JENSEN JHD12 Digital Media Receiver Instruction Manual
- June 1, 2024
- Jensen
Table of Contents
JENSEN JHD12 Digital Media Receiver
Specifications
- Model: J HD12
- Part Number: JHD12
- Channels Stored: Up to 30 (6 channels per band FM1, FM2, FM3, AM1, AM2)
- Bluetooth: Yes
- Clock: Yes, always displayed at the top
Product Usage Instructions
- Power Controls
- POWER: Press to turn ON. Press again to switch the Dimmer (On/Off). Press and hold to turn off and enter standby mode.
- Audio Controls
- VOLUME: Press the VOLUME UP button to increase volume. Press the VOLUME DOWN button to decrease volume.
- PLAY/PAUSE: Press to Mute/Pause audio, and press again to resume the audio volume.
- Tuning Controls
- TUNE/SEEK: Press the H or H buttons to seek to the next strongest station. Press and hold Hor H to start the manual tune mode.
- Bluetooth Pairing
- PAIR DEVICE VIA BLUETOOTH: Make sure the device you intend to pair with is on and Bluetooth is enabled. Press & hold to start the pairing process.
- Clock Setting
- CLOCK SETTING MENU: Press & hold to enter menu. Navigate to CLOCK SET. Use the M or M buttons to adjust the setting.
Basic Operation
AM/FM Tuner Controls
Weatherband Tuner Control
Bluetooth Operation
Clock Operation
For owner’s manual, please visit:http://www.asaelectronics.com/manuals- guides or scan this QR code.
Part Number : JHD12
- IMPORTANT OWNER’S MANUAL INFORMATION
- Owner’s Manuals are made available at the following website: https://www.asaelectronics.com/support/
ELECTRONICS …
2802 Merine Drive
Elkhart. IN 48514
www.esaelectronlca.com
FAQ
How many channels can be stored on the JHD12?
Up to 30 channels can be stored, with 6 channels per band (FM1, FM2, FM3, AM1, AM2).
How do I pair a device via Bluetooth?
To pair a device via Bluetooth, ensure the device is on and Bluetooth is enabled. Press and hold the PAIR button on the JHD12 to start the pairing process. Follow the on-screen instructions on your device to complete the pairing.
How do I adjust the clock settings?
To adjust the clock settings, press and hold the CLOCK button to enter the menu. Navigate to CLOCK SET using the M or M buttons. Press ENTER to select. Use the + or - buttons to adjust the settings.