Lexman LDSENK18 Wireless Smart Motion Sensor Instruction Manual

June 14, 2024
lexman

Lexman LDSENK18 Wireless Smart Motion Sensor

IMPORTANT: This product requires an ENKI box to operate.

WHAT’S INCLUDE

START UP

  • Step 1
    Open the ENKI app and log in.

  • Step 2
    In the “my objects” tab, click on the “+” button.

  • Step 3
    Select the LEXMAN brand and choose the product from the list.

  • Step 4
    Follow the instructions described on the application screens. The ENKI box will automatically recognize your object.

Product description

The motion sensor allows you to know when a motion is detected in its detection area and can, using a scenario, trigger different actions in response to this movement.

CHARACTERISTICS & CAPABILITIES

  • Pets immunity up to 25 kg.
  • Easy to install with a stand, or to place on a piece of furniture.
  • Alert via app, low battery
  • Equipped with an anti-tearing switch that signals the removal of the sensor from its holder.
  1. Reset/pairing:
    Press and hold the reset button for 3 seconds and then release the button to reset the sensor.

  2. LED indicator:
    If the sensor has not been associated to your ENKI box, the LED indicator will flash approximately once per second. The LED indicator will switch off when the sensor is successfully associated to your ENKI box.

DIMENSION

INSTALLATION

  1. Please choose the installation location on the wall ” for this see the following section: installation position and notes”. Secure the holder with screws or adhesive tape.
  2. Remove the insulating film from the battery at the back of the detector.
  3. Mount the main body on the support.

Lexman-LDSENK18-Wireless-Smart-Motion-Sensor- \(3\)

INSTALLATION POSITION AND NOTES:

  • Detection zoneLexman-LDSENK18-Wireless-Smart-Motion-Sensor- \(4\)

The detection of pets can vary according to the ambient temperature, the body shape of the animal, the fitting height of the sensor … In most cases, we have measured that an animal on the ground of less than 60 cm high and less than 25 kg is not detected within 8 m of the detector.

SPECIFICATION

  • Detection angle: 80 degrees
  • Detection distance: 8 meters
  • Pet immune: 25 kg
  • Mounting height: 1.9 m & 2.3 m
  • Maximum radio transmission: 20 dBm
  • Frequency band: 2405 – 2480 MHz
  • Battery life: 3 years / 20 detections / day
  • Anti-Tamper: YES
  • Operating temperature: 0°C = 40°C
  • Operating humidity: Up to 85% non-condensing
  • Storage temperature: -20°C ~ 60°C
  • Sensing Technology: Infrared

SAFETY WARNINGS

  • If you need to clean the product, use a soft cloth.
  • This product should only be used indoors.
  • Remove the battery and keep it in a safe place if you do not use this product for a long period of time.
  • Do not ingest the battery, risk of chemical burn.
  • This product contains a lithium battery.
  • If the battery is swallowed, it can cause severe internal burns in as little as 2 hours and can lead to death.
  • Keep new and used batteries out of the reach of children.
  • If the battery compartment does not close properly, stop using the product.
  • If you suspect that batteries may have been swallowed or placed inside the body, seek medical attention immediately.
  • Danger of explosion if battery is placed incorrectly.
  • Replace the battery only with a battery of the same type. type or equivalent.
  • The battery must not be exposed to excessive heat such as sunshine, fire or the like.
  • Avoid installation near air conditioners, fans, refrigerators, ovens, or other places where the temperature changes rapidly.
  • In order not to affect the detection performance, there should be no objects in front of the lens.
  • Any material between the product and the ENKI box reduces the operating distance (mainly: reinforced concrete wall, concrete wall, metal surfaces). Take this into account when defining the positioning of your sensor.

BATTERY REPLACEMENT

Disposal
Electrical products must not disposed of out with domestic waste. They must be taken to a communal collecting point for environmentally friendly disposal in accordance with local regulations. contact your local authorities or stockist for advice on recycling. The packaging material is recyclable. Dispose of the packaging in an environmentally friendly manner and make it available for the recyclable material collection-service. Don’t throw batteries or out of order products with the household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make vour retailer take back these products or use the selective collect of garbage proposed by your tv.

EU Declaration of conformity

Lexman-LDSENK18-Wireless-Smart-Motion-Sensor- \(6\)

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

lexman User Manuals

Related Manuals