LG LVRF001 Air Conditioner User Manual

May 15, 2024
LG

LG LVRF001 Air Conditioner

Product Information

Specifications
Model Name: LVRF-001

Major Features

  • ARM Dual Cortex- M4
  • WLAN: Real-M300, IEEE 802.11b/g/n 2.4Ghz
  • Hardware-based AES-128/192/256 encryption support
  • RTOS-based integrated SW development environment support
  • Supports Bluetooth LE 5.0
  • Refrigerator control through server-based natural language voice recognition
  • Input power: DC 12V or DC 5V (Harness cable length < 3M)
  • Mic. spec: 2Ch. Analog MEMS Mic.
  • Speaker: 1.5W / 4Ω

Product Usage Instructions

Safety Precautions
Be sure to read the safety precautions before use and installation to protect the safety of users and installers and prevent property damage.

Installation
Follow the installation instructions provided in the user manual. Ensure proper power input (DC 12V or DC 5V) and cable length less than 3 meters.

Operation
To operate the module:

  1. Ensure the supply voltage is within the recommended range (11.4V to 12.6V for VCC).
  2. Connect the necessary interfaces such as MIC, SPK, and UART according to the provided connector options (CN201, CN203, CN204, CN212).
  3. Utilize the voice recognition function for controlling the connected devices through natural language commands.

Maintenance
Regularly check for any loose connections or damage to the module. Keep the module clean and free from dust or debris.

Frequently Asked Questions (FAQ)

  • What is the recommended power supply for the LVRF-001 module?
    The module can be powered by either DC 12V or DC 5V, with a harness cable length of less than 3 meters.

  • How can I control my refrigerator using the voice recognition feature?
    To control your refrigerator, use server-based natural language voice commands that are supported by the module.

Introduce

Summary

  • LVRF-001 is a module that supports Wi-Fi, BLE wireless communication, Air-conditioner voice recognition and artificial intelligence processing and is designed to operate independently. It supports multiple interfaces and has the advantage of being able to connect various external devices.
  • In addition, it has high performance based on CPU and has specialized functions for artificial intelligence, so it can be applied to home appliances that use artificial intelligence. It can operate as the Wi-Fi module allows you to connect with the voice recognition server.

Major Features and Specifications

  1. ARM Dual Cortex-M4
  2. WLAN: Real-M300, IEEE 802.11b/g/n 2.4Ghz
  3. Hardware-based AES-128/192/256 encryption support
  4. RTOS-based integrated SW development environment support
  5. Supports Bluetooth LE 5.0
  6. Refrigerator control through server-based natural language voice recognition
  7. Input power: DC 12V or DC 5V (Harness cable length < 3M)
  8. Mic. spec: 2Ch. Analog MEMS Mic.
  9. Speaker: 1.5W / 4 ΩLG-LVRF001-Air-Conditioner-fig-2

Electrical Characteristics

Absolute maximum ratings
Table 3-1 Absolute maximum ratings. Exceeding one of the absolute maximum ratings will result in poor performance or It can be caused damage.

Rating Min. Max. Unit
Supply voltage 4.2 18 V
2.7 6 V
Typical WIFI Output Power(Conduction) 17±3 dBm

Electro Static Discharge (ESD)
The LVR-001 can withstand ESD voltages up to 1000 V Human Body Model (HBM).According to JESD22-A114, JESD22-A115, it can withstand up to 450 V CDM (Charge Device Model).

Recommended Operation Condition
Table 3-2 Recommended operation condition

Rating Min. Typ. Max. Unit
***** Supply Voltage VCC 11.4 12 12.6 V
4.74 5 5.25 V

Current Consumption
This is the data measuring power consumption in a scenario where the voice recognition module is in operation mode and the voice recognition function is used.

Condition : Tamb=25oC, VCC=12 V
Table 3.4 Power consumption in Normal mode. *Output power value is based on WLAN module’s antenna port Typ. output

**Max Output Power*** Typ. Current Comments
+17 dBm 290 mA 11 Mbps, In Case of voice recognition operation.
**Max Output Power*** Typ. Power Consumption Comments
--- --- ---
+17 dBm 3,480 mW 11 Mbps, In Case of voice recognition operation.

