HAOQIN TS03 Smart Watch User Manual

June 5, 2024
HAOQIN

HAOQIN-LOGO

HAOQIN TS03 Smart Watch

Downloading the App

Scan the following QR code, download, and install the App.

HAOQIN-TS03-Smart-Watch-FIG-1

Charging and Active

HAOQIN-TS03-Smart-Watch-FIG-2

Charging the device to active before the first time using; To charge your device, plug the charging cable into the adapter or USB port on your computer.

Pairing

HAOQIN-TS03-Smart-Watch-FIG-21

The MAC address on the “Setting”-“About” page could help you identify your device on the scanning list

Use the Touch Screen

HAOQIN-TS03-Smart-Watch-FIG-3

SmartWatch Features

Sleep
If you keep wearing Smart Watch in your sleep, it can provide the hours slept and quality of sleep stats on Nboth the screen and the APP.
NOTE: Sleep stats reset to zero AT 8:00 pm.

Heart Rate Test
The SmartWatch could record your heart rate all day. You also could tap on the page to start measuring heart rate.

Sports
Smart Watch automatically tracks Steps taken on the screen.
NOTE: Your movement stats reset to zero at midnight.

Training
Tap the training icon on the menu to start a new training measure recording, there are 8 sport modes to be chosen. The last training recording will be shown on the training page.

Blood Pressure Test
Tap on the blood pressure page to start measuring your blood pressure. On the blood pressure page, It can show the blood pressure measurement data of the last times.

Sp02 Test
Tap the SpO2 page to start measuring your SpO2. On the SpO2 page, It can show the SpO2 measured data of the last times.

Weather
It could show the weather info of current and tomorrow on the weather page. Weather info is synced after connecting with the APP, it will not be updated after a long disconnected.

Messages Reminder

The device can sync incoming notifications from Twitter, Facebook, Whatsapp, Instagram etc. Recently 5 messages can be stored.
Note: You can switch/off the incoming notification in the APP.

Remote Shutter
After connecting the device, you can remote contra! the camera on your phone.

Player Shutter
After connecting the device,you can remote control the music player on your phone.

Other Features
Other features include a stopwatch, alarm, timer, and brightness. mute on/off, theater mode, factory reset, power off, and about.

Stop Watch
Tap the start button on the stopwatch page to start timing, and tap the stop button to stop timing.

Silent Alarms
Set up the alarm on the APP, the device will vibrate to remind on time.

Theater Mode

The device will turn off the vibration and turn down the brightness when the theater mode is turned on.
Note: You can turn on/off the theater mode in the control center.

Remind to Move

The device will vibrate to remind you to make relax after 1 hour of sitting.
Note: You can switch on/off the feature in the APP.

Remind to Drink
The smartwatch will remind you of ”Time to Drink Some Water” at the planned drinking time.
Note: You can set the feature in the APP.

2048 gameHAOQIN-TS03-Smart-Watch-FIG-20
2048 game has a total of 16 squares, the initial number is composed of 2 or 4.

  1. Fingers slide in one direction, and all grids move in that direction.
  2.  When two grids with the same number collide, the numbers will be added.
  3. Each time you slide, a number of squares will be randomly refreshed in the blank.
  4. When the interface is motionless (when the interface is full of numbers), the game ends; when the maximum number in the interface is 2048, the game wins.

Getting to Know Your Device

  1. Using in Wet Conditions
    Your device is water-resistant, which means it is rain-proof and splash- proof and can stand up to even the sweatiest workout.
    NOTE: Do not swim with your Smart Bracelet. We also don’t recommend showering with your wristband; though the water won’t hurt the device, wearing it 24/7 does not give your skin a chance to breathe. Whenever you get your bracelet wet, dry it thoroughly before putting it back on.

  2. Using Quick View
    With Quick View, you can check the time or the message from your phone on your Smart Bracelet without taping. Just turn your wrist towards you and the time screen will appear for a few seconds.

General Info & Specifications

  1. Environmental Conditions
    Operating temperature: 14°F to 122°F (-10°C to 50°C) Non-operating temperature: -4°F to 140°F (-20°C to 60°C)

  2. Size
    Fits a wrist between 5.5 and 7.7 inches in circumference.

  3. Disposal and Recycling
    Please kindly be aware that it is the consumer’s responsibility to properly dispose of and recycle Smart Bracelet and accompanying components. Do not dispose of Smart Bracelet with common household waste, the Smart Bracelet unit is considered electronic waste and should be disposed of at your local electronic equipment collection facility.

For more information, please contact your local electronic equipment waste management authority or the retailer where you bought the product.

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals