Chargers BS20 EV Wallbox Wall-Mounted Charger User Guide
- June 7, 2024
- Chargers
Table of Contents
**Chargers BS20 EV Wallbox Wall-Mounted Charger User Guide
**
Product Overview
**BS 20 (Mode C) (mode A)
App
**
DOWNLOAD AND CONNECT
IOS
Please search for ‘EVS Emaster’ in Apple Store
Android
Please download APP from official website.
http://www.evse.com
Guide to turn on the Bluetooth page
When searching for charging stations, if Bluetooth is not turned on, it
will prompt to turn on Bluetooth:
Guide to turn on the location page
When searching for the charging station, if the location service is not
turned on, it will prompt to turn on location access:
Use connection
Connection method and matters needing attention：
- Bluetooth connection must be used for the first connection. After the Bluetooth connection is successful, you can set the WIFI connection in the APP.
NOTE:
- In the case that both WIFI and Bluetooth can connect to the device, the device will give priority to WIFI connection.
- The device can only recognize 2.4G WIFI network, do not use 5.0G WIFI network to connect.
Custom charging-Single charging
There are three parameters that can be set for a custom single charging.
- Extend the duration: Extend certain duration to start charging from now on.
- Charging time: The maximum charging time, after which the charging station will automatically stop charging.
- Charging power: The maximum charging power, beyond which the charging station will automatically stop charging
Custom charging-Periodic charging
There are four parameters that can be set for charging with custom charging
cycle.
- Cycle start time: Set the time at which to start charging.
- Cycle repetition time: Set the days of the surrounding cycle to repeat, and you can select part or all of it.
- Charging time: The maximum charging time, after which the charging station will automatically stop charging.
- Charging power: The maximum charging power, beyond which the charging station will automatically stop charging.
User settings
The user settings page contains Nickname, Language Set, FAQ and About.
Charging records-My records
-
My records
Only the charging records of the user of this APP are counted. -
All records
All the charging records in the charging station are counted. -
Charging statistics:
The charging time and the charging power can be counted monthly and daily, and displayed in a bar graph. -
The record with a delete button:
The record stored in the mobile APP will be deleted, while the record of the charging station will not be deleted. -
Record synchronize button:
When the mobile phone needs to synchronize the recording of the charging station, you can press this button to synchronize, which will take a certain amount of time. -
Record derive button:
Generating records into a file and deriving it to other software through sharing.
APP FUNCTION INTRODUCTION
The charging parameter settings can be recorded in the APP, and the set data
will be automatically used for each charging parameter.
The main 3 charging parameter settings include.
- Set delay charging
- Limited charging time
- Set the maximum charging power
INSTRUCTION FOR USE（MODE A）
-
Plug into the socket
-
Plug into your EV
-
Press the button to start/stop charging
-
Enjoy the charging!
INSTRUCTION FOR USE（MODE C）
-
Plug into your EV
-
Press the button to start/stop charging
-
Enjoy the charging!
ILLUSTRATION OF SCREEN
SINGLE PHASE
- Real-time power
- Real-time voltage
- KWh charged
- Unit Temperature
- Charging animation
- Charging session duration
- Rated current
THREE PHASE
- Real-time effect in kW
- Voltage and current per phase
- Charging session duration
- kWh charged
- Charging animation
- Unit Temperature
FAILURE DESCRIPTION
Leakage Protection
- Check if there are any foreign objects or water in the charging plug or socket which may cause leakage.
- Unplug and reconnect. If the fault persists and vehicle works well, the charger needs to be deactivated.
Over Current
- Check the selected power. Try again with higher current and restart.
- Check if the charging function of vehicle works well. If so, the charger needs to be deactivated.
Short Circuit
- Check the selected power. Try again with higher current and restart.
- Check if the charging function of vehicle works well. If so, the charger needs to be deactivated
Over Temperature
Unplug and reconnect. If the fault persists, the charger needs to be deactivated.
Over Voltage
- Measure the input voltage to see if the current voltage is too high.
- Try to charge at another time.
- Voltage stabilizer is recommended if the voltage is often unstable
CP Error
Communication error between the car and charger has occurred.
- Unplug and reconnect. Make sure the plug is completely inserted.
- Try another AC charger to see if the problem remains. If your car works well, please contact the after sales personnel of the charger
SECURITY WARNING
Attention
Non-compliance with the operating instructions can have serious consequences.
Manufacturer does not assume any liability for damage caused disregarding
operating instructions or other warnings on the device itself.
High voltage, fire hazard! Never use the device if the housing is damaged or
opened!
This product is not suitable for people with limited mobility, sensory or
psychological disabilities, and is not suitable for people who lack use
experience or a certain degree of knowledge.
Failure to follow instructions may result in danger!
-
Regularly check if the charger has visible damage. The electric shock could occur when using a broken charger.
-
Make sure that all safety facilities and connections are available, Roperly installed and undamaged at all times and are tested regularly to ensure they can operate normally. Do not use the charger if the cables attached or connected to the device are damaged.
-
Before powering on the device, please confirm that the device is properly grounded to avoid unnecessary accidents. If a ground fault occurs, it must be assumed that the cable carries voltage. Please confirm that there’s no high-voltage power in the system before inspecting the charging station
-
Persons who install and use charging stations must obey the principles and regulations mentioned to ensure the personal safety and equipment safety.
-
All tools’ unnecessarily exposed metal parts should be insulated to prevent them from touching the metal frame to avoid short circuit.
-
To ensure the service life and stable operation of the charging station, the operating environment should be kept as clean as possible with a relatively stable temperature and humidity. The charging station must not be used in flammable environment or environments with volatile gas.
Please keep the power cord away form the heated surface. Please do not put the power cord in the gap of the closed door or pull it out of sharp edges or corners. -
Be sure to confirm that the input voltage, frequency, circuit breakers and other conditions of the device meet the specifications before the device is powered on. It’s important to observe the maximum permissible charging current of the connection.
-
Do not modify, retrofit, or change any part by yourself under any circumstances.
-
Please do not use this product as a toy. Pls. take good care of children to ensure that they will not play with this device as a toy nor put fingers into the charging connector when the power plug is still connected.
-
The circuit to which the charger is to be connected must be equipped with a residual current circuit breaker and a circuit breaker.
Note
- Without professional guidance, please do not connect the circuit by yourself.
- Do not use when the inside of the charging plug is wet.
- Do not install by yourself before reading the installation instructions.
- Except for electric car charging, please do not use it for other purposes
Special attention: Do not try to disassemble the device by yourself under any circumstances, otherwise the internal precision parts may be damaged, and you will not be able to enjoy after sales service.
Version Number: BSN-ESP-B20CN-2104
Updated Date: April 5th, 202
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>