TAOTRONICS TT-SK018 Mini Sound Bar User Guide
- June 7, 2024
- TaoTronics
Table of Contents
TAOTRONICS TT-SK018 Mini Sound Bar
Product Diagram
- LED Indicator
- 3.5mm Audio Port
- Microphone Port
- Wall Mount
- Volume Knob
- 3.5mm Audio Cable
- USB Power Cord
Setting up the Sound Bar
- Connect to a 5V / 1A power source.
- Plug in the 3.5mm audio cable into the audio output of your device. Connect the green jack to the audio and pink to the microphone output.
- Make sure the music is at audile level and tune the volume through the Volume Knob.
Note: Plug your headphones into the audio and microphone ports of the sound bar to use with headphones. Please note the sound bar is not built with microphone.
Specifications
| Input | 5V 1A |
|---|---|
| Frequency Response | 50Hz ~ 20KHz |
| Separation | ≥ 40dB |
| S/N | ≥ 70dB |
| Dimensions | 41.7 x 5.3 x 7.3 cm / 16.41 x 2.08 x 2.87 in |
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems) This marking on the
product, accessories or literature indicates that the product and its
electronic accessories
should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for
environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contract. This product and
its electronic accessories should not be mixed with other commercial wastes
for disposal.
E-mail:support@taotronics.com
MANUFACTURER
Shenzhen NearbyExpress Technology Development Co., Ltd.
Address: Floor 7, Building E, Galaxy World Phase II,
Shenzhen, China
www.taotronics.com
E-mail:support@taotronics.com
Learn more about the EU Declaration of Conformity:
https://www.taotronics.com/pages/user-manual
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>