kogan KAMN32QF7TA 32″ QHD IPS Freesync Frameless Monitor User Guide

June 7, 2024
Kogan

Kogan-Logo.png USERGUIDE
32″QHDIPSFREESYNC FRAMELESS MONITOR
(75Hz2560x1440)
KAMN32QF7TAkogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor
-

Safety and warnings

Read all instructions before using the appliance and retain them for reference.

  1. Unplug the monitor before cleaning it with a slightly damp, clean cloth.
  2. Wiping the screen once it has been turned off with a dry microfibre cloth is recommended.
  3. Do not use cleaning alcohol, ammonia-based liquids, or other harsh cleaners.
  4. This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
  5. Avoid placing the monitor near heaters, stoves, fireplaces, or other sources of heat, as well as in rooms lacking inadequate ventilation.
  6. Do not insert any objects or spray any liquids into the vents.
  7. Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and may injure nearby people.
  8. Unplug the monitor if it is not going to be used for an extended period.
  9. Do not place heavy objects on the monitor, its power cord, or any connected cables.
  10. Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in.

COMPONENTS

kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor -
COMPONENTS

A Monitor
B Stand Stem
|C Stand Base
D M4 xl0mm Screws (x 4) M5 xl0mm Screws ( x 1 )| E Power Adapter
F HDMI Cable
G User Guide
---|---

  1. Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged. Fix the stand body to the back of the monitor with the screws.
    kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor - COMPONENTS
1

  2. Fix the stand base to the stand body by tightening the screw.
    kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor - COMPONENTS
2

  3. Attach the cover plate by pressing it onto the stand body.
    kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor - COMPONENTS
3

ADJUST THE ANGLE

kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor -
DRAWING

  1. Drawings are for reference only and please refer to the actual monitor.
  2. The angle of the  screen con be adjusted forward 5° or backward 15° for a comfortable viewing experience
  3. Be careful not to touch or press the screen area when adjusting the angle of the monitor.

WALL MOUNTING

Before installing the monitor on the wall, please detach the stand from the monitor.

  • To ensure sufficient ventilation, Install the monitor at least 10 cm (4 inches) away from the wall and leave about 10 cm of space at each side of the monitor.
  • Please consult a professional technician for wall mount installations. The manufacturer accepts no liability for installations not performed by a professional technician.
    kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor -
WALL
  1. Place a clean, dry, and lint-free cloth on a flat, stable surface.
  2. Gently lay the monitor on the cloth with the LCD screen facing down.
  3. Identify the four wall mounting screw holes on the back of the monitor.
  4. Install the wall mounting bracket (not supplied) on the back of the monitor and attach the monitor to the wall according to the mounting bracket’s instructions.
  5. Make sure that all screws (not supplied) are tightened and secured properly.

NOTE:

  • Use the wall mounting bracket and screws that conform to VESA standards.
  • For more information, please refer to the user manual for the wall mounting bracket.
    kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor - WALL
BRAKET

CONNECTIVITY

kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor -
CONNECTIVITY

Before connecting the liquid crystal display to your PC, please shut off the powers for the PC and the display.

Power Cable

Connect the included power cable to the power connector, and then plug the other end into a wall outlet.
kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor -
POWER

DP
In order for the monitor to receive DP signals from the computer, use the DP cable to connect the monitor to the computer.

kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor -
DP

HDMI
In order for the monitor to receive HDMI signals from the computer, use the HDMI cable to connect the monitor to the computer.
kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor -
HTMI VGA
In order for the monitor to receive VGA signals from the computer, use a VGA cable to connect the monitor to the computer.
kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor -
VGEA Earphones
Plugin your earphones to receive audio signals from your monitor. If your earphones are connected to the monitor and audio devices are connected to your computer at the same time, the audio devices will not produce sound. Earphones and other audio devices are not included.

kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor -
EARPHONE

OPERATION

Insert one end of the HDMI cable into your PC’s graphics card. A VGA cable may also be used. A VGA cable is not included.

  1. Connect the other end of the cable to the corresponding connector on your monitor.
    kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor -
OPERATION

  2. Connect the power cable to your monitor then connect the other end to your power source. It is recommended that you use a surge protector with adequate voltage if a wall outlet cannot be reached directly.

