LAKELAND Hand Mixer Instruction Manual
- June 7, 2024
- LAKELAND
Table of Contents
- LAKELAND Hand Mixer Instruction Manual
- LAKELAND HAND MIXER
- PRODUCT FEATURES
- SAFETY CAUTIONS
- ATTACHING THE BEATERS
- ATTACHING THE DOUGH HOOKS
- INSTRUCTIONS FOR USE
- A GUIDE TO THE SPEED SETTINGS
- HINTS AND TIPS
- FREQUENTLY ASKED QUESTIONS
- CARE AND CLEANING
- TECHNICAL INFORMATION
- ELECTRICAL CONNECTIONS
- RECYCLING YOUR ELECTRICALS
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LAKELAND Hand Mixer Instruction Manual
LAKELAND HAND MIXER
Thank you for choosing the Lakeland Hand Mixer.
Please take a little time to read this booklet before getting started and keep
it in a safe place for future reference.
With a powerful 400W motor, 5 speeds and a pulse, this practical mixer will
comfortably handle your everyday mixing, whisking, kneading, beating and
combining tasks.
Here at Lakeland, our award-winning family-owned business still offers the
same excellent quality, value for money and exceptional customer service as
when we founded the company back in the 1960s.
Our products are hand-picked and thoroughly tested so you can be sure that
everything you purchase will be a pleasure to use for many years to come.
PRODUCT FEATURES
-
Eject Button
-
Speed switch
-
Handle
-
Beater holes
-
Beaters
-
Dough hooks
SAFETY CAUTIONS
Carefully read all the instructions before using the appliance and keep in a safe place for future reference. Always follow these safety cautions when using the appliance to avoid personal injury or damage to the appliance. This appliance should be used only as described in this instruction book
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children unless they are older than 8 and supervised.
- Make sure your electricity supply matches the voltage shown on the appliance.
- Ensure all packaging materials and any promotional labels or stickers are removed from the appliance before the first use.
- Always inspect the appliance before use for noticeable signs of damage. Do not use if damaged or has been dropped. In the event of damage, or if the appliance develops a fault contact the Lakeland customer care team on 015394 88100.
- Do not use this appliance if the lead is damaged. Contact the Lakeland customer care team on 015394 88100.
- Always use the appliance on a dry, level, heat resistant surface.
- Unplug from the mains when not in use. To disconnect, turn the socket to “off“ and remove the plug from the mains socket.
- Do not use any accessories or attachments with this appliance other than those recommended by Lakeland.
- To protect against fire, electric shock or personal injury, do not immerse cord, plug or lid in water or other liquids.
- Do not leave the lead hanging over the edge of a kitchen table or worktop. Avoid contact between the lead and hot surfaces.
- For indoor use only.
- For domestic use only.
- This appliance should be used for preparation of food as described within the instructions for use that accompany it.
- Always ensure that your hands are dry before removing the plug from the mains socket. Never pull the plug out of the mains socket by its lead
- To avoid injury or possible fire, do not cover the appliance when in use.
- Do not connect this appliance to an external timer or remote control system.
- An extension cable may be used with care. The electrical rating of the cable should be at least as great as the appliance. Do not allow the cable to hang over the edge of the worktop or touch any hot surfaces.
- This appliance complies with the basic requirements of Directives 2014/30/EU (Electromagnetic Compatibility) and 2014/35/EU (Low Voltage Directive).
- WARNING: A cut off plug inserted into a 13amp socket is a serious safety (shock) hazard. Ensure the cut off plug is disposed of safely.
- CAUTION: The plastic bags used to wrap this appliance or the packaging may be dangerous. To avoid risk of suffocation, keep these bags out of reach of babies and children. These bags are not toys.
- Avoid contact with moving parts, to avoid the risk of injury and damage to the appliance. Do not put your hands or utensils inside the mixing bowl while using the appliance.
- Always switch off and unplug the appliance before you attach or remove the beaters or dough hooks.
- Replace the beaters or dough hooks if they show any signs of damage.
- Never leave the appliance unattended while switched on.
- Do not use the appliance near an oven, hot surface or other source of heat. Do not put the appliance in the refrigerator.
- Be sure the beaters or dough hooks are securely in place before using the appliance.
- Do not use the appliance to mix heavy ingredients as the motor may overheat.
- Do not operate the appliance continuously for more than 4 minutes. Allow the motor to rest between each use for 20 minutes.
ASSEMBLING YOUR HAND MIXER AND USING FOR THE FIRST TIME
- Unpack the hand mixer and remove all the packaging materials.
- Before first use, wipe the hand mixer with a clean damp cloth.
- Wash the beaters and dough hooks in warm soapy water, rinse and dry thoroughly.
- Make sure all parts are clean and dry before assembling the product.
WARNING: Do not insert the plug into an electrical outlet and turn on the hand mixer until you have attached the beaters or dough hooks.
BEATERS AND DOUGH HOOKS
- Make sure the beaters or dough hooks are securely in place before using the appliance.
