EATON B127U-110-PH HDMI Over Cat6 Pigtail Receiver with Repeater Owner’s Manual
- June 16, 2024
- EATON
Table of Contents
1000 Eaton Boulevard
Cleveland, OH 44122
United States
B127U-110-PH HDMI Over Cat6 Pigtail Receiver with Repeater
HDMI over Cat6 Pigtail Receiver with Repeater, 4K 60 Hz, 4:4:4, Transceiver,
HDCP 2.2, 230 ft. (70.1 m), TAA
MODEL NUMBER: B127U-110-PH
Works with a B127U-Series transmitter or splitter to extend 4K video via Cat6 cable to an HDMI monitor up to 230 ft. away.
Highlights
- Supports UHD resolutions up to 4K @ 60 Hz (4:4:4) with High Dynamic Range (HDR)
- Lightweight pigtail receiver is USB-powered through display or power adapter
- Can be daisy-chained up to 4 times (920 ft. total) via additional receivers
- Plug-and-play operation with no software required for easy, immediate installation
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
System Requirements
- Source device with HDMI or DisplayPort output (computer, laptop, media server)
- Display device with HDMI input (HDTV, projector, monitor)
- B127U-Series transmitter or splitter
Package Includes
- B127U-110-PH HDMI over Cat6 Receiver
- Owner’s manual
Features
HDMI Extender Receiver Recommended for Digital Signage in Schools and
Businesses
This 4K receiver is recommended for video presentations in conference rooms,
schools, trade shows, meeting facilities, houses of worship, retail settings,
hotels and other digital signage applications where the source and display are
farther apart than conventional A/V cables allow. When connected to a
B127USeries transmitter, the B127U-110-PH helps extend 4K signals from an HDMI
or DisplayPort source to an HDMI monitor up to 230 feet (70.1 meters) away
with zero latency via user-supplied Cat6 cabling. The one-foot pigtail design
makes the receiver easy to install, especially in a tight space.
Transmits 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127U-110-PH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at
60 Hz with uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio.
High Dynamic Range (HDR) provides a wide range of vibrant colors with richer
contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP
2.2 compliance allows you to stream 4K content with no complications. This
receiver also supports 4:4:4 chroma subsampling for top-level PC gaming or
using your HDTV as a PC monitor.
Create Daisy-Chain Installations with HDMI Outputs, DisplayPort Outputs or
Both
The B127U-110-PH can be connected to additional B127U-110-PH HDMI receivers or
B127U-110-PD DisplayPort receivers (sold separately) in a four-link daisy-
chain installation. Each additional receiver adds up to 230 feet (70.1 meters)
to the maximum video transmission distance and up to a total of 920 feet (280
meters) for the entire installation. Note: See the installation diagram in the
owner’s manual for more information.
Multi-Resolution Support Allows Mixing and Matching of Displays of
Different Resolutions
The B127U-110-PH is backward compatible with 4K/30 Hz and 1080p resolutions
via automatic switching, allowing each connected monitor to display video at
its maximum resolution without affecting the other outputs.
Plug-and-Play Operation for Quick Setup and Immediate Use
The receiver works right out of the box with no software required. A one-foot
USB-A pigtail connector is the primary power source. Plug the USB connector on
the receiver into a USB-A power adapter (such as U280-W01-QC3-1, sold
separately) or USB-A port on the connected display. User-supplied 24 AWG Cat6
cabling connects the transmitter and receivers. Note: The receiver can also be
powered through its MicroUSB port.
TAA-Compliant for GSA Schedule Purchases
The B127U-110-PH is compliant with the Federal Trade Agreements Act (TAA),
which makes it eligible for GSA (General Services Administration) Schedule and
other federal procurement contracts.
Specifications
**OVERVIEW**
UPC Code| 037332281463
Product Type| HDMI Over Cat6 Pigtail Receiver with Repeater
Technology| Cat6; HDMI; USB
Host Connector| HDMI (MALE)
**VIDEO
Video Input| RJ45 (FEMALE)
Video Output| HDMI (MALE)
Number of Monitors Supported| 1
Video Ports| HDMI (MALE)
Video Ports Details| HDMI 2.0; HDCP 2.2
Resolutions Supported| Up to 4K (3840 x 2160) @ 60 Hz
Supported Resolutions| 1280×720 (720p); 1920×1080 (1080p); 1920×1200;
2560×1600; 3840×2160 (4K)
Max Supported Video Resolution| 4K x 60 Hz
Max. Distance (Between any 2 Units)| ** 230 ft.
