COMMSCOPE EQ-P0812-B-RC-P Rain Canopy Owner’s Manual
- September 11, 2024
- CommScope
Table of Contents
COMMSCOPE EQ-P0812-B-RC-P Rain Canopy
Specifications
- Name: 08’X12′ Rain Canopy, on EQ. Platform
- Dimensions: Height 139.8″, Length 148.0″, Width 101.6″
- Weight: 756.22 lbs (mass), Volume 2672.96, Surface Area 72702.42
Product Usage Instructions
General Notes
- All metric dimensions are in brackets [X. X]
- For patent info: https://www.cs-pat.com
Design Notes
Prior to installing the appurtenance, identify any hazards or obstructions to the climbing facility and safety climb. Additional products may be required to maintain integrity. During installation, take temporary and/or permanent precautionary measures to preserve the climbing facility and/or safety climb.
Manufacturing/Special Requirements
Tighten all bolts securing flat plates using the turn-of-nut method. Tighten all U-bolts using the turn-of-nut method, ensuring equal distance and force on each leg of the U-bolt.
Packaging
- Packaging shall meet CommScope requirements per document IS-PL-3005
- Printed document to be placed inside polybag and then in shipping container
- Extra hardware may be supplied, bagged, and shipped
FAQ
- Q: How should I tighten the bolts for this product?
- A: Secure flat plates using the turn-of-nut method and U-bolts with attention to equal distance and force on each leg.
- Q: What precautions should I take during installation?
- A: Identify any hazards or obstructions, and ensure additional products are used to maintain safety climb integrity.
- Q: Where can I find patent information for this product?
- A: You can find patent info at https://www.cs-pat.com.
GENERAL NOTES
- ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X]
- FOR PATENT INFO: https://www.cs-pat.com
DESIGN NOTES
- ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
MANUFACTURING/SPECIAL REQUIREMENTS
- TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
TEST
PACKAGING
- PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005
- PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER
- EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED
Dimension
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES
COMPONENT PART
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>