Umidigi Uwatch 2S User Manual
- June 7, 2024
- Umidigi
Table of Contents
Uwatch 2S
Operating Instructions
WWW.umidigi.com
Please read the instructions carefully and keep it safe.
THANKS FOR CHOOSING UMIDIGI
Thanks for choosing UMIDIGI products! We will always focus on innovation and
continue to provide high-quality smart devices for a better user experience.
Please leaves us a review of feedback if you like it, we do appreciate it.
Follow UMIDIGI:
|
Facebook:facebook.com/umidigi.
---|---
|
Instagram:instagram.com/umidigi.
UMIDIGI is a registered trademark by Shenzhen Youmi Intelligent Technology
Co., Ltd. All other trademarks are the property of their respective owner.
Visit www.umidigi.com for more information.
Operating Instructions
Key definition
HOME, long press for three seconds to display the model/version number/
Bluetooth address, and then long press for three seconds to display shutdown/
factory reset/cancel.
Normal shutdown, press, and hold for three seconds to boot. Return to the
previous menu function
Instruction for Use
Charging schematic
Connect and charge the watch according to the picture.
It needs to be charged to activate the watch when it is started for the first time.
Tip: Wearing too loosely may affect the accuracy of heart rate data.
Bind Watch
Download and install App
You can set up the watch through the Da Fit app for iOS or Android devices.
The steps are shown as follows: Notes: The hardware platform of the equipment
system shall meet requirements.
Correct operation:
Scan the QR code below or download the Da Fit app with the watch through the
mobile app store.
http://plus.crrepa.com/app-download/dafit
The wrong operation: Pair the watch directly with the Bluetooth in your mobile phone’s settings.
Bind process
|
---|---
①please charge to activate the watch before you use it.| ②In the watch, enter
the Settings-about watch View Bluetooth address.
Bind Watch
| ③Turn on
Bluetooth On your phone
④Open the APP and add
a device.
---|---
| ⑥The mobile APP
and the watch is successfully connected
| ⑤Select product
model:
Uwatch 2S
| ⑦Exercise/sleep
information
Notes:
- During the binding process, “Da Fit” will prompt you to enable GPS and Bluetooth, and authorize “Da Fit” to get access to the GPS on your mobile phone.
- After binding the Apple phone, you need to pair the Uwatch 2S watch with the phone’s Bluetooth so that the watch can provide various information.
Main interface operation
Swipe the screen to enter differently
**Function Introduction
**
| Enter the sports menu, you can choose differently
sports mode.
---|---
| A single heart rate measurement that monitors your heart rate data. The APP
has a continuous heart rate measurement switch.
| Real-time display of weather and temperature in the area.
| After connecting the
device can remote control the camera on your phone.
| For information,
promptly set it in the APP in advance to display synchronously.
| Control music play on your mobile phone (watch cannot store music).
| replacement and custom dial.
| With timing function.
| Turn on the lookup ringtone alert.
| You can turn off/restore the watch in the settings and
adjust the screen brightness.
Notes: For more functions and operations, please check the Da Fit software of the mobile phone.
Start sports
-
Enter sports
Click the sports icon select the sports type > enter the sports countdown automatically -
During sports
Pause exercise: swipe right to stop and resume exercise click to resume exercise or stop exercise -
Stop exercise: Remind whether to end this exercise Select Yes.
Heart rate test
Note :
Please wear the strap tightly to test accurately when testing heart rate.
Product Parameters
Model|
Uwatch 2S
| Screen type| 1.3-inch color screen
---|---|---|---
Battery capacity| 280mAh| Charging voltage| 5V±0.15V
Charging time| about 2.5 hours| Battery life| 7-15days
Waterproof level| 5ATM| Weight of product| 44g
Operating temperature| -20℃-45℃| Bluetooth version| BLE 5.0
GPS| No| sensor|
Accelerator sensor Geomagnetic sensor Optical heart rate sensor
Range of charging temperature: 10- 45 Battery life: Actual battery life and charging time will vary depending on usage and environment, etc.
Waterproof: Not suitable for diving, swimming in the sea, or sauna. But suitable for swimming in swimming pool or in the shower (cold water) and shallow beach.
Cleaning and Maintenance
It is recommended to wear and maintain according to the following three points:
- Keep the product clean;
- Keep the product dry;
- Do not wear it too tight.
- Do not use household cleaners to clean the watch, but use the soap-free detergent.
