Westinghouse Dishwasher User Manual

USER MANUAL

DISHWASHER
WSF6608
Applicable to WSF6608 dishwashers
with serial numbers greater than 82100000

CONGRATULATIONS

Congratulations and thank you for choosing our product. We are sure you will find your new appliance a pleasure to use and a great asset to your cooking. Before you use the appliance, we recommend you read through the whole user manual which provides a description of the product and its functions. To make the best use of your new appliance, it is important that the appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. This appliance complies with the requirements of Australian Standard AS/NZ 60335 .2 .5. Conditions of use

Conditions of use This appliance is intended to be used in households and similar applications such as:

• Staff kitchen areas in shops, offices, and other working environments
• Farmhouses
• By clients in hotels, motels, and other residential type environments
• Bed and breakfast type environments.

Record model and serial number here:
Model: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

** ENVIRONMENTAL TIPS**
Important – check for any damage or marks
If you find the dishwasher is damaged or marked, you must report it within 7 days if you wish to claim for damage/ marks under the manufacturers’ warranty. This does not affect your statutory rights.

IMPORTANT INFORMATION THAT MAY IMPACT YOUR MANUFACTURER’S WARRANTY
Adherence to the directions for use in this manual is extremely important for health and safety. Failure to strictly adhere to the requirements in this manual may result in personal injury, property damage and affect your ability to make a claim under the Westinghouse manufacturer’s warranty provided with your product. Products must be used, installed, and operated in accordance with this manual.  You may not be able to claim on the Westinghouse manufacturer’s warranty in the event that your product fault is due to failure to adhere to this manual.

ENVIRONMENTAL TIPS
Information on disposal for users

• Most of the packaging materials are recyclable.
  Please dispose of those materials through your local recycling depot or by placing them in appropriate collection containers

• If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.

IMPORTANT SAFETY INSTRUCTIONS

These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance. Please read the user manual carefully and store in a handy place for later reference. Pass the user manual on to possible new owners of the appliance. If you need assistance, contact your Customer Care Department. The manufacturer will not accept liability, should these instructions or any other safety instructions incorporated in this book be ignored. The symbols you will see in this booklet have these meanings:

WARNING
This symbol indicates information concerning your personal safety.
TIPS AND INFORMATION
This symbol indicates tips and information about the use of the appliance.
ENVIRONMENTAL TIPS
This symbol indicates tips and information about the economical and ecological use of the appliance.

Recycling

• Certain components and the packaging of your machine have been produced from recyclable materials.
• Plastic parts are marked with international abbreviations: (>PE< , >PS< , >POM<, >PP<, . . . .)
• Cardboard parts have been produced from recycled paper and they should be disposed of into waste paper collection containers for recycling.
• These materials should not be disposed of into garbage bins. They should be delivered to recycling centres instead.
• Contact relevant centres in order to obtain information on methods and points of disposal.

Safety Information

When you take delivery of your machine

• Check for any damage to your machine or to its packaging. Never start a damaged machine, make sure to contact an authorized technician.
• Unwrap the packaging materials as indicated and dispose of them in accordance with the rules.

The points to pay attention to during machine installation

• Choose a suitable, safe, and level location to install your machine.
• Carry out the installation and connection of your machine by following the instructions.
• This machine should be installed and repaired by an authorized technician only.
• Only original spare parts should be used with the machine.
• Before commencing the dishwasher installation, be sure that the machine is unplugged.
• Check whether the indoor electrical fuse system is connected according to the regulations.
• Make sure that the electrical information on the rating plate is the same as the power supply. If not, contact an electrician.
• Always use a correctly installed shockproof socket.
• Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre, or similarly qualified persons in order to avoid a hazard.
• Pay special attention and make sure that the machine does not crush the power cord.
• Never use an extension cord or multiple sockets to make a connection. The plug should be easily accessible after the machine has been installed.
• After installing the machine, run it unloaded for the first time.

In daily use

• Do not stand, sit or place a load on the open door of the dishwasher, it may fall over.
• Only use detergents and rinse aids which are produced specifically for dishwashers. Otherwise, Electrolux does not take any responsibility for any damage that might occur to your machine.

WARNING
The water in the machine’s washing section is not drinking water, do not drink it.

• Do not use water spray and steam to clean the appliance.
• Due to danger of explosion, do not put into the machine’s washing section any chemical agents such as solvents.
• Check whether plastic items are heat-resistant before washing them in the machine.
• Do not put into your machine those items which are not suitable for dishwashing. Also, do not overload the basket.

SAFETY INFORMATION AND RECOMMENDATIONS

• The machine door should not be opened while the machine is in operation, to avoid the risk of hot water spraying out. A safety device ensures that the machine stops if the door is opened.

