TAOTRONICS TT-BH053 True Wireless Stereo Earbuds User Guide

: June 5, 2024
: TaoTronics

Table of Contents

TAOTRONICS TT-BH053 True Wireless Stereo Earbuds
PACKAGE CONTENTS
PRODUCT DIAGRAM
IMPORTANT SAFETY INSTRUCTIONS
HOW TO WEAR
USING YOUR EARBUDS
OPERATION AND FUNCTIONS
CLEANING AND MAINTENANCE
TROUBLESHOOTING
WARRANTY AND SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TAOTRONICS TT-BH053 True Wireless Stereo Earbuds

PACKAGE CONTENTS

TAOTRONICS TT-BH053 True Wireless Stereo Earbuds 1

TaoTronics True Wireless Stereo Earbuds (TT-BH053)
8 x Ear Tips (two are equipped on the earbuds)
1 x USB-C Charging Cable
1 x User Guide
1 x Quick Start Guide

PRODUCT DIAGRAM

TAOTRONICS TT-BH053 True Wireless Stereo Earbuds 2

Multifunction Touch Control
Microphone
LED Indicator
Microphone
Charging Contacts
Charging Slot
Charging Indicators
Charging Case
USB-C Charging Port

IMPORTANT SAFETY INSTRUCTIONS

Please read the instructions thoroughly before using this product and retain it for future reference.
Hearing Safety

Do not wear earbuds with high volume for a long time to avoid damaging your hearing.
Set the earbuds to low volume before you put them on, then increase the volume gradually as per your preference.
Do not set volume too high to stay aware of your surroundings.
Please refer to local laws and regulations if you want to answer phone calls via this device during driving.
For your safety, avoid distraction from music or phone calls when you are driving or doing other activities with potential dangers.
Warning: Please set the volume to proper level to avoid hearing damages.

Caution

Do not expose this product to high temperatures.
Do not immerse the earbuds into water or expose them to humidity for a long time.
Do not clean the product with detergent containing alcohol, ammonia, benzene or abrasives.
Avoid dropping.
Place the earbuds back into the charging case when not in use and keep it away from children and pets to avoid choking hazard.
Unauthorized disassembly of any parts of this product is forbidden, which may cause ﬁre hazard, warranty voidance, and/or property loss.
Close attention is needed when using near children.
Keep the charging case away from water, rain or any other liquid.
Don’t use the product in thunderstorm to avoid malfunction or electric shock.
Always ask a professional technician or authorized personnel for repair.

This product contains lithium battery. Never expose it to excessive heat such as direct sunlight or ﬁre to avoid explosion.

HOW TO WEAR

Choose the Right Tips
Ear tips with different sizes are included in the package, try all sizes and choose the ones ﬁtting you best.

TAOTRONICS TT-BH053 True Wireless Stereo Earbuds 3

Wear the Earbuds
Please wear the earbuds as shown below.

TAOTRONICS TT-BH053 True Wireless Stereo Earbuds 4

Pictures only for reference.
Bluetooth Caution

When the device is connected wirelessly to another device, place the two devices close to each other to achieve their normal functionalities and avoid possible signal interference.
The maximum effective Bluetooth range may vary with the environmental circumstances.
When using a wireless connection, make sure there are no obstacles between the two devices. Obstacles including walls and fences may shorten the effective range.

USING YOUR EARBUDS

Charging the Earbuds

Put the earbuds into the charging case as per the L (left) and R (right) marks
Charging will start automatically. The LED indicator will ﬂash blue slowly when charging and turn off when charging is completed

Note:

Please fully charge the earbuds when using them for the ﬁrst time.
When battery is low, a “Battery low” voice prompt will be heard (if you are wearing the earbuds). Please charge it in time or the earbuds will turn off automatically around 10 minutes later.
Charge the earbuds at least once every 6 months when not using for a long time.

Charging the Case

Connect the charging port with any USB charging adapter or active computer USB port. (Fig. 7)
The four charging indicators will light up progressively.

Note: Unplug the charging cable (timely) when fully charged.

TAOTRONICS TT-BH053 True Wireless Stereo Earbuds 7

Power On
Uncover the lid and they will power on automatically.

Power Off
Place the earbuds into the charging case and close the lid, they will turn off automatically.

TAOTRONICS TT-BH053 True Wireless Stereo Earbuds 9

Pairing

You can use one earbud or both earbuds as per your preference. Please refer to the corresponding pairing instructions.
Before pairing, please turn off other Bluetooth devices and place the device to be connected close to the earbuds.

Couple Earbuds Mode

Uncover the lid to turn on the earbuds, they will connect with each other automatically. Once connected, The LED indicators on both earbuds will ﬂash blue and white alternately indicating the earbuds are in pairing mode now.
Turn on the Bluetooth function on your device and search for nearby devices. Find “TAOTRONICS SoundLiberty 53”in the searching results, tap on the name to connect.
Once connected, the LED indicators on both earbuds will ﬂash blue slowly.

