JLAB 2AHYV-JAPNC GO Air True Wireless Earbuds User Guide

JLAB 2AHYV-JAPNC GO Air True Wireless Earbuds

LATEST AND GREATEST
Our team is constantly improving your product experience. This model may have new features or controls which are not detailed in this guide.
For the latest version of the manual, scan the QR code below.

BETTER TOGETHER
JLab is a proud to provide Major League Soccer athletes and gamers with the best personal tech in the locker rooms, for travel and pre-game focus. We’re introducing Lab’s real innovation and surprisingly awesome value to the passionate, authentic fans of MLS.

WE GOT YOUR BACK
We’re obsessed with creating the best possible experience around owning our products. If you have any questions, concerns, or feedback, we’re here for you. Contact a real human on our U.S.-based customer support team:
Website: jlab.com/contact
Email: support@ilab.com
Phone U.S.: +1 405-445-7219 (Check hours jlab.com/hours) Phone U.K./EU: +44 (20) 8142 9361 (Check hours jlab.com/hours
Visit jlab.com/warranty to initiate a return or exchange.

FIND YOUR FIT

VOICE PROMPTS

• “Ready to Pair”: JBuds Air Pro ANC are ready to pair to Bluetooth device
• “Battery Full”: 100-80%
• “Battery Medium”: 80-20%
• “Low Battery”: Less than 20%
  When power decreases to 10%, “Low Battery” will play

DOWNLOAD THE APP

Customize JBuds Air Pro ANC features and update the latest software.
Download the JLab App in Apple/Google Play Store.

QUICK TIPS

• Fully dry off the earbuds before putting in the charging case to avoid any damage to the case. The earbuds are sweat/water resistant but the case is not.
• Either earbud can connect to your device and be used independently. Simply take out the earbud from charging case and it will auto connect.
• Choosing the correct ear tip makes a significant improvement in audio quality due to proper seal for the driver. Try all ear tips for best results.

TROUBLESHOOTING

NO AUDIO IN ONE EARBUD OR EARBUDS DISCONNECTED (MANUAL RESET)

1. Keep earbuds in the charging case and forget “Jab JBuds Air Pro ANC” in your Bluetooth device settings.
2. Quick tap 7x on one earbud in charging case. Earbud blinks blue 4 times.
3. Quick tap 7x on other earbud in charging case. Earbud blinks blue 4 times.
4. Take both earbuds out of the charging case. One earbud will blink blue/white indicating ready to pair to your device.

PAIR UP

1. Take earbuds out of case and remove stickers. Place earbuds back in case and close door.
2. Blue lights on case indicates charging. Remove earbuds from case.
3. One earbud will blink blue/white indicating ready to pair to your device. Select “JLab JBuds Air Pro ANC” in your device’s Bluetooth settings.

GO AHEAD, PRESS THE BUTTON

• VOLUME DOWN: 1× Tap
• SIRI (iOS) or “OK GOOGLE” (ANDROID): 2x Tap
• BE AWARE / ANC ON / ANC OFF: Press & hold 1+ sec
• CHANGE EQ: 3x Tap (cycles 4 EQ settings)
• VOLUME UP: 1x Tap
• ANSWER: 1× Tap
• HANGUP: 2x Tap
• REJECT INCOMING CALLS: Press & hold 1+ sec
• PLAY / PAUSE: 2x Tap
• TRACK FORWARD: Press & hold 1 + sec
• CHANGE EQ: 3x Tap (cycles 4 EQ settings)

MUSIC / MOVIE MODE: Press & hold both buttons simultaneously 2+ sec
TURN OFF WITHOUT CASE: Turn off Bluetooth from device settings. Earbuds will power off after 3 minutes.

ADDING NEW/ADDITIONAL DEVICES

Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth from new device. Earbuds will automatically enter Bluetooth Pairing. Select “JLab Buds Air Pro ANC” in new device settings to connect.

GET CHARGED (EARBUDS)
Placing in the charging case will auto power OFF and start charging. Blue lights will indicate earbuds are charging and will turn OFF when fully charged.

Removing the earbuds will auto power ON and connect to last device.

GET CHARGED (CASE)
Connect JBuds Air Pro ANC to computer or USB 5V 1A (or less) output device

THE RIGHT SOUND FOR EVERY MOMENT

We get it, sound is personal. Choose your sound preferences from our EQ3 settings and customize your sound style to match exactly what you’re doing.
EQUALIZER MODES

“JLab SIGNATURE”
JLab С3™M signature sound with amplified vocals and bass

BEST FOR
Best option for most music Pop, rock, country, electronic and more

“BALANCED”
Even sound with no additional sound enhancements

BEST FOR
Podcasts, Audiobooks Classical music

“BASS BOOST”
Amplified bass and sub-bass

BEST FOR
Working out, sport and fitness Hip hop, rap, electronic

“CUSTOM”
Customize your EQ through the JLab App

MULTIPOINT (connect 2 devices simultaneously)

1. Once FIRST device is connected, turn off Bluetooth in device settings. Earbuds will auto enter Bluetooth Pairing.
2. Enter your SECOND device Bluetooth settings and connect to Buds Air Pro ANC.
3. Enter your FIRST device Bluetooth settings. Turn on Bluetooth and connect to JLab JBuds Air Pro ANC.

Caution FCC Statement for Users
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

If you cannot eliminate the interference, the FCC requires that you stop using your product. Changes or Modifications not expressly by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

CAN ICES-003(B)/NMB-003(B)
This device contains licence-exempt transmitters)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s This Product meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of this Device (FCC ID: 2AHYV-JAPNC) has been tested against this SAR limit. This device was tested for typical operations 0mm from the body.

Operation is subject to the following two conditions:

• (1) this device may not cause harmful interference
• (2) this device must accept any interference received, including interference that may cause undesired operation.

ISED RSS-102 Radiation Exposure Statement
This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment.

SAR Rating
Bluetooth Transmitter Power max: ≤ 5 dBm

Frequency Range
2402 MHZ – 2480 MHZ

Instructions for Users on Removal, Recycling and Disposal of Used Batteries
To remove the batteries from your equipment or remote control, reverse the procedure described in the owner’s manual for inserting batteries. For products with a built-in battery that lasts for the lifetime of the product, removal may not be possible for the user. In this case, recycling or recovery centers handle the dismantling of the product and the removal of the battery. If, for any reason, it becomes necessary to replace such a battery, this procedure must be performed by authorized service centers. In the European Union and other locations, it is illegal to dispose of any battery with household trash. All batteries must be disposed of in an environmentally sound manner. Contact your local waste-management officials for information regarding the environmentally sound collection, recycling and disposal of used batteries.

WARNING: Danger of explosion if battery is incorrectly replaced. To reduce risk of fire or burns, don’t disassemble, crush, puncture, short external contacts, expose to temperature above 60 C (140 F), or dispose of in fire or water. Replace only with specified batteries. The symbol indicating ‘separate collection’ for all batteries and accumulators shall be the crossed- out wheeled bin shown below:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>