to hold electrical items (such as televisions, computer monitors, coffee pots, etc.) and should not be used near open flames and excessive heat.
- Maximum weight limitation for this product is 25 kg (55 lbs); weight should be evenly distributed over the table top surface to help maintain a stable condition.
- DO NOT overload the table as that could result in breakage, as well as damage to property and/or serious injury.
- Use ONLY as directed for its intended use. This product should NOT be used: as a sleep surface; as a walker or mobility aid to assist a person in walking, sitting down or standing up; to prevent or brace a person’s fall; or to help transport persons or items.
Misure (unità: mm)
Parameters
REF
OT103 (GIMA 27487)
Imported by:
Gima S.p.A.
Via Marconi, 1 – 20060 Gessate (MI) Italy gima@gimaitaly.com –
export@gimaitaly.com
www.gimaitaly.com
Made in China
Manufactured by:
Suzhou Ideal Medical Co., Ltd.
No. 88 Huachi Street,
Suzhou Industrial Park, Suzhou (215000), Jiangsu, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>