VIVO Crank 55″ x 24″ Height Adjustable Desk Instruction Manual
- June 7, 2024
- Vivo
Table of Contents
Crank 55″ x 24″ Height Adjustable Desk – Black
Instruction Manual
SKU: DESK-M55TB
Scan the QR code
with your mobile device or follow the link for helpful videos and
specifications related to this product.
https://vivo-us.com/products/desk-m55tb
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com www.vivo-us.com 309-278-5303
Chat live with an agent!
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x2) B (x1) C (x1)
D (x1)
Lifting Column Sync Rod Upper Crossbar Lower Crossbar
E (x1) F (x1) S-A (x4)
S-B (x6)
Desktop Crank M6x12mm M6x35mm
S-C (x4) S-D (x9) S-E (x6) S-F
(x1)
M5x60mm Pad D6 Washer Allen Wrench
TOOLS NEEDED
Phillips Screwdriver
Level
WARNING
PINCH POINT
DO NOT place hands on or near support bars. Moving parts can crush and cut. Pinch points are created during lifting and lowering the work surface. Failure to follow these instructions may result in serious personal injury.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
2
ASSEMBLY STEPS
STEP 1
Stand up the lifting columns ( A ) and insert the sync rod ( B ) into the socket on each column. Use the crank ( F ) to align columns if needed.
STEP 2
Assemble the upper crossbar ( C ) to the top of the columns using the M5x60mm bolts ( S-C ) and the lower crossbar ( D ) to the back using M6x12mm bolts ( S-A ). Tighten all bolts using the Allen wrench ( S-F ).
3
STEP 3
Apply the pads ( S-D ) to the top of the assembled frame.
STEP 4
Place the desktop ( E ) on top of the frame. Secure using the M6x35mm bolts ( S-B ) with D6 washers ( S-E ), and tighten with a Phillips screwdriver.
4
STEP 5
Insert the crank ( F ) into the hex socket of the lifting column.
1
Figure 1: Turn the crank to raise or lower the desk.
2
Figure 2: Store the crank in the rear of the desk support bracket on the column as shown.
3
Figure 3: Turn the
foot pads to adjust the desk level.
4
Figure 4: Use a bubble level to ensure the desk is sitting perfectly level.
5
STEP 5 (Continued)
6
CAUTION!
Do not exceed desk weight limit.
Keep area of vertical motion free of obstacles.
Keep weight on desk balanced for correct operation and longer life of components.
Leave enough slack in cables to allow for full range of vertical motion.
Failure to follow these instructions may result in property damage and/or personal injury.
7
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 02/02/2021
REV2
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESOLUTION TIME (within office hrs): 5M 4S
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- DESK-M55TBCrank Height Adjustable 55” Desk – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>