TAOTRONICS TT-SK035 Wireless Soundbar User Guide
- October 27, 2023
- TaoTronics
Table of Contents
Model: TT-SK035
Wireless Soundbar
User Guide
Product Diagram
| Top Panel | TIndicators on the Display | Rear Panel |
|---|
1. Power Button
2. Mode Selection
3. Volume +
4. Volume –| 5. ARC
6. Optical
7. AUX
8. Bluetooth
9. Games
10. Music
11. Video| 12. Power Input
13. Optical Input
14. AUX Input
15. ARC Input
Remote Control
1. Power Button
2. EQ switch
3. Mute
4. Volume +
5. Next Track
6. Volume –| 7. Previous Track
8. Play / Pause
9. ARC mode
10. Optical Mode
11. AUX Input
12. Bluetooth Mode
---|---
Warning
- To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
- Do not use chemicals or detergents to clean the product. Clean only with a dry cloth.
- Do not scrape the surface with sharp objects.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Keep the sound bar away from extreme heat and humidity, and do not expose to direct sunlight.
- Do not install near any heat sources such as radiators, heat registers, stoves, etc.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the device.
- Unplug this device during lightning storms or when unused for long periods of time.
- To reduce the risk of electric shock, do not remove the cover (or back).
- No user-serviceable parts are inside. Please refer servicing to qualied service personnel.
- Do not drop or knock your sound bar on hard surfaces as it may damage the interior circuits.
Package Contents
- 1 x Taotronics Sound Bar (TT-SK035)
- 1 x Remote Control
- 1 x RCA to 3.5mm Audio Cable
- 1 x Optical Cable
- 1 x User Guide
- 2 x Wall Mount Screws
- 1 x DC Adaptor
Button Control (Top Panel & Remote Control)
Power On / O| Press the Power Button and the mode indicator will light up / go
off on the display.
---|---
Volume +| Press the Volume + button
Volume| Press the Volume – button
Mode Selection| When the sound bar is on, press the corresponding mode button
to select the Optical / AUX / ARC/ Bluetooth /
Games / Music / Video mode, and the corresponding indicator will light up.
The soundbar supports ARC, compatible with all devices with ARC.
Note: To disconnect a Bluetooth device, press and hold the Bluetooth Mode button on Remote Control for 2-3s, or the Mode Selection button on the sound bar for 5-6s. The Bluetooth Mode indicator will fiash when waiting for a reconnection.
Specifications
| Power Supply | DC 24V 2.5A |
|---|---|
| Power Consumption | 50W |
| S/N | ≥70dB |
| Response Frequency | 60Hz-20KHz |
| Working Temperature | -10°C – 35°C / 14°F-95°F |
| Dimensions | 80 x 6 x 6cm / 31.5 x 2.4 x 2.4in |
| Weight | 1765g±5g / 61.6oz |
Connections
Cable Connection
Note: Please plug the appropriate cable into the corresponding port to
connect the device, then select the corresponding mode.
Bluetooth® Connection
- Turn on the sound bar and select the Bluetooth® mode.
- Activate the Bluetooth® function on your device and search for devices nearby.
- Find “TT-SK035” in the search results and tap to connect. A beep will be heard upon a successful connection.
- The Bluetooth® indicator will turn solid on upon a successful connection.
Note:
- The Bluetooth indicator will keep flashing when the sound bar is pairing.
- Please make sure no other active Bluetooth® devices are within range, and that the sound bar is within 3ft / 1m away from your device.
- It’s not recommended to pair the sound bar with your TV Bluetooth for it may cause audio delay.
- Before starting to play via Bluetooth, please lower the volume to a moderate level.
Troubleshooting
Q: Why is the unit not turning on?
– A: Please check and make sure the power cord is correctly connected to a power source.
Q: Why is there no sound or why is the sound is distorted?
– A: Please go over the following:
• Check to make sure the audio cable is correctly connected.
• Turn up the volume slowly.
• Press the Mute button to switch on the sound.
• Press the Play / Pause button.
• Set the audio output mode on your TV (if applicable) accordingly with the
mode setting on the sound bar.
Q: Why do the buttons on the sound bar not work?
– A: Switch off the sound bar and unplug. Then connect it to a power supply and switch it on again.
Q: Why does the remote control not work?
– A: Please go over the following:
• Install 2 AAA 1.5A batteries into the remote.
• Replace the current batteries with new ones.
• Make sure the remote control is pointed to the sound bar during use.
• Make sure the remote control is within operating range.
• Switch off the sound bar and disconnect the power. Then reconnect and power
it on, try again.
Q: Why can’t I disconnect the device by pressing the Bluetooth Mode button?
– A: You need to press and hold the Bluetooth Mode button on Remote Control for 2-3s, or the Mode Selection button on the sound bar for 5-6s to disconnect a Bluetooth device. The Bluetooth Mode indicator then will flash when waiting for a reconnection.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sunvalleytek International Inc. is under license. Other trademarks and trade names are those of their respective owners.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit difierent from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources. Household users should
contact either the retailer where they purchased this product, or their local
government ofice, for details of where and how they can take these items for
environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contract. This product and
its electronic accessories should not be mixed with other commercial wastes
for disposal.
E-mail:
support@taotronics.com
Manufacturer:
Shenzhen Danya Technology Co.,Ltd.
Address:
Room 3323, Building C, Galaxy World Phase II, Minle Community,
Minzhi Street, Longhua District, Shenzhen, Guangdong,China
Learn more about the EU Declaration of Conformity:
https://www.taotronics.com/pages/user-
manualwww.taotronics.com