Tribit TS-BTS20 Portable Wireless Speaker User Manual

Tribit TS-BTS20 Portable Wireless Speaker User Manual

Safety instructions

• Avoid droppirg.
• Do not disassemble.
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Do not use any corrosive cleaner/Oil to dean.

Specification

Bluetooth version : Vb 0
Support A2DP: AVRCP. HFP, HSP
Output power: 2 x 8W Battery: 17V, 4400mAh
Battery charge time: 5 hour
Input: DC5W1A
Dimension: 175 x 59 x 56 (mm)
Weight: 380g

What’s in the box

• XSound Go
  

• USB-C Cable
  

• Lanyard
  

• User Manual
  

• Overview buttons & Indicators
  

• Connections
  

• Bluetooth connections
  

Stereo Mode

1. Make Sure both speakers are on.
   • 
   • 
2. Press on one of the speakers to enter pairing states.
3. Press on the other speaker for 5s, then release the button to enter Stereo pairing when you hear the “Stereo Mode”.
   When you hear “Left chanel” on the left speakers and “Right chanel” on the right speaker , the “Stereo mode” is on.

Buttons

Press to play/pause Music and answer/end call

Long press to reject a call

Press twice to skip to next track

Press triple to skip to Previous Track

Indicator

required
Red Indicator flashes quickly| Low battery power (<2%) and will automatically power off after 5s charge the speaker immediately

Reset

Reset If this speaker has some problem, you can try to press and hold “Volume +” and “Volume -” button simultaneously for 5 seconds to reset, and then pairing again (delete the old pairing in your device).

FCC Statement

FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• RF warning for Mobile device: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Customer Service

Customer service

18-month limited warrant

• For FAQS and more information, please
• Email to: support@tribitaudio.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>