WARNING

Do not leave your dishwasher’s door open, this may lead to accidents and injury.

WARNING
RISK OF INJURY OR PERMANENT DISABILITY
Place knives and other sharp-ended objects in the cutlery basket in the point- down position.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

For your children’s safety

• After removing the machine’s packaging, make sure that the packaging material is out of reach of children.
• Do not allow children to play with or start the machine.
• Keep your children away from detergents and rinse aids.
• Keep children away from the machine while it is open because there may still be residues of cleaning substances inside the machine.
• Be sure that your old machine does not pose any threat to children. Remove the dishwasher door lock and power supply cord.

In case of malfunctioning

• Any malfunction in the machine should be repaired by qualified persons. Any repair work performed by anyone other than the authorized service personnel will cause your machine to be left outside the scope of a warranty.
• Prior to any repair work on the machine, be sure to unplug the dishwasher from the power supply. Do not pull by the cable when unplugging. Make sure to turn off the water tap.

Recommendations

• For energy and water saving, remove coarse residues on your dishes before placing the dishes into the machine. Start your machine after having fully loaded it .
• Use the pre-wash program only whenever necessary.
• Place items such as bowls, glasses, and pots into the machine face down.

Items not suitable for dishwashing:

• Cigarette ashes, candle leftovers, polish, paint, chemical substances, iron-alloy materials;
• Forks, spoons and knives with wooden or bone, ivory or nacre-coated handles; glued items, items soiled with abrasive, acidic, or base chemicals;
• Plastic items that are not heat-resistant, copper or tin-coated containers;
• Aluminum and silver objects (they may discolor, become dull);
• Certain delicate glass types, porcelains with ornamental printed patterns (may fade even after the first wash); certain crystal items (may lose their transparency over time), laminated cutlery that is not heat-resistant, lead crystal glasses, cutting boards, items manufactured with synthetic fiber;
• Absorbent items such as sponges or kitchen rags are not suitable for dishwashing.

WARNING
Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent compartment is empty after completion of the wash cycle.

DESCRIPTION OF YOUR APPLIANCE

TECHNICAL SPECIFICATIONS

Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . .15 place settings
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . .  . . . . . . . . . . .850 mm
Height (without worktop) . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . .820* mm
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . . . 598 mm
Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .. . . . . . . . . . . . . . . . 598 mm
Net weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . 56 kg
Electricity input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. . . . . .. . . .220-240 V, 50 Hz
Total power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . .1900 W
Heating power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1800 W
Pump power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100W
Drain pump power . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . . . . . 30 W
Water supply pressure . . . . . . . . 0 .03 MPa (0,3 bar) – 1 MPa (10 bar)
Water supply temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . .5 – 60°C
Current . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 A

• Electrolux reserves the right to amend design and technical specifications .
• Do not use this appliance with power and temperature specifications different to those indicated .
• Do not change the specification of this appliance .

• with counterweight and insulation removed

1. Power button
   When pressed on, the machine is energized and the power light illuminates.

2. Option button rinse+ / dry+
   You can add extra rinsing or drying functions for the selected program by using this option.
   Once you select rinse+ function, the light for extra rinsing illuminates, washing-rinsing time will be added into the selected program to ensure that your dishes will be cleaner. Once you select dry+ function, the light for extra drying illuminates, extra heating, and drying time will be added into the selected program to be sure that your dishes will be drier.

3. Hygiene button
   By using this option, washing temperature and periods during respective programs may be changed, which ensures more hygienic washing.

4. Tablet button
   Use this option when using combined detergent that contains rinse aid and extra functions.

5. Half load + button
   Using the half load+ function, three sections for washing can be selected; lower basket, upper basket, and both baskets.
   If you have a small number of dishes in your machine to wash in both baskets, press the half load+ button and select the position in which both lights are illuminated. If you have dishes only in the upper basket, press the halfload+ button and select the position in which the upper light is illuminated. Washing occurs only on the upper basket of your machine.
   No dishes should be placed in the lower basket while using this option. If you have dishes only in the lower basket, press the half load+ button and select the position in which the lower light is illuminated.
   Washing occurs only on the lower basket of your machine. In using this option, make sure that there are no dishes in the upper basket.
   NOTE: If you have used this option on the last washing program, this option will remain active also on the next washing program. If you do not want to use this option on the newly selected washing program, press the selected feature button again, and check that the light on the button goes off.

6. Door handle
   The door handle is used to open/close the door of your machine.

7. Program button
   With the program button, you can select a suitable program for your dishes.

8. Start/Pause button
   The Start/Pause button will start the selected programIn the Pause condition while the wash indicator light is on, Start/Pause LED will blink.

9. Rinse aid/power indicators
   When the rinse aid light illuminates, fill in rinse aid chamber. The power light indicates power is available to the appliance.
   NOTE: If you have used an extra option on the last washing program, this feature will remain active also on the next washing program. To deselect an option on the newly selected washing program, press the selected option button again, and check that the indicator light on the button goes off.

10. Progress indicator Lights
    Program status can be monitored via the progress indicator lights on control panel:
    ♦ Wash
    ♦ Rinse
    ♦ Dry
    ♦ End

11. Time indicator and delay display
    The time indicator displays the program time and time remaining for the program.
    In addition, you can delay the start of the program by pressing the “+” and “-” buttons before the program is commenced. The delay function is indicated by the letter “H” followed by the number of hours selected.

If you want to change the delay time, you can reset it by pressing START/PAUSE and then using the “+” and “–” buttons to select the new delay time, then press START/ PAUSE to activate.

Child Lock Operation
In order to activate child lock, press “+” and “–” buttons simultaneously for 3 seconds. At this time, “CL” appears for 2 seconds on remaining time indicator. To deactivate child lock, press “+” and “–” buttons again simultaneously for 3 seconds. “CL” will blink once.

QUICK START GUIDE

Switching on the machine

Progress indicator
You can follow the program flow using the progress indicator lights located on the control panel.

Changing a program
If you would like to change programs while a washing program is on.

Cancelling a program
If you want to cancel current program for any reason.

INSTALLING THE MACHINE

Positioning the machine

When considering the location for the dishwasher, ensure that there is adequate space to enable loading and unloading of the dishes.

• Do not put your machine in any location where the ambient temperature can fall below 5°C.
• Before positioning, take the machine out of its packaging by following the warnings located on the package.
• Position the machine close to a water tap and drain. You need to postion your machine, taking into consideration that its connections will not be altered once they are made.
• Do not grip the machine by its door or panel in order to move it.
• Take care to leave a certain clearance from all sides of the machine so that you can comfortably move it back and forth during cleaning.
• Make sure that the water inlet and outlet hoses do not get squeezed while positioning the machine. Also, make sure that the machine does not stand on the electrical cable. Adjust the machine’s feet so that it is level and stable. Proper positioning of the machine ensures problem-free opening and closing of its door.
• If the door of your machine does not close properly, check if the machine is stable on the floor; if not, adjust the feet and ensure it is level and stable.

Water connection

Ensure that the indoor plumbing is suitable for installing a dishwasher and complies with AS/NZS 3500 .1. Also, we recommend that you fit a filter at the entrance of your place or apartment so as to avoid any damage to your machine because of any contamination (sand, clay, rust etc) that might be occasionally carried in through the main’s water supply or the indoor plumbing, and to avoid problems of staining and formation of deposits after washing.

Water inlet hose

Do not use the water inlet hose of your old machine, you must use the new water inlet hose supplied with your machine. Before connecting the water inlet hose to the water tap, ensure clean water is flowing from the tap before making the connection. Connect the water inlet hose directly to the water inlet tap. The pressure supplied by the tap should be at a minimum of 0 .03 MPa and at a maximum of 1 MPa. If the water pressure is above 1 MPa, a pressure-relief valve should be installed.

WARNING
Only turn the locking nut to secure hose – do not turn the hose.

• The first time you use the appliance, make sure that there is no leakage.
• The water inlet hose has a safety valve and a sheath with an inner mains cable. After the connections are made, the tap should be turned on fully and checked for water tightness. For the safety of your machine, make sure to always turn off the water inlet tap after each wash program is finished.

WARNING

NOTE: Aquastop inlet hose has components using 240V. Do not cut Aquastop inlet hose. Do not let it get folded, twisted, kinked or crushed.

WARNING

NOTE: A water tempering valve is required if the water temperature is over 60°C.

CAUTION

Always use new hoses when you connect the appliance to the water mains. Old hoses must not be used. The water inlet hose must be examined at an interval of twelve months for deterioration and replaced if necessary. In order to pass the safety valve through the kitchen cabinets, an opening of at least 45mm x 90mm is needed.

Water drain hose

If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane. If you do not remove the entire membrane, the remaining food can cause blockage in the drain hose spigot. Ensure a hose clamp is used to secure the hose to the spigot.

Water drain hose

The water drain hose can be connected either directly to the water drain hole or to the sink outlet spigot. Using a hose hook (if available), the water can be drained directly into the sink by positioning the hose hook over the edge of the sink.

This connection should be at a minimum of 50cm and at a maximum of 110cm above the base of the dishwasher.

WARNING
Maximum drain hose length is 4m. Longer hose length will prevent correct draining, and result in poor wash performance.

WARNING

Electrical Connection

The plug of your machine should be connected to an earthed outlet that supplies suitable voltage and current. If there is no earthing installation, have a competent electrician carry out an earthing installation. In case of usage without earthing installed, our company will not be responsible for any loss of usage that might occur. The indoor fuse current value should be 10-16 A. Your machine is designed for 220-240 V . The machine should not be plugged in during installation.

• Always use the molded plug supplied with your machine.
• Running in low voltage will cause a decline in washing quality.
• The machine’s electrical cable should be replaced by an authorized service or an authorized electrician only. Failure to do so may lead to accidents.
• For safety purposes, always make sure to disconnect the plug when a wash program is finished.
• In order not to cause an electric shock, do not unplug when your hands are wet.
• When disconnecting your machine from the mains supply, always pull from the plug. Never pull the cord itself.

Fitting the machine undercounter

If you wish to fit your machine under-counter, check whether you have sufficient space under your countertop and whether the wiring-plumbing is suitable to do so .

1. To ensure the stability of the dishwasher for an under-bench installation, if the under-bench dimension is greater than 820mm, any gap between the dishwasher and the underside of the benchtop should be bridged with a packing piece. This may be achieved by wedging a piece of timber between the dishwasher and the benchtop as shown

2. If required, remove the worktop as shown in the illustration.

3. To remove the worktop, remove the screws that hold the worktop which is located at the rear of the machine; then push the front panel 1 cm from the front towards the rear and lift it.
   

4. Adjust the machine feet according to the slope of the floor.

5. Fit your machine by pushing it under-counter without letting the hoses get crushed or bent.

WARNING
After removal of the worktop, ensure the opening for the dishwasher is according to the following dimensions.

PREPARING THE MACHINE FOR USE

Prior to using the machine for the first time

• Check whether the electricity and water supply specifications match the values indicated by the installation instructions for the machine.
• Remove all packaging materials inside the machine.
• Fill the rinse aid compartment.

Detergent usage

Use a detergent specifically designed for use in domestic dishwashers. You can find powder, gel, and tablet detergents in the market that have been designed for household dishwashers. Detergent should be put into the compartment prior to starting the machine. Keep your detergents in cool, dry places out of reach of your children. Do not fill detergent into the detergent compartment more than required; otherwise, it may etch your glasses as well as leaving undissolved detergent in the dishwasher. Should you need more information concerning the detergent you use, contact detergent manufacturers directly. Filling the detergent compartment Push the latch to open the detergent container as shown in the image.

The Detergent pod has level lines inside. It is possible to measure the right detergent amount using these lines.

The detergent pod can take a maximum of 40cm3 detergent.
Open the dishwasher detergent pod and pour 25cm3 if your dishes are heavily soiled or 15cm3 if they are less soiled.
You may have to add more detergent into your machine, depending on the degree of soil and the water hardness in your area.

If your dishes are from the previous day and there is dried food waste on them, or if you have fully loaded the dishwasher, pour 5cm 3 detergent onto the base of the door and start your machine.

Combined detergent

Detergent manufacturers also produce combined detergents called “2 in 1”, “3 in 1” or “5 in 1” etc . “2 in 1” detergents contain detergent or rinse aid. When using “2 in 1” detergent make sure to check the specifications of the tablet. Other tablet detergents contain detergent + rinse aid + various extra functions/additives . Generally, combined detergents produce acceptable results under certain usage conditions only. These detergents contain rinse aid in preset amounts. Points to consider when using these types of products:

• Always make sure to check the specifications of the detergent you will use or whether or not it is a combined detergent.
• Check if the detergent used is appropriate for the hardness of mains water.
• Observe the instructions on the packaging when using such products.
• If detergents are in the form of tablets, never put them into the interior section or the cutlery basket of the dishwasher. Always put the tablets into the detergent compartment in the detergent dispenser.
• Tablets produce good results for certain types of usage only. If you are using this type of detergent, you need to contact the manufacturer and find out about the suitable conditions of use.
• When the conditions of use of such products and the machine settings are appropriate, they ensure savings in rinse aid consumption.
• Contact the detergent manufacturers if you are not obtaining good wash results (if your dishes have limescale and stay wet) after having used 2 in 1 or 3 in 1 detergent. The scope of warranty for your machine does not cover any complaints caused by the use of these types of detergents. Recommended usage: If you want to obtain better results while using combined detergents, add rinse aid into your machine and the rinse aid setting to the lowest position. The solubility of the tablet detergents produced by different companies can vary depending on the temperature and time. Therefore, it is not recommended to use these detergents in short programs. It is more suitable to use powder detergents and rinse aid in short programs.

WARNING

Should any problem, which you have not encountered before, occur with the use of these types of detergents, contact the detergent manufacturers directly.

PREPARING THE MACHINE FOR USE

When you stop using combined detergents

• Fill the rinse aid compartment.
• Select a suitable rinse aid setting.

Filling with rinse aid and setting

To fill the rinse aid compartment, open the rinse-aid compartment cap.

Fill the compartment with rinse aid until MAX level and then close the cap.
Be careful not to overfill the rinse aid compartment and wipe up any spills.

In order to set rinse aid level, follow below steps:
Push the program (button 1 shown above) and hold it down.
Turn on the machine (button 2).
Hold down the program button (1) until “rA” disappears from the display.
The machine will display the last setting.
Set the level by pushing the “+” and “-” buttons (3).
Switch off the machine to save the setting.
The factory setting is “4”.
If the dishes are not drying properly or are spotted, increase the rinse-aid level. If blue stains form on your dishes, decrease the rinse-aid level.

TIPS AND INFORMATION
Only use rinse aid suitable for automatic dishwashers. As rinse aid residues left as a result of overflowing will create extremely high amounts of foam and reduce the washing performance, remove the excess amount of rinse aid by wiping it with a cloth. Remove all excess rinse aid if spilled while filling.

LOADING YOUR DISHWASHER

Correctly loaded dishes will result in the best energy consumption, washing, and drying performance. There are two separate baskets for you to load your dishes into your machine. You can load into the lower basket round and deep items as pots with long handles, pot lids, plates, salad plates, and cutlery sets.

The upper basket has been designed for tea plates, dessert plates, salad bowls, cups, and glasses. When placing long-stem glasses and goblets, lean them against the basket edge, rack, or glass support wire and not against other items. Do not lean long glasses against one another if they are unsupported, they may break. It is more appropriate to locate the thin narrow parts into the middle sections of baskets. You can place spoons among the other cutlery sets in order to prevent them from sticking to one another. You are recommended to use the cutlery grid in order to obtain the best result. To avoid any possible injuries, always place such long handles and sharp-pointed items such as serving forks, bread knives, etc . with their sharp points facing down or horizontally on the baskets.

TIPS AND INFORMATION

Ensure the position of the dishware does not prevent the upper or lower spray arm from turning.

Top basket cup rack

These racks are designed to increase the capacity of the top basket. You can place your glasses and cups on the racks. You can adjust the height of these racks. Thanks to this feature, you can place different sizes of glasses under these racks. The cup racks can be adjusted to 3 height positions. In addition, you can place long forks, knives, and spoons horizontally, so that they do not block the rotation of the spray arm.

Top basket folding supports

Foldable tines (or prongs) on the upper basket are designed to let you place big items easier such as pots, pans, etc. If required, each set of tines can be folded separately, or all of them can be folded and larger spaces can be obtained. You can use foldable tines in the upright position, or by folding down.

Top basket height adjustment while it is full

The basket height adjustment mechanism on the top basket of your machine is designed to let you adjust the height of your top basket (refer to diagram 1 ) upwards or (refer to diagram 2 ) downwards, without removing it from your machine when it is full, to create more space at the top or bottom area of your machine as needed. The basket of your machine is set to the upper position in factory settings.
In order to raise your basket, hold it from both sides and pull it upwards. In order to lower it, hold it from both sides again, pull upwards then lower carefully. Make sure that both sides are in the same position (up or down).

LOADING YOUR DISHWASHER

Upper Cutlery Basket
The upper cutlery basket is designed for you to place forks, spoons and knives, ladles, and small crockery.

Because it can easily be taken out of the machine, it allows your dishes to be taken out of the machine along with the basket after washing.
Cutlery and dishes to be carried together to another location

The upper cutlery basket is composed of two pieces. If you need to make space for the dishes in the upper basket, you can take out the left or right part of the upper cutlery basket in order to obtain more space.

WARNING

The upper cutlery basket must then be moved together with the upper basket.

WARNING

Knives and other sharp objects must be placed horizontally in the cutlery basket.

LOADING YOUR DISHWASHER

Lower basket folding racks

Folding tines (prongs) consisting of four parts that are located on the lower basket of your machine are designed to let you place big items easier such as pots, pans, etc . If required, each part can be folded separately, or all of them can be folded and larger spaces can be obtained. You can use folding tines (prongs) in the upright position, or by folding down.

Alternate cutlery basket
An alternate cutlery basket has been provided for convenience. The cutlery basket handle is adjustable – position (a) or (b) . The basket can be used in the upper or lower dishwasher basket as required.

Alternative basket loads Lower Basket

Top Basket

TIPS AND INFORMATION
Examples of incorrect loading

PROGRAM DESCRIPTIONS
Program items

Information for test laboratories

For all the necessary information for performance testing, send an email to dishwasher@standardtest.info In your mail please provide the model number and PNC number that is on the rating plate on the appliance door.

• Recommended program for the normally soiled load.
  ** Only powder detergent should be used in the Rinse program. At the end of the program, for improved drying results, it is recommended the door be opened approximately 50mm for some minutes before removing the dishes.

WARNING

Short programs do not include a drying step. The values declared above are the values obtained under laboratory conditions according to relevant standards. These values can change depending on conditions of product use and environment (network tension, water pressure, water input temperature and environment temperature).

SWITCHING ON THE MACHINE AND SELECTING A PROGRAM

Switching on the machine

Progress indicator
You can follow the program flow using the progress indicator lights located on the control panel .

Changing a program
If you would like to change programs while a washing program is on .

Cancelling a program
If you would like to cancel a program while a washing program is in progress.

Switching the machine off

TIPS AND INFORMATION
NOTE : If the machine door is opened during washing or the power is cut off, the machine resumes the program when the door is shut or the power comes back.
NOTE: For better drying results, when the program has finished keep the door ajar for some minutes before you remove the dishes.

MAINTENANCE AND CLEANING

Swtich off the power supply or disconnect the product before any maintenance or cleaning operation.

Cleaning the machine at regular intervals prolongs the machine’s service life. Oil and lime may accumulate in the machine’s washing section. To clean the machine:

Fill the detergent compartment with detergent, do not load any dishes into the machine, select a program that runs at high temperature, and start the machine. Alternatively, use descaling material available in the market. (Dishwasher cleaners produced by detergent manufacturers .)

Cleaning the seals in the machine door
To clean any accumulated residues in the door seals, wipe the seals regularly by using a dampened cloth.

Cleaning the machine
Clean the filters and spray arms at least once a week. Unplug your machine and turn off its tap before starting the cleaning. Do not use abrasive materials when cleaning your machine. Wipe with a fine cleaning material and a dampened cloth.

Filters
Check if any food wastes have remained on the coarse and fine filters. If any food wastes is found, remove the filters and clean them thoroughly with water under the tap.

a . Micro Filter
b . Coarse Filter
c . Metal

1. To remove and clean the filter combination (a+b), turn it counterclockwise and remove it by lifting upwards.
2. Pull and remove the metal filter (c) .
3. Then pull the coarse filter (b) out of the micro filter. Rinse it with water under the tap and reassemble.
4. Relocate the Coarse/Microfilter (a) combination into the metal filter and turn it in the direction of the arrow It is locked when the arrows on the microfilter can be seen on either side.
5. Reposition the metal filter in the machine.
6. Never use your dishwasher without any filter.
7. Incorrect fitting of the filter will reduce the washing effectiveness.
8. Clean filters are very important in terms of the proper running of the machine.

MAINTENANCE AND CLEANING
Spray arms
Check whether the holes for the upper and lower spray arms are clogged. If there is any clogging, remove the spray arms and clean them underwater.
You can remove the lower spray arm by pulling it upwards, while the upper spray arm can be removed by turning the lock nut to the left. Be sure that the nut is tightened when refitting the upper spray arm.

Hose filter

The inlet hose filter reduces contamination (sand, clay, rust etc .) that might be occasionally carried in through the main’s water supply or the indoor plumbing, and avoids damage to dishwasher components. Check the filter and the hose from time to time and clean them if necessary. To clean the filter, first, turn off your tap and then remove the hose. After removing the filter from the hose, clean it under the tap. Insert the cleaned filter back into its place inside the hose. Refit the hose and check that there are no leaks.

FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE

• Contact the service center.
F2| Draining fault| • Cancel program and power off the machine, then check the following
• Spigot on sink trap is clogged
• Check if the drain spigot membrane has been removed
• Drain hose is clogged
• Filters of the dishwasher may be clogged
• If the error continues contact the service center.
F3| Water overfill| • Close the tap
• Contact the service center.
F5| Water supply fault| • Make sure the water tap is open and the main water supply is on
• Close the tap, disconnect the hose and clean the filter at the tap
connection end
• Check the inlet hose is not kinked
• If error continues contact the service center.
F6| Faulty heater sensor| • Contact the service center.
F7| Overheating (water temperature too high)| • Contact the service center.
F8| Not heating| • Contact the service center.
F9| Flow control position error| • Contact the service center.
FE| Power supply fault| • Restart the dishwasher.
H01 – H24| Delay  has been selected| • Cancel the delay setting.

PRACTICAL AND USEFUL INFORMATION

1. Whenever you will not be operating your machine:
   • Unplug the machine and then turn the water off.
   • Leave the door slightly ajar in order to prevent the formation of unpleasant odors.
   • Keep the machine interior clean.