ATTACHING THE BEATERS
Take the beater and push into the largest beater hole until you hear it ‘click’ into place. Click the other beater into the other hole.
ATTACHING THE DOUGH HOOKS
Take the dough hook with the ring, push this into the largest beater hole
until you hear it ‘click’ into place. Click the other dough hook into the
other hole.
The hand mixer is now ready to use.
INSTRUCTIONS FOR USE
- When you switch on the appliance for the first time there may be a slight burning smell, this is normal and will stop after a few uses.
- Always make sure the speed switch is at ‘0’, then plug in and switch on the hand mixer at the socket.
- Hold the hand mixer firmly by the handle and place it in your bowl with ingredients.
- Slide the speed switch to the first dot.
- Use the speed switch, sliding up or down to select your desired speed. Start off on the first dot and then increase the speed as required.
- If you require a short fast burst of speed, slide the button to ‘P’ pulse whilst mixing.
- When your mixture is ready move the speed switch back to ‘0’.
- The beaters or dough hooks will continue to rotate for a few seconds after being switched off, wait until they have fully stopped before handling.
- The beaters and dough hooks can only be removed when the speed switch is in the ‘0’ position.
- ‘P’ pulse can also be used at the end of mixing to clean your beaters, lift them above your mix (keeping them still in the bowl), slide to the ‘P’ and back to ‘0’ to remove excess mixture before you finish.
- Switch off and unplug the hand mixer at the socket.
- To remove the beaters and dough hooks, hold them with one hand, press the eject button with the other and pull to release.
WARNING: Always switch off and unplug the appliance before you attach or remove the beaters or dough hooks. Avoid contact with moving parts to avoid risk of injury and damage to the appliance. Do not put your hands or utensils inside the mixing bowl while using the hand mixer.
A GUIDE TO THE SPEED SETTINGS
The hand mixer has sixteen speed settings. Begin mixing your ingredients on a low setting and increase the speed slowly.
HINTS AND TIPS
- To prevent splattering and flour dusting; lower the beaters or dough hooks fully into the mixture before switching the hand mixer on. When switching it off, allow the beaters or dough hooks to stop rotating before you remove them from your mixture.
- When mixing, if the appliance starts to slow or labour, increase the speed.
- Replace the beaters or dough hooks if they show any signs of damage.
- DO NOT use the mixer with heavy ingredients as the motor may overheat. If the appliance seems to be struggling to mix, switch off and unplug the appliance at the socket and reduce the amount of ingredients in the bowl.
- Do not use the hand mixer with heavy ingredients as the motor may overheat.
FREQUENTLY ASKED QUESTIONS
Question: Why is my hand mixer not working?
Answer: The hand mixer may not be plugged in or the speed has not been
selected. Check the mixer is plugged in and switched on. Move the speed switch
up a setting.
Question: Why are the beaters struggling to rotate?
Answer: The mixture is too thick, add more liquid. If your recipe states
otherwise, your mixture cannot be mixed with the hand mixer. You may need to
soften the ingredients or chop them into smaller pieces before further mixing.
Question: Why is my mixture splattering?
Answer: The speed setting is too high. Select a lower speed and fully lower
the beaters into the mixture before starting to mix.
CARE AND CLEANING
- Switch off and unplug the hand mixer at the socket before cleaning and when not in use.
- Press the eject button and remove the beaters or dough hooks from the mixer before cleaning.
- Clean thoroughly before using for the first time and after every use.
- Check the parts for wear or damage after every few uses.
- Do not use abrasive cleaners or steel wool.
- Never immerse the hand mixer in water or any other liquid.
- To clean the outer surfaces, wipe with a clean damp cloth and dry thoroughly before storing.
- Wash the beaters and dough hooks in hot, soapy water, rinse and dry thoroughly. Do not immerse beaters in water overnight.
- Store the hand mixer with the power cable loosely coiled. Never wrap it tightly around the hand mixer.
TECHNICAL INFORMATION
- Wattage: 400W.
- Voltage: 220 – 240V
- Frequency: 50/60 Hertz.
- RPM: 700 -1200.
ELECTRICAL CONNECTIONS
The appliance is fitted with a fused three-pin plug to BS1363 which is
suitable for use in all homes fitted with sockets to current specifications.
CHANGING THE 3 AMP FUSE Use a 3 amp BS1362 fuse. Only BSI or ASTA approved
fuses should be used. If you are unsure which plug or fuse to use, always
refer to a qualified electrician.
Note: After replacing or changing a fuse on a moulded plug which has a fuse
cover, the cover must be refitted to the plug; the appliance must not be used
without a fuse cover. If lost, replacement fuse covers can be obtained from an
electrical shop. This appliance complies with the following EU Directives:
2014/35/EU (Low Voltage Directive) and 2014/30/EU (EMC Directive)
RECYCLING YOUR ELECTRICALS
Along with many other high street retailers, Lakeland has joined a scheme
whereby customers can take their unwanted electrical products
to recycling points set up around the country. Visit www.recycle-more.co.uk to
find your nearest recycling point.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>