dyras IC-002B Induction Cooker Instruction Manual

Instruction Manual
Induction cooker
Modell: IC-002B
AC 220-240V 50/60Hz 3500W (2000W+1500W)
INSTRUCTION FOR USE
PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE
REFERENCE.

IC-002B Induction Cooker

Notes:
Please read the instruction manual thoroughly before using your new appliance. It is important to keep these instructions as an useful reminder.
If the appliance becomes faulty during regular use, it should only be repaired by an authorized service engineer. The manufacturer is not responsible if the appliance becomes damaged or defective as a result of the user not following the information incluses in the instruction manual.
Important safeguards:
When using electrical appliance, basic safety precautions should always be followed including the following:

• Read all instructions.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against electrical shock do not immerse cord, plugs, or the whole unit into water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
• The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
• Always attach plug to appliance first, then plug cord into the wall outlet.
  To disconnect, turn any control to “off”, then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• Do not cook on broken cook-top. If cook-top should break, cleaning solutions and spillovers may penetrate the broken cook-top and create a risk of electric shock.
• Clean cook-top with caution. If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid steam burn, some cleaners can produce noxious fumes if applied to a hot surface.
• Do not place metallic objects such as knives, forks, spoons and lids on the table stove since they can get hot.
• A short power-supply cord is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
• Longer extension cords are available and may be used if care is exercised in their use.
• If a long extension cord is used:
  1. The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance;
  2. The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over unintentionally.
  Notices:
  This appliance has a polarized plug (one blade is wider than the other).
  To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

Product configuration:

Control Panel:

Operational instruction:

* Increase (+) / Decease (-) button*
The two buttons are for adjusting heat level. There are totally ten level, from 200W to 2000W.
The corresponding power level is from 60°C to 240°C.
The buttons are also for setting time in timer function
On/Off button
Put on the plug, all the LED light blinking & “BEEP” shortly, LED screen indicate “C”. Press On/Off again, enters the standby mode.
LED screen indicate “ON”.
Function button
Press function button, you can select display temperature of power on the screen.
after select the function,you can press increase button (+) or decease button ( – ), set the degree or power.
Left burner
TEMP mode: 60℃-80℃-100℃-120℃-140℃-160℃-180℃-200℃-220℃-240℃ Power mode: 200W- 400W-600W -800W-1000W-1200W-1400W-1600W-1800W2000W
Note:
Factory default setting in Power mode is 1600W; for TEMP mode is 180℃.
Right burner
TEMP mode: 60℃-80℃-100℃-120℃-140℃-160℃-180℃-200℃-220℃-240℃ Power mode: 200W- 400W-600W-800W-1000W-1200W-1300W-1500W
Note: Factory default setting in Power mode is 1300W; for TEMP mode is 180℃.
Timer button
Press TIMER button to enter select the timer setup (from 1 minute to 4 hours).
Press + or – button to set cooking time. Each single press is increment of 1 minute; press and hold for increments of 10 minutes. Press LOW button will jump to 1 minute on the timer or HIGH for the maximum 4 hours.
Lock button**
Press increase button (+) or decease button (-) in 3 second to lock all the function.
The other button no response to touch.
To deactivate the LOCK, press increase button (+) or decease button (-) in 3 second.
It will returns to selection mode or press the ON/OFF button turn to standby mode.
* Warming
Turn off: after use, switch off the appliance. Don’t plug it out immediately.
There’s 1 minute preset for the fan continuous working until the unit cool down.
After the cooling fan stops operation, unplug the appliance from the socket.

Selection of cookware:

Material required:

• Steel, cast iron, enameled iron, stainless steel, flat-bottom pans/pots with bottom diameter from 12cm to 26cm.
• So suggest to use the required pot, do not try to use other pot instead (especially pressure sensors vessels.)

Please kindly according to the below requirement if necessary to use the vessel is not equipped.

• Pan/pot must be suitable for induction cooker.
• Pan/pot should be tried out if it’s bought by self to see if there are unusual phenomena.
• Pan/pot bought by self should be flat and come with the cover with gas vent.

Maintance and daily care:

1. Remove the power plug prior to clean the unit. Do not clean it until the surface cools down.

2. Glass plate, panel and the shell:
   a) Soft cloth for slight stain.
   b) For greasy, dirt, blot by using a clean damp cloth with neutral detergent.

3. While the radiator-fan working, dust and dirt would remain on the gas vent, please clean it by brush or cotton stick regularly.

4. Remember not washing the unit by water directly to avoid damaging.

5. To protect induction cooker, be sure to have a good contact between plug and socket before using.

6. Do not pull out the power cord directly during operation. To extend the appliance’s using life, press the “ON/OFF” button first, then pull out the power cord.

7. In order to make operating time longer, the fan would still working for cooling the plate, it is better to plug out after the fan stops working.

8. Please pull out the power cord and put it away when not used for a long time.
   Any other servicing should be performed by an authorized service representative.

Troubleshooting and treatment:

During operations, if any error occurred, please check the following table before calling for service. Below are common errors and the checks to perform.
If the above remedies/controls can not fix the problem, unplug the appliance immediately.

EO| Without cookware or Incompatible cookware used| Put suitable pan/pot on t1„
---|---|---
E1| IGBT sensor open circuit/short circuit| Please contact Service Centre for checking and repairing.
E2| IGBT over heat| Please contact Service Centre for checking and repairing.
E3| Over-voltage 270V| Please check power amply,,,,, wait until the power supply back to normal
E4| Under-Voltage 90V| Please check power §up,ply,,,,, wait until the power supply back to normal
E5| Top plate sensor open/short circuit| Please wait for a few minutes until the unit cools down and check the pot/pan
E6| Top plate over heat| Please contact Service Centre for checking and repairing.

Technical specifications:

Modell: IC-002B
Rated voltage: 220-240V
Rated frequency: 50/60Hz
Rated powe consumption: 3500W (2000W+1500W)
Protection class (against electric shock): II
Manufacturer/Importer: Vöröskő Kft., 8200 Veszprém, Pápai út 36.
THE CE SYMBOL
The device complies with the regulations for safety and electromagnetic compatibility (EMC).
The “CE” marking on the device is located on the rating plate, on the packaging and in the operating instructions.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

DEAR CUSTOMER

• Please note that the following operating, storage, environmental, and environmental conditions may affect the lifetime and usability of the device, and may adversely affect, shorten, or prolong its life if not permanently or temporarily.
  Always protect your device from the following:
• Use or storage in a humid, damp environment may cause:
  – premature aging of the device’s enclosure, electrical insulation,
  – premature wear and aging of the structural components of plastics and rubber
  -Improve, accelerate the corrosion of electrical units, wires oxidation, metal parts.
• Use in dusty environments or in kitchens (where the atmosphere is exposed to, for example, cooking oil or cooking fat) may cause:
  – Deposition of greasy powder coating on the mechanical andelectrical components and casing of the unit, which can cause electrical contact failure, even total malfunction, and damage to plastic and rubber components.
• Direct sunlight can cause:
  – Premature aging of the device casing, plastic and rubber parts, deterioration of strength and other structural features, porosity and brittleness of their surface, which may endanger proper, safe use.
• Continuous industrial use may cause:
  – Premature structural wear due to forced operation of the device, premature engine wear, damage due to continuous wear and overheating.
• Device storage in freezing cold conditions may cause:
  – Structural damage or breakage of plastics and rubber parts which endangers the intended safe use,
  – Oxidation due to condensation, corrosion of metal parts of the device.
• Can be caused by radiation or direct heat (such as providing an inappropriate distance from the stove, radiator):
  – structural damage, deformation, deformation, softening, melting, weakening of electrical insulation of plastic and rubber parts, coverings.
• To prolong the life of the device and prevent improper use, avoid or prevent the above conditions and always follow the product operating instructions, otherwise you will be responsible for improper operation for which the manufacturer assumes no responsibility. We recommend that you have your appliance periodically inspected by an authorized service center, even if you do not experience any malfunctions, as this may help you troubleshoot an early stage problem and increase the life of your product.

www.dyras.hu
Copyright © 2022 The dyras wwe.factory LLC U.S.A.
No parts of the content (including logos, design, photos, text, colour scheem arrangements, etc.)
may be reproduced, resued or redistrubuted for any purpose whatsoever,
or distributed to a thirdparty for such purposes, without the written permission of The dyras wwe.factory LLC.
®= registered trademark of Dyras Europe Kft.

References

• Dyras | Fedezze fel a különbséget!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>