2. Eliminating water droplets:
   • Wash the dishes with the intensive program.
   • Increase the rinse aid setting.
   • If plastic items are washed, water drops on these items will be unavoidable. Programs with higher temperatures and increased rinse aid settings may reduce the water drops. Check that the plastic items are suitable for dishwasher use.

3. Correctly loaded dishes will give the best energy consumption, washing, and drying performance.

4. Scrape off food soils before you place dirty dishes in the machine.

5. Operate the machine after it is completely full.

6. Use pre-washing program only when necessary.

7. Observe program information and the average consumption values table when selecting a program.

8. Since the machine will reach high temperatures, it should not be installed near a refrigerator.

9. If the appliance is located where the risk of freezing exists, you must completely drain the water that has remained in the machine. Turn off the water tap, disconnect the water inlet hose from the tap and allow the interior water to drain.

TROUBLESHOOTING

If one of program monitor lights is
on and start/pause light is flashing| • Your machine’s door is open, shut the door.
If the program won’t start| •  Check if the plug is connected.
• Check your indoor fuses.
• Be sure that the water inlet tap is turned on.
• Be sure that you have closed the machine door.
• Be sure that you switched off the machine by pressing the Power On/Off button.
• Be sure that the water inlet filter and the machine filters are not clogged.
• First time use: Check if the drain spigot’s membrane has been removed or
spigot blocked.
• Check if the delay start has been selected – reset.
If detergent residues are left in the
detergent compartment| • Detergent has been added when the detergent compartment was wet.
• A large dish in the lower basket has blocked the dispenser door.
If water is left inside the machine
at the end of the program| • The water drain hose is clogged or twisted.
• The filters are clogged.
• The program is not finished yet.
If the machine stops during a wash
operation| • Power failure.
• Water inlet failure.
• Program can be on standby mode.
If shaking and hitting noises are heard
during a wash operation| • Dishes placed incorrectly.
• Spray arm hitting the dishes.
If there are partial food wastes left on
the dishes| • Dishes placed incorrectly into the machine sprayed water did not reach related places.
• Basket overloaded.
• Dishes leaning against one another.
• Very small amount of detergent added.
• An unsuitable, rather weak wash program selected.
• Spray arm clogged with food wastes.
• Filters clogged.
• Filters incorrectly fitted.
• Water drain pump clogged.
If there are whitish stains on the dishes| • A very small amount of detergent is being used.
• Rinse aid dosage setting at a very low level.
If the dishes won’t dry up| • A program without a dry operation selected.
• Rinse aid dosage set too low.
• Dishes unloaded too fast.
If there are rust stains on the dishes| • Stainless-steel quality of the dishes washed is insufficient.
• Unhealthy mains grounding.

Call an authorized service center if the problem still persists after the controls or in case of any malfunction not described above.

Warranty

FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: WESTINGHOUSE DISHWASHERS

This document sets out the terms and conditions of the product warranties for Westinghouse Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should there be a manufacturing defect in your Appliance. This warranty is in addition to other rights you may have under the Australian Consumer Law.

1. In this warranty:
   (a) ‘ACL’ or ‘Australian Consumer Law’ means Schedule 2 to the Competition and Consumer Act 2010;
   (b) ‘Appliance’ means any Electrolux product purchased by you and accompanied by this document;
   (c) ‘ASC’ means Electrolux’s authorised serviced centers;
   (d) ‘Westinghouse’ is the brand controlled by Electrolux Home Products Pty Ltd of 163 O’Riordan Street, Mascot NSW 2020, ABN 51 004 762 341 in respect of Appliances purchased in Australia and Electrolux (NZ) Limited (collectively “Electrolux”) of 3-5 Niall Burgess Road, Mount Wellington, in respect of Appliances purchased in New Zealand;
   (e) ‘Warranty Period’ means the period specified in clause 3 of this warranty;
   (f) ‘you’ means the purchaser of the Appliance not having purchased the Appliance for re-sale, and ‘your’ has a corresponding meaning.

2. Application: This warranty only applies to new Appliances, purchased and used in Australia or New Zealand and is in addition to (and does not exclude, restrict, or modify in any way) other rights and remedies under a law to which the Appliances or services relate, including any nonexcludable statutory guarantees in Australia and New Zealand.

3. Warranty Period: Subject to these terms and conditions, this warranty continues for in Australia for a period of 24 months and in New Zealand for a period of 24 months, following the date of original purchase of the Appliance.

4. Repair or replace warranty: During the Warranty Period, Electrolux or its ASC will, at no extra charge if your Appliance is readily accessible for service, without special equipment and subject to these terms and conditions, repair or replace any parts which it considers to be defective. Electrolux may, in its absolute discretion, choose whether the remedy offered for a valid warranty claim is repair or replacement. Electrolux or its ASC may use refurbished parts to repair your Appliance. You agree that any replaced Appliances or parts become the property of Electrolux.