  3. Locate the power button on the monitor and press it to turn the monitor on.

FreeSync
The feature itself is on by default when setting a 75Hz refresh rate. In order to use this feature, please note you must have hardware with FreeSync capability, an HDMI cable, and the latest graphic drivers. To use this feature, connect your computer and monitor with an HDMI cable. After connecting, you may receive a prompt to enable the feature on your computer. If you do not receive the prompt, you may need to enable the function in your graphics card menu. See your graphics card manufacturer’s documentation for instructions on how to turn on and/or enable FreeSync.

USER CONTROLS

You can easily control the functions of the monitor by pressing the joystick button or moving it left / right with your finger.

kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor - CONTROL
BUTTON

  1. E Exit Button: Press to exit.
  2. **M Menu Button:** Press to display the OSD menu or enter sub-menus.
  3. **Up Button:** Press to move up in the menus.
  4. Down Button: Press to move down in the menus.
  5. Power Button: Press to turn the monitor on/off.

OSD MENU

kogan KAMN32QF7TA 32QHD IPS Freesync Frameless Monitor -
LUMINANCE

  1. To view the OSD menu, press the joystick button at the back of the monitor.
  2. Configure the options by moving the joystick up/down/left/right.
  3. To return to the upper menu to set other menu items, move the joystick right. 4. If you want to exit from the OSD menu, move the joystick right until you exit.
Main Menu Sub- Menu Options Description
Luminance Brightness 0-100 Adjust display brightness
Contrast 0-100 Adjust display contrast
Eco Mode Standard, Movie, RTS, FPS, Game, LowBlue Set visual mode
DCR On, Off Turn DCR function on/off
Overdrive On, Off Turn overdrive function on/off
Image Setup H. Position 0-100 Adjust the horizontal position
V.Position 0-100 Adjust the vertical position
Color 0-100 Adjust the color setting
Phase 0-100 Adjust the clock phase values
ImageRatio Wide, 4:3 Set aspect ratio
Color Setup Color temp. Worm, User, Cool, Normal Adjust color temperature
--- --- --- ---
Red 0-100 Customize RGB components
Green 0-100
Blue 0-100
OSD Setup Language English, Turkish,

Magyar, EThriv LK°,
El 21KM, friarP3t, ItiarPt, V•q.01,
Cestina, Svenska. Polski, Suomi, Pyc., Nederlands, Italian, Deutsch, Portugues,
Espanol, Francais| Set OSD language
H. position| 0-100| Adjust the horizontal position
V. position| 0-100| Adjust the vertical position
Timeout| 0-120| Set how long the OSD remains
Transparency| 0-100| Adjust the OSD transparency value
| Auto Config.| N/A| Enables this feature to automatically adjust the HIV position, Focus, and Clock of the picture.
Auto Color| N/A| Enables this feature to automatically set the color. Restores the default settings.
Reset| N/A| Reset monitor configurations
| Input Select| VGA, DP, HDM I| Display the input select
Mute| On, Off| Turn the mute function on/off
Volume| 0-100| Adjust audio volume
Freesync| On, Off| Turn Freesync on/off

SPECIFICATIONS

Model KAM N32QF7TA
Screen Size 32″
Aspect Ratio 16:09
Backlight E-LED
Brightness 250cd/m2
Panel IPS
Resolution 2560×1440
Refresh Rate 75Hz
Response Time 5ms
Viewing Angle ;3:178 Q(H) / ?:178°(V)
Contrast Ratio 1200:1
VESA Mounting 100×100
Colors 1.
FreeSync YES
Signal Inpt VGA1, DP1, HDMI1.4*1
Power DC 12V = 4A

Audio
Speakers| NO
Audio Out| YES
|
Accessories
Adapter| YES
HDMI Cable| YES
|
Additional Functions
Low Blue Light| YES
Flicker-Free| YES
|
Physical Dimensions
Dimensions (w / Stand )| 713 x182.1x 495.7mm
Dimensions (w / o Stand )| 713×34.6×412.1mm
Net Weight| 5.3kg
Gross Weight| 8. 1 kg

NOTES




Need more information?
We hope that this user guide has given you the assistance needed for a simple setup.
For the most up-to-date guide for your product, as well as any additional assistance you may require,
head online to help.kogan.com

Kogan-Logo.png

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals