KLARSTEIN 10033460 Beef Brisket Smoker Grill Instruction Manual
- June 4, 2024
- Klarstein
Table of Contents
BEEF BRISKET
Smoker Grill
10033460
10033460 Beef Brisket Smoker Grill
Dear Customer,
Congratulations on purchasing this equipment. Please read this manual
carefully and take care of the following hints to avoid damage. Any failure
caused by ignoring the items and cautions mentioned in the instruction manual
is not covered by our warranty and any liability. Scan the QR code to get
access to the latest user manual and other information about the product.
SAFETY INSTRUCTIONS
WARNING
Risk of suffocation! This fire pit is for outdoor use only and shall not be
used in a building, garage or any other enclosed area. Toxic carbon monoxide
fumes can accumulate and cause asphyxiation.
-
This fi re pit is not for commercial use.
-
This fi re pit should only be used by adults and all children and pets should be kept at a safe distance.
-
Do not use petrol, white spirit, lighter fluid, alcohol, or other similar chemicals to light a fi re as a rapid increase in temperature could damage the fire pit. This fire pit is
only suitable for use with charcoal, untreated wood, or dry logs. Do not use coal. -
Do not use this fire pit until it is completely assembled and all parts are securely fastened and tightened.
-
Do not use the fire pit on the decking or any other flammable surfaces such as dry grass, wood chips, or leaves.
-
Always empty this fire pit after use. Leave a thin layer of ash to protect the bottom.
Do not remove ashes or charcoal until they are completely and fully extinguished. -
Do not touch the fire pit until it is completely cooled unless you are wearing heat-resistant gloves as it is hot when in use.
-
Do not handle or move the fire pit when in use as it is hot.
-
Do not attempt to store the fire pit until all ashes and charcoals are completely
extinguished. -
Always use a safety tool and heat-resistant gloves when adding or moving fuel.
-
Do not leave a burning fire unattended.
-
Fire hazard-Hot embers may emit while in use.
-
Do not overload the fire pit with fuel. Do not add additional fuel until the fire burns down. If a portion of the fire bowl is growing red, it is overloaded.
-
Do not burn fuel directly on the fire bowl base.
-
Do keep the fuel away from the wall of the fire pit as the high temperature may damage it.
-
Avoid breathing smoke from the fire and avoid getting it into your eyes.
-
Always thoroughly inspect the fire pit before use.
-
A slight discoloration of the finish may occur after use.
CAUTION!
DO NOT USE SPIRIT OR PETROL FOR LIGHTING OR RE-LIGHTING!
PARTS
No.| Part| Picture| No.| Picture|
Part
---|---|---|---|---|---
1| Grill Body|
| 2| | Grill Grid
3| Grill Lid|
| 4| | Charcoal Grid
5| Smokestack|
| 6| | Wheel
7| Charcoal Grid Handle|
| 8|
| Wheel Axle
9| Handle|
| 10|
| Bottom Grid
11| Front Shelf|
| 12|
| Foot Bracket
13| Front Plate Bracket|
| 14|
| Damper
15| Left-front Foot|
| 16| | Right-front Foot
17| Left-back Foot|
| 18|
| Right-back Foot
No.
| Part| Picture| No.| Picture|
Part
---|---|---|---|---|---
19| Side Box Lid Stand|
| 20|
| Side Box Bracket
21| Side Box Bottom|
| 22|
| Side Box Charcoal Grid
23| Side Box Lid|
| 24| | Side Box Grid
25| Side Box Lid Plate| | 26| | Warming Grid
27| Side Door| | 28| | Damper Locker
29| Side Box Hinge| | 30| | Thermometer
31| Charcoal Pan| | | |
Hardware
ASSEMBLY
Assemble the feet.| Assemble the feet.
Assemble the bottom grid.| Assemble the wheel with 2 pcs M8 Lock nuts.
Assemble foot brackets with 8 pcs M62 screws.| Assemble the side box bracket
with 2 pcs M612 screws.
Assemble the main body with 6 pcs M612 screws and 2 pcs M6 nuts.| Assemble
the lid with 1 pc M620 step screws.
Assemble the lid with 1 pc M620 step screw.| Assemble the smokestack with 2
pcs M612 screws and 2 pcs M6 nuts.
Assemble the smoke stack lid with spring (usually this part was assembled).|
Assemble the handle with 4 pcs M6*12 screws and 4 pcs M6 nuts.
Assemble the warming bracket with 2 pc M615 screws.| Assemble the side box
with 8pcs M612 screws and 2 pcs M6 nuts.
Assemble the handle with 4 pcs M612 screws and 4 pcs M6 nuts.| Assemble the
side box with 8 pcs M612 screws and 2 pcs M6 nuts.
Assemble the side door and damper with 1 pc M612 screw and 1 pc M6 nut
(usually this part was assembled); assemble the damper locker with 1 pc M512
step screw,1 pc M5 nut, and 1 pc M615 step screw.| Assemble the side box lid
stand with 1 pc M510 screw and 1 pcs M5 nut.
Assemble the handle on the side box lid with 4 pcs M612 screws and 4 pcs M6
nuts.| Assemble the side box lid with 4 pcs M510 screw 4 pcs and M5 nuts
(usually this part was assembled).
Assemble the Front shelf with 6 pcs M6*12 screws and 2 pcs M6 nuts.| Assemble
the charcoal grid.
Assemble the grill grid in the body.| Assemble the charcoal grid in the side
box.
Assemble the grill grid in the side box.| Assemble the thermometer on the lid
and finish the assembly.
HERSTELLER
Fabricant
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Deutschland (Germany).
GROSSBRITANNIEN
Importer for Great Britain
Berlin Brands Group UK Ltd
PO Box 1145
Oxford, OX1 9UW
United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>