Max. Distance (Between any 2 Units) (Meters)| 70
Max 1080P Range (ft)| 230
Max 1280 x 720 (720p) Range (ft)| 230
Max 1920 x 1080 (1080p) Range (ft)| 230
Max 1920 x 1200 Range (ft)| 230
Max 2560 x 1600 Range (ft)| 230
Max 3840 x 2160 (4K@30Hz) Range (ft)| 230
Max 3840 x 2160 (4K@60Hz) Range (ft)| 230
Receiver/Transceiver Video Output| HDMI
Receiver – Number of Video Outputs| 1
Signal Range (ft)| 230
---|---
Signal Range (m)| 70
Range Extension using other Tripp Lite product| N/A
Recommended Cabling| N202-Series Cat6 Gigabit Snagless UTP Ethernet Cabling
Max Supported Color Depth| 36-bit Deep Color
HDR Support| Yes
3D Video Supported| Yes
Chroma Sub Sampling| 4:2:0; 4:2:2; 4:4:4
Maximum Signal Range (ft)| 230
Maximum Signal Range (m)| 70
EDID Support| Yes
Signal Transmission| Unidirectional
DisplayPort Alt Mode| No
DSC Support| No
AUDIO
Audio Output| HDMI
Audio Specification| Supports passthrough audio formats including LPCM
2.0/5.1/7.1
INPUT
Bus Powered| Yes
Power Source| USB
POWER
Power Source Type| USB
Power Source| Unit (Included)
Power Over Cable (PoC) Support| No
Receiver Power Source| USB
USER INTERFACE, ALERTS & CONTROLS
LED Indicators| x1 Green (Power), x1 Orange (Data)
PHYSICAL
Color| Black
Material of Construction| Plastic
Cable Jacket Color| Black
Cable Jacket Material| PVC
Cable Outer Diameter (OD)| 7.3mm
---|---
Wire Gauge (AWG)| 28
Cable Length (ft.)| 1
Cable Length (m)| 0.30
Cable Length (in.)| 12
Included Mounting Accessories| N/A
Cable Length (cm)| 30.5
Total Number of Ports| 3
Number of Displays| 1
Form Factor/Mounting Options| Pigtail
Rackmountable| No
Receiver Unit Dimensions (hwd / cm.)| 1.86 x 4.7 x 7.5
Receiver Unit Dimensions (hwd / in.)| 0.73 x 1.85 x 2.95
Receiver Unit Weight (kg)| 0.25
Receiver Unit Weight (lbs.)| 0.55
Shipping Dimensions (hwd / in.)| 2.17 x 10.24 x 6.46
Shipping Dimensions (hwd / cm)| 5.51 x 26.01 x 16.41
Shipping Weight (lbs.)| 0.35
Shipping Weight (kg)| 0.16
Unit Dimensions (hwd / in.)| 0.732 x 1.850 x 2.953
Unit Dimensions (hwd / cm)| 1.85 x 4.7 x 7.5
Unit Dimensions (hwd / mm)| 18.5 x 47 x 75
Unit Packaging Type| Box
Unit Weight (lbs.)| 0.176
Unit Weight (kg)| 0.08
ENVIRONMENTAL
Operating Temperature Range| 32° to 104°F (0° to 40°C)
Storage Temperature Range| 5° to 122°F (-15° to 50°C)
Relative Humidity| 0 to 85% RH
COMMUNICATIONS
Max 1024 x 768 Range (ft)| 230
Signal Range (ft.)| 230
Signal Range (m)| 70
Max 480P Range (ft)| 230
---|---
Transmission Distance| 230 ft. (70m)
Max 1440 x 900 Range (ft)| 230
Max 1080i Range (ft)| 230
Max 1920 x 1440 Range (ft)| 230
Max 4K UHD Range (ft)| 230
Max 480i Range (ft)| 230
Max 640 x 480 Range (ft)| 230
Max 800 x 600 Range (ft)| 230
Max 1600 x 1200 Range (ft)| 230
EDID Compatible| Yes
IR Remote Extension Support| No
RS-232 Serial Extension Support| No
Consumer Electronics Control (CEC) Supported| No
Latency| Zero Latency
USB Extension Support| No
CONNECTIONS
Number of Ports| 3
Ports| 2
Ports Detail| Video is carried from the transmitter to the receiver via the
RJ45 portExtend the maximum distance of the installation by daisychaining
B127U-110-PH units via the second RJ45 port on the receiver unit.
Daisy-Chain Port| RJ45 (Female)
Side A – Connector 1| HDMI (MALE)
Side A – Connector 2| USB A (MALE)
Side B – Connector 1| MICRO-USB B (FEMALE)
Side B – Connector 2| (2) RJ45 (FEMALE)
Daisy-chainable / Cascadable| Yes
PORT EXPANSION
Daisy-chainable or Cascadable| Up to 4 layers
FEATURES & SPECIFICATIONS
All-in-One Kit| No
10/100 Ethernet Extension Support| No
Integrated/Removable Cable| No
MST Support| No
---|---
Mounting Accessory Included| No
Multi-Resolution Support| Yes
Built-In Equalizer| No
HDCP Specification| 2.2
Driver Required| No
Recommended Category Cable| 24 AWG Cat6
DIN Mountable| No
STANDARDS & COMPLIANCE
Product Certifications| ICES (Canada); NOM (Mexico)
Product Compliance| CE (Europe); FCC Part 15 Class B (USA); REACH; RoHS3;
Trade Agreements Act (TAA); UKCA; WEEE
WARRANTY & SUPPORT
Product Warranty Period (Worldwide)| 1-year limited warranty
© 2023 Eaton. All Rights Reserved.
Eaton is a registered trademark. All other trademarks
are the property of their respective owners.