Babevy JY-T08E Baby Tricycle User Manual

Babevy JY-T08E Baby Tricycle

Product Information

Specifications

• Product Name: Baby Tricycle
• Manual Age: 12-60 Months
• Model No: JY-T08E

Product Components (Spare Parts)

• Canopy + cloth bag
• Handlebar
• Backrest
• Armrest
• Front basket
• Footrest
• Cup holder
• Push Rod
• Backrest Adjustment Switch
• Back Footrest
• Back basket
• Front-wheel
• Footrest Pedal
• Brake pedal
• Frame X1

Manufacturer Information

• Importer: Cascade Toys and Games LLC
• Importer Address: 14550 Interurban Avenue South, STE A100
• Email:support@babevy.com
• Manufacturer: Ningbo Elite Cycle Co., Ltd
• Manufacture Address: No.36 PuYan Road, XiaPu Industrial Park,
• BeiLun District, NingBo, China
• Ages: 12-60 Months
• Made in Ningbo, China

Product Usage Instructions

Installation Steps

Step 1: Frame Setup and Front Basket Installation Picture 1:

• Open the frame by following the arrow direction.
• Fix the front basket on the frame.

Step 2: Back Wheel and Brake Pedal Installation Picture 2:

• Install the brake pedal into the rear wheel frame.
• Insert the rear wheel into the corresponding hole on the brake pedal.

Step 3: Canopy Installation and Footrest Setup Picture 7:

• Install the canopy and canopy support.
• Set up the footrest for the baby’s comfort.

Direction for Use

• To adjust the backrest angle, hold the buttons on both sides of the backrest and adjust as needed.

FAQs (Frequently Asked Questions)

Q: What should I do if I notice any loose screws on the tricycle?

• A: Any loose or damaged screw should be replaced instantly to ensure safety during use.

SPARE PARTS

Installation Steps

1. Open the frame
   • Open: Open the back wheel frame in the direction of the arrow as shown in Picture 1.
   • Fold: Press the button under the frame to fold the back wheel frame.
   • Fix the front basket on the frame, then open the handlebars.
2. Back wheels Installation
   • Install the brake pedal into the transverse pipe of the rear wheel frame, and then insert the rear wheel into the corresponding hole on the brake pedal to complete the rear wheel installation (pay attention to distinguish the left and right when installing the brake pedal).
3. Footrest Pedal Installation
   • There is a Footrest Pedal under the frame. You can Unfold the Footrest Pedal when your baby sits on the tricycle.
   • Open: as shown in Picture 3, pull the pull ring to turn over the footrest, and the left and right pedal can be opened to use.
   • Close: Pull the pull ring to turn over the footrest, then fold the left and right pedal.
4. Footrest Installation:
   • Insert the footrest under the frame, align the hole on the pedal with the hole under the frame, and rotate tightly by pedal fixing knob.
5. Front wheels Installation
   • Insert the front wheel as shown in Picture 5. After the installation, please check all the parts, the correct position is impossible to disengage.
   • If necessary, press the front button of the handlebar to remove these parts.
6. Armrest/Canopy/Headrest Installation
   • As shown in Picture 6, connect the canopy bracket to the back of the backrest, and align two circular buckles to the circular hole, then pull down the canopy to fix the hole in the right place.
   • After the canopy is installed, insert the headrest into the back of the backrest along the dotted line.
   • Insert the armrest according to the picture, and note that the side buttons need to be popped and fixed.
7. Canopy Installation:
   • Open the canopy as shown in PICTURE 7, then open the canopy support to finish the Installation.
8. Push rod, back basket, and back footrest Installation As shown in PICTURE 8, insert the push rod into the frame, and then insert the cup holder into the push rod position.
   • Insert the back basket into the slot as shown, then insert the back footrest on the frame.

Direction for use

1. Backrest adjustment
   • As shown in the Picture, hold the buttons on both sides of the backrest to adjust the angle of the backrest.
2. Seat rotation adjustment
   • Press and hold the button to adjust the seat direction.
3. Clutch System Switch
   • UClutch system switch instructions: According to Picture, you can turn the knob switch to switch the pedal state.
   • When propelling, you can switch to the off state, and then the child’s feet can be placed on the pedal to rest.
   • When riding, you can turn it in the opposite direction, then the cycling function can be used normally.
4. The folding function of the tricycle Fold canopy – Remove armrest – Fold handlebars – Fold the backrest – Press the button below the push rod to fold the push rod.

Annotate:

• When we improve the product, the tricycle structure and appearance are subject to change without any notice.
• This manual is adapted to the tricycle series, with pictures for reference only, subject to our available products.

Maintenance

To guard against damage when baby riding, the adult should do inspection and maintenance regularly.

1. Clean the tricycle with a floppy cloth instead of water to avoid degenerating.
2. Check the tricycle bearing and add lubricants regularly.
3. Any screw found to be loose or damaged shall be replaced instantly.
4. Before installation, first read the instructions carefully.

Warning:

1. We urge you to read all of the instructions thoroughly before the installation or operation of this tricycle. This manual should be kept for future reference.
2. Adult assembly is required.
3. Keep away from the street, motor vehicle way, and the area where there are rivers, swimming pools, or obstacles/slopes. Do not close to the fire.
4. Carrying capacity: 25, Adapted age: 12-60 months, Do not overload for safety.
5. Must teach your kid how to use it before first riding.
6. Before riding, the child should wear protective equipment, and the adult should carefully check if the tricycle is damaged.
7. Please keep the kid in view, and ask your kid to keep far away from other children durning riding.
8. Do not put the small parts into the mouth and put away the package to avoid suffocation when riding.
9. Only can afford one child.

• Importer: Cascade Toys and Games LLC
• Importer Address: 14550 Interurban Avenue South, STE A100 Email:support@babevy.com
• Manufacturer: Ningbo Elite Cycle Co., Ltd
• Manufacture Address: No.36 PuYan Road, XiaPu Industrial Park, BeiLun
• District, Ningbo, China
• Ages: 12-60 Months
• Made in ningbo, China

Documents / Resources

| Babevy JY-T08E Baby Tricycle [pdf] User Manual
JY-T08E Baby Tricycle, JY-T08E, Baby Tricycle
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>