Condition : Tamb=25oC, VCC=5 V
Table 3.5 Power consumption in Normal mode. *Output power value is based on WLAN module’s antenna port Typ. output

**Max Output Power*** Typ. Current Comments
+17 dBm 674 mA 11 Mbps, In Case of voice recognition operation.
**Max Output Power*** Typ. Power Consumption Comments
--- --- ---
+17 dBm 3,370 mW 11 Mbps, In Case of voice recognition operation.

Antenna Characteristics(WLAN, Bluetooth Antenna)
Condition: antenna port radiation test of WLAN module VCC= 12 V, Temp= 0 to +70C, covered with shield-can.
Table 3-6 RF Characteristics

Frequency(MHz)| Efficiency (%)| Avg. Gain(dBi)| Peak Gain(dBi)
---|---|---|---
2400| 66.79| -1.75| 1.06
2442| 70.83| 1.5| 1.57
2485| 50.17| -3.0| 0.2

Frequency & output power

  • WLAN : 2412~2472 MHz 802.11b/g/n (bandwidth 20MHz) : 10mW/MHz
  • BT LE(1Mbps) : 2402~2480 MHz : 3.0 mW

Interface

LG-LVRF001-Air-Conditioner-fig-3

| Connector type| Description
---|---|---
CN201| 6 pin 2.00 mm pin header| UART(2PIN), Power Supply(2PIN_5V, 2PIN_12V)
CN203| 3 pin 2.00 mm pin header| MIC input(#1)
CN204| 3 pin 2.00 mm pin header| MIC input(#2)
CN212| 2 pin 2.00 mm pin header| SPK

Package Characteristics

Mechanical Characteristics of LVRF-001 PCB

LG-LVRF001-Air-Conditioner-fig-4

Regulatory Statement (FCC)

Part 15.19 Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Part 15.105 Statement (Class B)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Part 15.21 Statement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Responsible Party Information (Supplier’s Declaration of Conformity)

  • LG Electronics USA
  • 1000 Sylvan Avenue Englewood Cliffs
  • New Jersey, United States, 07632
Regulatory notice to host manufacturer according to KDB 996369 D03 OEM

Manual v01

List of applicable FCC rules
This module has been granted modular approval as below listed FCC rule parts.
FCC Rule parts 15C(15.247)

Summarize the specific operational use conditions
The OEM integrator should use equivalent antennas which is the same type and equal or less gain then an antenna listed in this instruction manual.

RF exposure considerations
The module has been certified for integration into products only by OEM integrators under the following condition:

  • The antenna(s)must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator(antenna) and all persons at all times.
  • The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.
  • Mobile use
    As long as the three conditions above are met, further transmitter testing will not be required.
    OEM integrators should provide the minimum separation distance to end users in their end-product manuals.

Antennas list

  • This module is certified with the following integrated antenna.
    • Type: chip type
    • Max. peak Antenna gain
  • BT, WIFI Ant: 1.57 dBi (2402 – 2480 MHz)(2412 – 2462 MHz)
  • Any new antenna type, higher gain than listed antenna should be met the requirements of FCC rule 15.203 and 2.1043 as permissive change procedure.

Label and compliance information
End Product Labeling
The module is labeled with its own FCC ID and IC Certification Number. If the FCC ID and IC Certification Number are not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a visible area with the following:

  • FCC ID: BE??LVRF001
  • IC: 2703N-LVRF001

Information on test modes and additional testing requirements
OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, additional transmitter in the host, etc.).

Additional testing, Part 15 Subpart B disclaimer
The final host product also requires Part 15 subpart B compliance testing with the modular transmitter installed to be properly authorized for operation as a Part 15 digital device.

Regulatory Statement (ISED)

RSS-GEN, Sec. 7.1.3–(license-exempt radio apparatus)
This device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF Exposure

  • The antenna (or antennas) must be installed so as to maintain at all times a distance minimum of at least 20 cm between the radiation source (antenna) and any individual.
  • This device may not be installed or used in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals