Taotronics proS10 Sound Liberty User Manual
- June 5, 2024
- TaoTronics
Table of Contents
Taotronics proS10 Sound Liberty
OVERVIEW
- Charging Slot
- Charging Indicator
- Reset Button
- USB-C Charging Port
- Charging Contacts
- Microphone
- Multifunction Touch Control
SETTING UP YOUR EARBUDS
Wearing
Charging
We highly recommend that you fully charge the earbuds before using them for
the first time.
- Place the earbuds into the charging case.
- Close the case and connect to any USB charging port with the included cable.
Power ON / OFF
USING YOUR EARBUDS
Bluetooth Caution
- Place the two devices to be connected close to each other and turn off other Bluetooth devices.
- The maximum effective Bluetooth range may vary with the environmental circumstances. Obstacles (walls, fences, etc.) between the two devices may shorten the effective range.
Bluetooth Pairing – Binaural Mode
- Uncover the lid to bring into pairing mode automatically.
- Turn on the Bluetooth function on your device and search for nearby devices.
- Find “TaoTronics S10” in the search results, tap to connect.
- Each time you power on your earbuds, it will automatically connect to your last successfully connected device if available within the Bluetooth range.
- When the earbuds are disconnected from your device for more than 10 minutes, they will turn off automatically.
Bluetooth Pairing – Mono Mode
- When Bluetooth connected, you can use either one of the earbuds as per your preference.
- Take out one earbud, and make sure the other one is placed in the case with the lid covered.
- If you want to change to binaural mode, simply take out the other earbud from the charging case, they will pair with each other automatically.
- Under Mono mode, swiping up or down is changing the volume, no matter which earbud is in use.
Manually Pairing
If you want to pair the earbuds with a new device.
- Place both earbuds back in the charging case with the lid uncovered.
- Press and hold the Reset Button for 3 seconds until the LED indicators on the charging case flash white twice.
- The earbuds will go into pairing modeautomatically.
Resetting Your Earbuds
- Remove “TaoTronics S10” from the Bluetooth device list.
- Place both earbuds back in the charging case with the lid uncovered.
- Press and hold the Reset Button for 10 seconds until the LED indicators on the charging case flash white three times.
- The pairing history will be cleared and the earbuds will go into pairing mode automatically.
CLEANING AND MAINTENANCE
- Wipe only with a dry, soft cotton swab or equivalent.
- Never insert anything into the nozzle.
- Clean the earbuds and the charging case regularly.
- Keep away from sharp objects to avoid scratches.
- Place in a dry and shady place if they are not in use for a long time.
- DO NOT clean with detergent or chemicals.
TROUBLESHOOTING GUIDE
Earbuds fall off easily :
Securely wear the earbuds (see “Wearing”).
Cannot connect with your device :
- Make sure the Bluetooth function is activated before pairing.
- Place the device to be connected close to the earbuds. Move both devices away from other Bluetooth devices.
- Remove the earbuds from the Bluetooth list when already paired before.
- Reset the earbuds and pair again (see “Resetting Your Earbuds”).
Intermittent connection for one of the earbuds
- Make sure there are no obstacles between the two devices.
- Fully charge the earbuds.
- Reset the earbuds and pair again (see “Resetting Your Earbuds”).
Bluetooth disconnected frequently
- Make sure the earbuds are within the effective range of your device. The range may vary with the environmental circumstances.
- Turn off other Bluetooth devices to decrease the interference.
- Remove the earbuds from the Bluetooth list and connect again.
Poor sound quality
- Try in a quiet indoor environment.
- Clear any debris from the earbud nozzles.
- Place both devices close to each other or remove the obstacles between them.
- Try with a different audio source or device.
- For poor call quality, check that the microphone is not blocked or covered
Failed to charge the earbuds/charging case
- Make sure there is no dirt or debris covering the charging contacts on the earbuds or the charging pins in the case.
- Place both earbuds in the charging case properly until they magnetically snap into place.
- Make sure the charging case is fully charged. If charging failed, try with another 5V 1A charger.
Battery life shortened after using for an extended period of time
- For optimal battery life, make sure the earbuds are fully charged.
- The actual battery life may vary with the music type and volume used to some extent. If it is 2 or more hours shorter as described, please contact our Customer Support for replacement.
- The more the number of charge and discharge cycles, the shorter the battery life.
- The more the number of over discharges, the shorter the battery life. Charge the earbuds at least once every 6 months
The troubleshooting guide addresses the most common problems. If problems persist, feel free to contact the Customer Support at support@taotronics.com.