VIVO Light Wood / White 44″ x 24″ Electric Desk Instruction Manual
- June 7, 2024
- Vivo
Table of Contents
Light Wood / White 44″ x 24″Electric Desk
Instruction Manual
SKU: DESK-E144C
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/desk-e144c
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
[email protected]
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
- DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
- DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
- NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR SELLER TO REPLACE DAMAGED PARTS.
- NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE MADE CONTACT WITH LIQUIDS.
- ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
- OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING
DO NOT place hands on or near support bars. Moving parts can crush and cut.
Pinch points are created during lifting and lowering the worksurface.
Failure to follow these instructions may result in serious personal injury.
ASSEMBLY STEPS
STEP 1
Assemble the crossbar (6) to the legs (8, 9) using M8x47 bolts (A) and tighten
with the 5mm Allen wrench (E).
STEP 2
Place the feet (4) on the legs as shown, then insert and tighten M6x35
bolts (C) using the 5mm Allen wrench (E). Screw the foot pads (G) into the
feet.
STEP 3
Assemble the side brackets (5) to the legs using M6x10 bolts (B) and tighten
with the 4mm Allen wrench (E). Insert the anti-vibration pads (H) into the
desktop mounting holes in the crossbar and side brackets.
STEP 4
Insert the sync rod (7) into the leg (9). Loosen the knob on the sync rod,
then extend the rod onto the motor leg (8) and tighten the knob. Tighten the
set screw on the end of the sync rod using the 2mm Allen wrench (E).
STEP 5
Assemble the desktop halves (11) using the connectors (10) with M5x16 screws
(D) and a Phillips screwdriver.
STEP 6
Hang the cable tray (3) over the crossbar (6), opposite from the sync rod (7),
then carefully place the assembled frame upside down on the desktop (11).
Secure the frame to the desktop using M5x16 screws (D) and a Phillips
screwdriver.
STEP 7
Mount the control panel (1) to the desktop (11) using M5x16 screws (D) with a
Phillips screwdriver. Connect the AC adapter (2) and motor to the control
panel. Organize cables using the cable clips (F).
STEP 8
Carefully turn the desk right side up and connect the AC adapter (2) to a wall
outlet. If necessary, adjust foot pads (G) to level the desk. The desk is now
ready for use. Please refer to the Controller User Guide for operating
instructions.
CAUTION!
| Do not exceed desk weight limit.
---|---
| Keep area of vertical motion free of obstacles.
| Keep weight on desk balanced for correct operation
and longer life of components.
| Leave enough slack in cables to allow for full range
of vertical motion.
Failure to follow these instructions may result in property damage and/or personal injury.
**Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us**
LAST UPDATED: 02/02/2021
REV2
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team
can offer immediate assistance with rapid response times. If any parts are
received damaged or defective, please contact us. We are happy to replace
parts to ensure you have a fully functioning product.
[email protected]
www.vivo-us.com
Chat live with an agent!
309-278-5303
AVG. RESPONSE TIME (within office hrs): 1 HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr – 92% within < 3hr
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESOLUTION TIME (within office hrs): 5M 4S
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more