kogan KAMN34FXQULA 24″ Curved Freesync Gaming Monitor User Guide

: June 7, 2024
: Kogan

kogan KAMN34FXQULA 24″ Curved Freesync Gaming Monitor

Product Image

Safety and Warnings

Read all instructions before using the appliance and retain for reference .

Unplug the monitor before cleaning it with a slightly damp, clean
Wiping the screen once it has been turned off with a dry microfibre cloth is recommended .
Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
This monitor is designed with ventilation holes on the back of the Do not cover or block them.
Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as well as in rooms lacking in adequate
Do not insert any objects or spray any liquids into the
Do not position the monitor in unsafe If the monitor falls, it may be damaged and may injure nearby people.
Unplug the monitor if it is not going to be used for an extended
Do not place heavy objects on the monitor, its power cord or any connected cables.
Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in

Components

Monitor
Stand Stem
Stand Base
Bracket trim cover
PM4*12mm Screws (x 3)
VESA connectors ( x 4)
Power Adapter
DP Cable (1.5m)
User Guide

Overview

Monitor Control

Menu Button: Press to display the OSD menu or enter sub-menus.
Down Button: Press to move down in the menus.
Up Button: Press to move up in the menus.
Exit Button: Press to exit.
Power Button: Press to turn the monitor on/off.
LED Indicator: Change colors to indicate status.

Monitor Ports

Audio Output: Insert one end of the Audio cable into the computer’s Audio output to receive the Audio signals from your monitor.
HDMI Connector: Insert one end of the HDMI cable into the computer’s HDMI output and connect the other end to the monitor’s HDMI port.
DP Connector: Insert one end of the DP cable into the computer’s DP output and connect the other end to the monitor’s DP port.
Power Connector: Insert the power cable to supply power to the monitor.

Assembly

Open the package, take out the product with foam still attached, and gently place it on a desktop or table.
Take out the bracket and base and lock them together with a screw.
Take off the upper foam, lock the assembled base with a screw on the back shell fixed base bracket.
Take out the bracket decorative cover from the accessory bag and install it into the bracket fixing hole.
Use both hands to stand the assembled machine on a flat desktop.

Note: Do not directly press and hold the LCD screen with your hand during the whole machine’s erection to prevent the screen from breaking.

Wall Mounting

Open the carton, remove the foam, remove the upper foam and remove the decorative cover of the shaft.
Lock the two 27.5mm VESA screws in the upper two holes on the rear of the monitor, and the two 17mm VESA screws in the lower two holes.
Your monitor is now ready to be attached to a wall-mounting bracket. To avoid damage, please do not pinch the screen during bracket installation.

Connectivity

Removable Rear Panel

This monitor features a removable rear panel that covers the input ports. It may be easier to remove this panel before attempting to connect or remove cables from the monitor.

Power Cable

Connect the included power cable to the power connector, and then plug the other end into power outlet.

Earphones

Plug in your earphones to receive audio signals from your monitor. If your earphones are connected to the monitor and audio devices are connected to your computer at the same time, the audio devices will not produce sound. Earphones are other audio devices not included.

DP

In order for the monitor to receive DP signals from the computer, use the DP cable to connect the monitor to the computer.

HDMI

In order for the monitor to receive HDMI signals from the computer, use the HDMI cable to connect the monitor to the computer.

Operation

Insert one end of the DP cable into your PC’s graphics card. A HDMI cable may also be used. A HDMI cables is not included.

Connect the other end of the cable to the corresponding connector on your monitor.
Connect the power cable to your monitor then connect the other end to your power source. It is recommended that you use a surge protector with adequate voltage if a wall outlet cannot be reached directly.
Locate the power button on the monitor and press it to turn the monitor on.

Indicator Light

Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light indicates no video source. No horizontal or vertical signal has been detected. Please ensure your computer is on and all video cables are fully inserted and / or connected.

The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and appears on screen after turning on the monitor and pressing the M button.

1. Press any one of the buttons to activate the navigation window.

Press M to enter the OSD menu.
Press Tor Ato browse

  * Highlight the desired function, then press **M** to enter the sub-menu.
  * Press Up/Down buttons to **** browse sub-menus, then press **M** to highlight the desired function.
  * Press Up/Down buttons to **** highlight an option, then press **M** to confirm the settings and exit the current screen.

Press E to exit the current screen.

List of Functions

Main Menu

|

Sub-Menu

|

Option

|

Description

---|---|---|---
BRIGHTNESS| Brightness| 0~100| Adjust display brightness
Contrast| 0~100| Adjust display contrast
ECO| Standard, Game, RTS, FPS, Movie, Text| Set visual mode
DCR| On| Turn on DCR function
Off| Turn off DCR function
IMAGE| Aspect| Wide, Auto, 4:3| Set aspect ratio
COLOR TEMP.| Color temp.| Warm, User, Cool,| Adjust color temperature
Red| 0~100| Customize RGB components
Green| 0~100
Blue| 0~100
OSD SETTING| Language| Multiple Languages| Set OSD language
OSDH. POS.| 0-100| Adjust the OSD horizontal position
OSDV.POS.| 0-100| Adjust the OSD vertical position
OSDTimer| 0~60| Set how long the OSD remains open after non-use
Transparency| 0-100| Set the OSD overall transparency
RESET| Reset| N/A| Reset monitor configurations
MISC| Signal source| HDMl1, HDMl2, DP| Display the input signal
Volume| 0-100| Adjust audio volume
Low blue ray| 0-100| Set blue light filtering level
FreeSync| On, Off| Turn on/off FreeSync

Display Modes

Press any one of the buttons to activate the navigation window.
Press Down button to switch Gameplus modes. According to the needs of your game, choose the corresponding game icon. These game icons are primarily designed to optimize your aim during shooting games, though they can be used for other scenarios.
Press UP button to switch ECO modes. These modes include Standard, Text, Movie, Game, FPS and RTS modes and can be used to optimize settings according to your activity. Standard mode is suitable for most activities.

Specifications

Model	KAMN24FXCLA
Screen Size	24″
Aspect Ratio	16:9
Backlight	E-LED
Brightness	300 cd/ m2
Panel	VA
Resolution	1920×1080
Refresh Rate	144Hz
Response Time	5ms
Viewing Angle	>178° (H) />178°(V)
Contrast Ratio	3000:1
VESA Mounting	75×75
Colours	16.7M
FreeSync	YES
Signal Input	DP1, HDMl1.42
Power	DC 12V =–=-= 3.0 A

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com