- It is recommended to use alcohol to scrub stains that are not easy to remove.
Frequently Asked
-
Mobile APP search for the watch failed It is recommended to restart Bluetooth after restarting
the phone, and then connect. Confirm whether the mobile phone system meets
Android 4.4 or IOS 8.0 or above. -
The watch received no alerts, text messages You need to turn on the smart reminder function and the call reminder switch in the APP, and synchronize to the watch. The phone needs to be paired with the watch via Bluetooth. You need to keep your watch connected to Bluetooth.
Frequently Asked -
Bluetooth is often disconnected If the distance between the watch and mobile phone is too far, the connection effect of more than 10m Bluetooth is obviously weakened. If there is a shield between the watch and the cellphone phone, the human body, wear metal jewelry, etc. interferes with the Bluetooth connection signal. If the Bluetooth function of the cell phone is abnormal.
-
How to reboot: reboot mode: long press the HOME button for 3 seconds twice, requires shutdown/reboot/cancel, select reboot. Do
-
I need to keep Bluetooth on when wearing my watch? For the three functions, namely counting steps, sleeping, and alarm clock, it is not necessary to always connect the watch to the mobile phone. If you only need to wear a watch while exercising, you can connect the watch and phone mobile phone to view data synchronously after exercise. For Call Waiting, Message Waiting, find the phone, you need to activate the Bluetooth of the mobile phone and maintain the connection with the mobile phone.
-
How to set the clock time After opening the APP, opening the Bluetooth, and connecting the clock, the time will be synchronized automatically.
You can answer more detailed questions with the help feedback in the APP.
Safety and Product Information Notes
Warning
Battery warning
Do not disassemble, bore, or damage the battery.
Do not disassemble the built-in batteries of non-replaceable battery devices.
Do not use sharp objects to remove the battery.
Health Warning
If you are wearing a pacemaker or other implanted electronic devices, please
consult your doctor before using the heart rate monitoring strap.
The optical heart rate sensor of the watch glows green and blinks.
If you have epilepsy or are sensitive to flashing light sources, please
consult your doctor if you can wear this product.
The device tracks your daily activities through sensors. These data are
intended to tell you about your daily activities. such as steps, sleep,
distance, heart rate, and calories, but may not be completely accurate.
The device, accessories, heart rate sensors, and other relevant data are
designed for entertainment and fitness, not for medical purposes. They are not
applicable to the diagnosis, monitoring, treatment, or prevention of any
diseases or symptoms. The heart rate data is for reference only. We are not
responsible for
any consequences caused by any data deviation.
Safety and Product Information Notes
Cycling Warming Please maintain good judgment at all times and ride in a safe
manner. Make sure your bike and hardware are properly maintained,.The watch
has no waterproof effect on seawater, acidic and alkaline solutions, chemical
reagents, and other corrosive liquids. The damage or defects caused by misuse
or improper use are not covered by the warranty. Avoid wearing the watch too
tight in daily use. Please keep the parts of the watch touching the skin dry
when your heart rate is measured, keep your arm still during the test.
Caution
Rise of explosion if the battery is replaced by an incorrect type dispose
of used batteries according to the instructions.
The device meets the EU ROHS criterion. Please refer to IEC 62321, EU ROHS Directive 2011/65/EU and revised directive.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: this device may not cause harmful interference.
(2) this device must accept any interference received, including interference
that may cause undesired operation. Changes or modifications not expressly
approved by the party responsible for compliance could avoid the user’s
authority to operate the equipment. This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: —Reorient or relocate
the receiving antenna. —Increase the separation between the equipment and
receiver. —Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. — Consult the dealer or an
experienced radio/TV technician for help.
Old electrical appliances must not be disposed of together with the residual
waste, but have to be disposed of separately. The disposal at the communal
collecting point via private persons is for free. The owner of old appliances
is responsible to bring the appliances to these collecting points or to
similar collection points. With this little personal effort, you contribute to
recycling valuable raw materials and the treatment of toxic substances.
Follow the UMIDIGI community.a place where you can share and discuss with UMIDIGI users keep posted with the most up-to-day news.
Manufacturer: Shenzhen Youmi Intelligent Te technology Co., Ltd.
Add:406-407 Jinqi Zhigu Building,4/F,1 Tangling.Road, Nanshan District,
Shenzhen City, China.
Amazon service Email:
amazonservice@umidigi.com.
Made in china
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>