5. Travel and transportation costs: Subject to clause 7, Electrolux will bear the reasonable cost of transportation, travel, and delivery of the Appliance to and from Electrolux or its ASC. Travel and transportation will be arranged by Electrolux as part of any valid warranty claim.

6. Proof of purchase is required before you can make a claim under this warranty.

7. Exclusions: You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship. This warranty does not cover:
   (a) light globes, batteries, filters or similar perishable parts;
   (b) parts and Appliances not supplied by Electrolux;
   (c) cosmetic damage which does not affect the operation of the Appliance;
   (d) damage to the Appliance caused by:
   (i) negligence or accident;
   (ii) misuse or abuse, including failure to properly maintain or service;
   (iii) improper, negligent or faulty servicing or repair works done by anyone other than an Electrolux authorised repairer or ASC;
   (iv) normal wear and tear;
   (v) power surges, electrical storm damage or incorrect power supply;
   (vi) incomplete or improper installation;
   (vii) incorrect, improper or inappropriate operation;
   (viii) insect or vermin infestation;
   (ix) failure to comply with any additional instructions supplied with the Appliance;
   In addition, Electrolux is not liable under this warranty if:
   (a) the Appliance has been, or Electrolux reasonably believes that the Appliance has been, used for purposes other than those for which the Appliance was intended, including where the Appliance has been used for any non-domestic purpose;
   (b) the Appliance is modified without authority from Electrolux in writing;
   (c) the Appliance’s serial number or warranty seal has been removed or defaced

8. How to claim under this warranty: To enquire about claiming under this warranty, please follow these steps:
   (a) carefully check the operating instructions, user manual and the terms of this warranty;
   (b) have the model and serial number of the Appliance available;
   (c) have the proof of purchase (e.g. an invoice) available;
   (d) telephone the numbers are shown below.

9. Australia: For Appliances and services provided by Electrolux in Australia: Electrolux goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the Appliance repaired or replaced if the Appliance fails to be of acceptable quality and the failure does not amount to a major failure. ‘Acceptable quality’ and ‘major failure’ have the same meaning as referred to in the ACL.

10. New Zealand: For Appliances and services provided by Electrolux in New Zealand, the Appliances come with a guarantee by Electrolux pursuant to the provisions of the Consumer Guarantees Act, the Sale of Goods Act, and the Fair Trading Act. Where the Appliance was purchased in New Zealand for commercial purposes the Consumer Guarantee Act does not apply.

11. Confidentiality: You accept that if you make a warranty claim, Electrolux and its agents including ASC may exchange information in relation to you to enable Electrolux to meet its obligations under this warranty.

Important Notice
Before calling for service, please ensure that the steps listed in clause 8 above have been followed.

FOR SERVICE
or to find the address of your nearest
authorised service centre in Australia
PLEASE CALL 13 13 49
For the cost of a local call
(Australia only)| AUSTRALIA
ELECTROLUX HOME PRODUCTS
163 O’Riordan Street,
Mascot NSW 2020
electrolux.com.au| FOR SPARE PARTS
or to find the address of your nearest
spare parts center in Australia
PLEASE 13 13 50
For the cost of a local call
(Australia only)
---|---|---
FOR SERVICE
or to find the address of your nearest
authorised service centre in New Zealand
PLEASE CALL 0800 10 66 10
(New Zealand only)| NEW ZEALAND
ELECTROLUX (NZ) Limited
3-5 Niall Burgess Road, Mount Wellington
electrolux.co.nz| FOR SPARE PARTS
or to find the address of your nearest
spare parts center in New Zealand
PLEASE 0800 10 66 20
(New Zealand only)

For more information on all Westinghouse appliances, or for dimension and installation information, call into your retailer, phone or email our customer care team or visit our website:

AUSTRALIA
phone: 1300 363 640
fax: 1800 350 067
email: customercare@electrolux.com.au
web: westinghouse .com .au

NEW ZEALAND
phone: 0800 436 245
fax: 0800 225 088
email: customercare@electrolux.co.nz
web: westinghouse.co.nz

TOP SERVICE
Top Service encompasses the after-sales service provided by The Electrolux Group to consumers including delivery, home service, and spare parts.

P/No: 5208 2734 Issue: F
and WESTINGHOUSE are trademarks of Westinghouse Electric Corporation.
Used under license by Electrolux Home Products Pty Ltd . All Rights Reserved.
© 2019 Electrolux Home Products Pty Ltd.
WMAN_WSF6608_May19

References

• Electrolux NZ | Home & Kitchen Appliances
• Electrolux Australia | Home & Kitchen Appliances

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>