Note:

The earbuds can remember the devices paired previously, and will attempt to pair with the last connected device. If re-pairing failed, the earbuds will enter pairing mode.
It is not recommended to wear the two earbuds on different people. If necessary, please keep the two earbuds close to each other in couple earbuds mode.

Single Earbud Mode

Take out one earbud from the charging case, and make sure the other one is placed in the charging case and the lid is covered.
It will try to pair with the last paired device ﬁrst then enter pairing mode with its LED indicator ﬂashing blue and white alternately if pairing failed.
Turn on the Bluetooth function on your device and search for nearby devices. Find “TAOTRONICS SoundLiberty 53”in the searching results, tap on the name to connect.
Once connected, the LED indicator will ﬂash blue slowly.

Note: If you want to change to couple mode, simply take out the other earbud from the charging case, they will pair with each other automatically. Clear Pairing List If you failed to pair your device with the earbuds, please clear the pairing history as instructed below:

Place both earbuds in the charging case.
Press and hold the Multifunction Touch Control of both earbuds for 10 seconds until the LED indicators on both earbuds ﬂash white three times.
If you have paired your device with the earbuds before, remove “TAOTRONICS SoundLiberty 53” from the Bluetooth device list and pair again.
Re-pair with your Bluetooth® device as instructed in “Pairing” section.

Note:
If you want to pair the earbuds with another device when you have already paired them with a device, deactivate the Bluetooth function on the paired device or clear “TAOTRONICS SoundLiberty 53” from its Bluetooth list. Restore the earbuds to factory settings as instructed above if pairing failed.

OPERATION AND FUNCTIONS

/

Hang up Phone Call| Tap and hold the Touch Control on either of the earbuds for 2 seconds| /
Decline an Incoming Call| Tap and hold the Touch Control on either of the earbuds for 2 seconds|

Call rejected

Turn On / Off Voice Control

| When paired successfully, tap and hold the Touch Control on either of the earbuds for 2 seconds until a beep is heard.|

Toot

| |
Clear Pairing List| Refer to the “Clear Pairing List” section| /
---|---|---
Go into Pairing Mode| Refer to the “Pairing” section| Pairing
Successfully Paired| /| Connected
Bluetooth out of Range /

Disconnected

|

/

|

Disconnected

Note: Only when you are wearing the earbuds can you hear the voice prompt.

CLEANING AND MAINTENANCE
1. Clean the earbuds and the charging case on a regular basis.

2. Use dry and soft cotton cloth to wipe the unit.

Note: Do not insert anything into the product.

3. Keep away from sharp objects to avoid scratches.

4. Put the unit in a dry and shady place if it is to be idle for a long time.

5. Do not clean the product with detergent or chemicals.

Note: Only when you are wearing the earbuds can you hear the voice prompt.

CLEANING AND MAINTENANCE

Clean the earbuds and the charging case on a regular basis.
Use dry and soft cotton cloth to wipe the unit.
Note: Do not insert anything into the product.
Keep away from sharp objects to avoid scratches.
Put the unit in a dry and shady place if it is to be idle for a long time.
Do not clean the product with detergent or chemicals.

TROUBLESHOOTING

No.| Problem| Solution
1| Failed to turn on the earbuds| Earbuds low battery, please charge them

2

| Failed to charge the earbuds| • Place the earbuds into the charging case properly

• Make sure the charging case is charged fully

3| Can’t charge the charging case| Make sure the charging cable is intact and plugged in properly
|

Can’t find

| The earbuds reconnected with previously paired device automatically:

• Deactivate the Bluetooth function of previously paired device or clear “TAOTRONICS SoundLiberty 53” from its Bluetooth device list, and then search again

• Put the device to be connected close to the earbuds

4| “TAOTRONICS

SoundLiberty 53” in the

| Bluetooth device list

5

| Failed to pair the earbuds with your device| • Turn on the device and activate its Bluetooth function before pairing

• Bring the earbuds into pairing mode as instructed in the “Pairing” section

6

|

No sound in one of the earbuds in couple earbuds mode

| Place both earbuds back to the charging case then take them out, they will pair with each other automatically. If pairing failed, restore them back to the factory settings as instructed in the “Clear Pairing List” section

7

|

Poor sound quality

| • Wear the earbuds properly and keep them close to each other.

• Place the connected device close to the earbuds or remove the obstacles between them

• Clear the debris on the earbuds

---|---|---

8

|

Unstable connection

| • Keep the earbuds close to your Bluetooth device

• The effective distance may shorten with obstacles in the way